ReviewsFuel Oil Recycling

WTMORE Boat Fuel Tank 3 Gallon 12L, Marine Outboard Motor Fuel Tank w/Connector, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red

  • Built to Last- This boat fuel tank is made of high density polyethylene, low permeability, anti-aging, impact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
  • Fuel Up With Ease- Marine portable fuel tank 3 gallon (12 litre) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of boat fuel tank and outboard engine, fuel up with ease. It's perfect for small to large boats, inflatables, canoes and even kayaks..
  • Scientific Design- I-shaped lifting handle design is more ergonomic. It's light weight compact, easy to carry, easy to stow, durable and strong. The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling..
  • With Filter- A filter is built into the air inlet of the portable marine fuel tank to ensure clean fuel. Marine outboard motor fuel tank features a fine mesh input spout so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • With Fuel Gauge- Marine fuel tank provides a high contrast fuel gauge to accurately monitor the level of remai....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1,6AN PTFE straight hose end*6,6AN PTFE 45 Degree hose end*2,6AN to 3/8" hose adapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

  • 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
  • Control System: Tiller control Starting System: Manual start..
  • 【Details】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【Advantages】water cooling technology improves the reliability of the whole machine.
  • light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check Stock

Firefly Kosher Clean Fuel Lamp Oil – Smokeless/Virtually Odorless – Longer Burning – 1 Gallon

  • THIS IS NOT BIO-FUEL. NOT FOR USE IN FIRE PITS, FIREPLACES OR VESSELS REQUIRING AN ETHANOL-BASED FUEL. Alternative, longer burning fuel than paraffin....
  • CLEAN BURNING, ODORLESS, SMOKELESS & CLEAR - Be sure to use a NEW wick and keep the height as low as possible, about 1/16” above the wick holder.....
  • SCREW-ON POUR SPOUT FOR EASY REFILLING: Included with every 32-Ounce bottle of Firefly Fuel which makes refilling your oil candles and oil lamps super....
  • USE RECOMMENDATIONS: For use in liquid oil candles, oil lamps, DIY mason jars, hurricane lanterns that use a small wick. Safe for Indoor & outdoor....
  • WHERe NOT TO USE - Not for use in table-top fireplaces, effusion lamps or catalytic lamps that require gel fuel or alcohol-based fuels. Firefly CLEAN....
Check Stock

Portable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank

  • The 6.3-gallon marine fuel tank is made of high-density polyethylene, which is anti-aging, impact-resistant and corrosion-resistant. It can bounce back naturally after an impact without permanent deformation..
  • Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use(High-quality spring designed for deflation, Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage..
  • With An Oil Volume Indicator- Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the fuel tank to ensure clean fuel..
  • Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
  • Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1....
Check Stock

SuperHandy Mini Wood Chipper Shredder Mulcher Heavy Duty 7HP Compact Design 3\ Inch Max Capacity

  • .... Max speed: 3600RPM,Max torque: 9.14ft-lbs@2500RPM (ENGINE OIL NOT INCLUDED).
  • SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection.
  • Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves, and corn stocks.
  • DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines. Can be used to aid in fire prevention and building firebreaks..
Check Stock

Mophorn 8AN Fuel Line, 20 Pcs 8AN Fuel Hose Kit, 32.8Ft BK Nylon Stainless Steel Braided Oil Line Hose, NBR CPE Synthetic Rubber AN8 Gas Line, 8AN Universal Fitting Adapter Set with Aluminum Hose End

  • Superior Oil Fuel Line: 8an fuel line kit is made of premium material, features a lightweight nylon fiber outer braid over a durable rubber core to strengthen its durability. It can stand high-temper, and pressure, with long-lasting lifespan. Max working pressure 300psi. Burst pressure 1000psi..
  • Flexible & Durable: The 8an hose oil line is constructed with a seamless extruded CPE synthetic rubber tube, resisting extreme heat, abrasion, and corrosion, providing minimum resistance to flow. Viscous materials will not cling to. With less volumetric expansion than the other tube..
  • 8an Standard Dimension: This steel fuel line build as standard 8an size, with inside diameter 11.11 mm/ 0.44 in, outside diameter 16.2 mm/ 0.63 in. Working temperature range: -40℉ to 350℉. It is compatible with nearly every substance or agent used. Oil fuel line length: 10 m/ 32.8 ft..
  • 20 Pics Hose End Kit: Each nylon and stainless steel braided oil fuel line kit included 20pcs 8an hose ends (8pcs straight, 4pcs 45 degrees, 4pcs 90 degrees, 4pcs 180 degrees) and 32.8ft braided fuel line. Fitting professionally to manifest its best performance..
  • Suit for Various Uses: Fuel line widely used in the fuel system, transmission system, cooler system, and pump. It can be worked with rac....
Check Stock

BYS No VRO Fuel Pump PreMix Conversion Kit for Johnson/Evinrude/OMC 5007422

  • ➱ Brand new VRO Fuel Pump for Johnson 1991-1998 /Evinrude 1991-2001/OMC.
  • ➱ Replace Part Numbers: 0438402, 0435954, 0435596, 5007422..
  • ➱ Fitment: for Johnson 1991-1998 /Evinrude 1991-2001/OMC..
  • ➱ No oil pump side and no wiring for the oil pump warning system. Pre-mixed fuel oil is required when you use this fuel pump.
  • ➱ Package Includes: 1x Fuel Pump set as images display..
Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

  • 6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
  • Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

6AN 5Feet Stainless Steel Nylon Braided Fuel Line Hose Oil Gas Hose Oil Line Hose Silver

  • 【Material】Outside Hose Material: Coverd with High Quality Nylon and Stainless Steel Wires.
  • Inner Hose Material: CPE Synthetic Material Hose..
  • 【CPE Braided Hose】Mostly can be work with coolant, diesel, oil, hydraulic fluid, pump gas, air and fuel. Please notice that the service life might be shorter when it work with fuel..
  • 【Application】This braided hose can be used in brake system, fuel pump, fuel filter, oil return, fuel return system, turbo cooler system, and transmission system, oil cooler kit, ect..
  • 【Performance】Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • 【Note】Not recommended installation in corrosive environment, braided fuel line's service life will be influenced..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock