ReviewsFuel Oil Hoses

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
middle layer: 304 stainless steel wire mesh sleeve.
outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..

Check Stock

DURATECH 6pcs Hose Clamp Pliers, Pinch Pliers, Line Clamp Pliers Set for Flexible Hoses Fuel Hoses Gas Lines Brake Hoses Radiator Hoses

3 Different Sizes: This set comes with 6 red color fuel line clamps in 3 different sizes. Small 1/8-in to 5/16-in, Medium 1/2-in to 3/4-in, Large 3/4-in to 2-1/4-in..
Insulation Material: Our Line Clamps are made of PA6. Heat resistant reinforced nylon construction, non-conductive to ensure security. And with liquids like fuel, these help keep you safe!.
Wide Application: These hose clamp pliers are great for use on flexible hoses, such as brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more. NOT for use on hard, reinforced, or high pressure lines..
Anti-Slip Handle&Safety Buckle: The grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue. With security card buckle, these pliers can lock into position leaving your hands free to repair..
Make Repairs Easier: Using hose clamp pliers helps keep the mess to a minimum. Our plastic clamp pliers close off flexible hoses while leaving them undamaged. The smooth, Special-radius jaws and rounded jaw edges can effectively prevent damage to internal hose reinforcement..

Check Stock

Straight 45 90 Degree Fuel Push On Push Lock Hose End fittings 10-P (Red, AN6-45 Degree)

Condition: Brand New. Never been used or installed.
Material: High Quality 6061 Aluminum Alloy.
Fitments: These hoses are sized correctly. They are perfect for fuel lines.
Application: Oil, fuel, fluid, water or air.

Check Stock

0-140 PSI Fuel Injector Pump Injection Tester Test Fuel Pressure Gauge Kit Car Tools,Fuel Injection Pressure Tester Updated TU-114 Fuel Pressure Tester Kit Gas Oil Pressure Tools for Cars and Trucks

▲ Universal Design:The included adapters, hoses and fittings cover all fuel injection systems and most cars, auto and vehicles..
▲ Ideal For Mechanics:Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste..
▲ Durable: Designed for repeated use with high quality materials,Anti-corrosion materials to ensure long lasting using life..
▲ Easy Installation and Help to indicates if fuel pump is defective or inconsistent in pressure flow..
▲ It is a fuel injection pump pressure,oil combustion spraying pressure gauge tester,Easy to read dual scale gauge,A carry case for protable taken and so conveninet..

Check Stock

Joywayus 1/4 Brass Barb Tee Fittings T-Shaped 3 Ways Union 1/4 ID Hose Pipe Fitting with 6pcs Stainless Steel Pipe Clamp for Water/Fuel/Air Pack of 2

Product Size: 1/4" ID hoses x 1/4" ID hoses x 1/4" ID hoses.
Branch tee for connecting and branching three hoses,easy to install.
Packaging Includes: 2 Brass hose tee connectors with three barb , 6 Stainless steel pipe clamps.
Commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
Material: Made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.Pipe clamps are all made of stainless steel..

Check Stock

JoyFans Fuel Pressure Test Kit, TU-114 Fuel Injector Pump Pressure Tester Automotive Tool with Gauge Adapter for Schrader Test Port Fuel Injection System on Car Motorcycle Blue Case

Built to Last: Fuel pump tester kit supplies with a full series of precision-machined adapters making it universal for most vehicles. Adapters constructed from high-quality metal comes in a variety of sizes for added suitability. Resisting oil, rust and corrosion, ensures years of reliable use. Hoses adopt reinforced rubber nylon resin, withstand torsion, temperature, and pressure. 8" short hose ends with brass fittings, 2pcs cut hoses size: 1/4"I.D. x 3-1/2"L, 3/8"I.D. x 3-1/2"L..
Considerate Service: We are always glad to offer customers satisfactory shopping experience and after-sales services. We have 30-day free return for the products in good undamaged unused condition after you have received the parcel. Each item offers 12-month quality warranty, and it will be packed well to prevent the breakage during the transportation, please purchase and use with confidence. If you have any questions, please feel free to contact us..

Check Stock

12V Fuel Transfer Pump, Diesel Transfer Pump with Nozzle Hose for Diesel, Kerosene, Machine, Transformer Oil, 12 GPM Self Priming DC Electric Diesel Fuel Transfer Pump Kit.

