ReviewsFuel Oil Hose

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

  • Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Inner core PTFE has excellent corrosion resistance..
  • Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
  • Features: Maximized Resistance to Heat, Corrosion and Abrasion.
Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

  • The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ (-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
  • 6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Hose Clamp Pliers Set, 9pcs Wire Long Reach Hose Clamp Pliers Set for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps, Clamp Removal Tool by BOOTOP PIN

  • 9PCS Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps.
  • Hose Clamp Pliers For replacement of fuel, oil, and water hose.
  • Hose Clamp Tool Pliers for the removal and locking of clamps into open position..
  • Universal Hose Pliers Set Includes long-reach cabled hose clamp pliers(Flexible Hose Clamp Pliers), Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Locking Design: The 5 spring-clamp pliers are capable of locking in place to free your hands and speed up your repair work. Long reach hose clamp plier with wire flexible wire shaft convenient for working hidden areas and long distance. Perfect Fit: Having purpose-built tools will eliminate time-consuming work arounds and jerry rigging, making your hose work a breeze. This hose clamp tool box set works with plastic and metal hose clamps from 11/16 inch to 2 1/2 inches..
  • Automotive hose clamp pliers set may also know as hose clamp tool, hose clamp tool pliers,....
Check Stock

Portable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank

  • The 6.3-gallon marine fuel tank is made of high-density polyethylene, which is anti-aging, impact-resistant and corrosion-resistant. It can bounce back naturally after an impact without permanent deformation..
  • Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use(High-quality spring designed for deflation, Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage..
  • With An Oil Volume Indicator- Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the fuel tank to ensure clean fuel..
  • Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
  • Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1....
Check Stock

Qwix Mix Windshield Washer Fluid Concentrate, 1 Gallon Makes 500 Gallons - 100% Biodegradable Grime & Dirt Remover, Superior Commercial Grade Glass Cleaner, Single…

  • 6AN to 12mm Banjo fitting - Hose end adapter ( M12-AN6).
  • Compatible with 3/8 regular or 6AN braided hose.
  • Suitable for all fluids - Fuel, oil, coolant, water, air, etc...
  • Adapter for fuel rail, fuel filter, fuel pump, oil coolers, etc....
  • What's in the box: (1) Banjo adapter (2) Washers.
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Diesel Water Parking Heater Hydronic Heater 5KW 12V Boat Caravan Motorhome Truck Camper Trailer Remote Control Diesel Water Heater Kit

  • ...e parking heater uses automobile coolant to exchange heat, preheats the engine and the cab, solves the problem of difficult engine startup at low temperature, greatly reduces air-cooled wear caused by low temperature startup, and extends engine life by more than 30%..
  • LESS FUEL PREHEATING ➤ Compared with cold-start engine preheating, the water heating parking heater preheating consumes less fuel. In the cold winter, you can warm up the engine and cab before getting on the car to drive away the severe cold. Improve the driving environment and no longer need a warm store..
  • FULL INSTALLATION SET ➤ 1 x Water Parking Heater, 1 x Auto Switch And Remote Control (Batteries Not Included), 1 x Water Pump, 1 x Wiring Harness, 1 x Tube, 1 x Oil Pump, 1 x Pump Holder, 1 x Fuel Filter, 1 x Oil Tube, 1 x Big Elbow, 1 x Small Elbow, 1 x Air Inlet Hose, 1 x Exhaust Pipe, 1 x Exhaust Silencer, 1 x Hose Holder, 1 x Cross, 1 x Air Filter, 6 x Short Pipe, 1 x Oil Extractor, 12 x Hose Clamps, 12 x Small Hose Clamp, 5 x Screwiv, 4 x Screw, 1 x Iron Stent..
  • TECHNICAL PARAMETERS ➤ Material: Metal & Plastic.
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black

  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
  • Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Fuel Line 3/8 Inch ID NBR Fuel Line Hose 6AN Push on Hose for Small Engine 10 Feet

  • Size: ID: 3/8" (10mm), OD: 5/8 inch (16mm), AN6 Fuel Hose, Length: 10FT..
  • Material: This small engine fuel line is made of high-quality NBR, which is oil resistant..
  • Working Pressure: 0.6Mpa, Burst Pressure: 1.8Mpa, Temperature Range: -40°F to 248°F..
  • Application: Designed for conveying gasoline, diesel, biodiesel fuel, engine oil or water in car, truck, bus, automotive, etc. Please check the pressure of application before purchase..
  • How To Use: Use hose barbs and fuel line clamps to install..
Check Stock

Delta 480002 Black L-Shaped Steel Tank

  • [MULTI PURPOSE GAS CADDY] This portable caddy can safely store and transfer up to 30 gallons of Mixed fuel, Fuel Oil, Industrial Coolant, Medium Oil (Up to 30W), Hydraulic fluid. Perfect for fueling your car, lawnmower, ATV, boat, motorcycle, whether at home or on the go..
  • [TWO WAY ROTARY PUMP] 2-way rotary pump allows you to dispense or siphon fuels with ease, making pumping and refilling efficient. The wide fill neck helps faster refills with less spillage, reducing fuel wastage and saving you money..
  • [EASILY PORTABLE] Heavy-duty flat-free tires provide greater portability and the brake casters deliver anti-skid support to prevent the caddy from moving or skidding during the refueling process..
  • [HIGH CAPACITY TANK] This 30 gallon container holds sufficient fuel that can be used for multiple purposes such as refueling or keeping gas-powered equipment running..
  • [8 FT KINK FREE HOSE] Kink-free hose ensures maximum flow of the fuel, which makes the process faster and more convenient. An easy-to-read fill gauge allows you to quickly determine the amount of fuel inside the caddy..
Check Stock