...The internal bypass valve effectively protects the diesel pump motor from burning when it is clogged.
it is also equipped with a metal filter that filters out impurities in the diesel fuel while pumping to protect the pump from damage..
【Compact and Portable】：Pumps, hoses and nozzles are small, reliable and simple to install, all designed to be portable with ergonomic handles to assist.
the whole package is compact enough for efficient storage..
【Attention】：Not suitable for low flammability fuel (such as gasoline, liquefied petroleum gas, alcohol, etc). We recommend to always wear eye and hand protection during operation，all our products are factory inspected and must pass a trial, so it is normal for products to have the smell of diesel..

Check Stock

ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch

SAVE COOLANT & SAVE TIME: The ABN Hose Pincher Pliers 3-Piece Crimping Pinch-Off Tool Set – Automotive Pinching Radiator, Coolant, Heater, Fuel Pinch is a lifesaver when performing fuel line or coolant maintenance.
Easily pinch off cooling hoses instead of losing coolant and it spilling all over engine on certain jobs such as valve cover gasket replacements.
No need to drain systems before servicing.
Ratcheting jaws allow for automatic locking to save you even more time.
EASY TO USE: Simply use the ratcheting mechanism on the pliers to close the jaws and squeeze shut your desired hose.
Plier jaws swivel to ensure a complete shut off.
3-IN-1 SET: Package includes (3) pinch off pliers – a small 8-inch (20.3cm) long tool with a 1.5-inch (3.8cm) contact area, 10-inch (25.4cm) long tool with a 1.75-inch (4.4cm) contact area, and 12-inch (30.5cm) long tool with a 2-inch (5.1cm) contact area.
VARIOUS APPLICATIONS: Small 8-inch plier works great for pinching off small engine fuel hoses or fragile 1/4-inch (6.4mm) plastic water lines under your kitchen sink.
Medium 10-inch and large 12-inch pliers clamp off radiator hoses on coolant recovery tank.
This entire set can safely be used on washing machine drain hoses, automotive hose lines, radiator lines, fuel l....

Check Stock

QWORK Car Hose Remover Pliers, Auto Fuel and Vacuum Line Tube Hose Remover, Separator Pliers Pipe Repairing Tool

Function: This Hose Remover Pliers can easily removes stubborn hoses on pumps,tanks, radiators,air cleaners, etc..
Suitable for: It is suitable for use with vacuum hoses or fuel lines that have a diameter measurement range from 5/32" to 1/2"..
Compatible Hoses: Compatible with a variety of difficult dis-assembly pipes such as trachea, power assisted tubing, heat radiating oil pipe, water pipe, etc..
High Quality: Made from premium steel, anti-corrosion, durable and not easy to break, for long term service..
100% Satisfied Service: Enjoy a smooth&worry-free return service within a month. Any questions feel free to contact us, we will be here for you..

Check Stock

LJSF clamp 2 Pieces of 304 Stainless Steel Hoop Extension Welding nut Round Hose clamp Suspension Pipe clamp Industrial Household Fasteners Simple to use and Durable (Size : 15 19MM)

5-22mm spring clamp fuel pipe hose water pipe air pipe clamp fastener.
Suitable for air hoses, water pipes, fuel pipes, silicone vacuum hoses.
These spring clips are made of 65 Mn spring steel.

Check Stock

XtremeAmazing Replacement for 5/16\ Fuel Injection Hose Clamps (Pack of 10) 1/2\ - 9/16\ Dia

1.【Value Package Including】: The hose pinch off pliers kit has 6PCS flexible hose clamps, including 2PCS 6-1/2 inch, 2PCS 7-5/16inch, 2PCS 10inch in length..
2.【3-IN-1 Hose Clamps】: 3 pinch off pliers --- A small 6.1-inch (15.5cm) long tool with a 0.8-inch (2cm) contact area, 7.3-inch (18.5cm) long tool with a 1.5-inch (3.8cm) contact area, and 10-inch (25cm) long tool with a 3-inch (7.7cm) contact area. This hose plier set can clamp hoses with diameters of 15mm, 20mm and 25mm.Included 3 Sizes To Fit All Types Of Hoses..
3.【High Quality Kit】:The heater core flush kit is made of premium Plastic material,which is anti-rust and durable.The handle of the fuel hose pliers is designed for anti-slip spiral shape, improving your working efficiency and reducing exhaustion of your hand..
4.【Non-Damaging Jaws】Hose clamp pliers are made of safe nylon ,Non-conductive, durable.Rounded jaw edges mean not damage your sensitive auto parts..
5.【Wide Application】:Great for use on brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and great for working on cooling systems, Built-in locking mechanism..

Check Stock