ReviewsFuel Pump Injector

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

...se rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to release pressure safely and recovery fuel easily. Blow molding case keeps everything in place and protects the gauges during storage..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure tester is designed for checking fuel injection pump pressure and fuel flow easily and quickly. You can compare the pressure value to the manufacturer's recommended reference range, aid to diagnose gasoline engine fuel system. Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure. High fuel pressure may be caused by a bad fuel pressure regulator or kinked outlet return line.
SATISFACTORY CUSTOMER SERVICE: 30 days full refund with returned undamaged JIFETOR fuel pump pressure tester gauge. Any quality related problem in 1 year, we will replace the fittings for free or refund. Any question, please feel free to contact us by email or amazon message system, we will reply ASAP in 24 hours. Please check if the kit fits for your vehicles or not before biding or as soon as receiving, if not, please return for full refund, or contact us f....

Check Stock

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

Brand New Holley Sniper EFI Stealth 4150 4 BBL Fuel Injection Master Kit,870 CFM, Gold, Compatible with 4150 Flange Style Manifolds (Holley Part #550-872K).
Specs: Brand: Holley Sniper EFI | CFM: 870 | Emission Code: 3 | Finish: Gold | Flange Style: 4150 | Fuel Pressure: 58.5 PSI | Height: 3.28 | Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female.
Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female O-Ring (AN 8) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel....

Check Stock

AUTOOL GDI Fuel Injector Cleaner & Tester 110V Ultrasonic Wave Fuel Injection Leakage Tester 6-Cylinder Automotive Fuel Injector Cleaning Machine

【Why Need It】The performance of the injector plays a vital role in the power of each engine. Due to the fuel quality, the injector cannot work normally, causing serious carbon deposits in the cylinder.
accelerating the cylinder bore and piston ring, causing unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, excessive emissions, and complete blockage of the injector. Cause damage to the engine, so the injector should be cleaned regularly..
【GDI Design】 Adopts latest GDI design, it is not only can be used to clean and test standard injectors, but also to implement GDI injectors, AUTOOL CT400 GDI fuel injector cleaner and tester is the newest version of fuel injector cleaner series. Compatible with Mercedes-Benz, BMW, Audi, Porsche, Ford, and other direct injection engines..
【12V, 70V, 120V】 Using the latest and unique GDI injector driver software, AUTOOL CT400 6-cylinder fuel injector cleaning machine can drive 12V, 70V, 120V high pressure injectors，Compared with other cleaning machines and testing machines, AUTOO CT400 is equipped with a cooling fan and thermal protection, with a power of 60w. Equipped with a cooling....

Check Stock

100 GPH Lift Pump Filter 6.6L Diesel Compatible with Chevy/GMC Duramax 2001-2010 6.6L Diesel Engines A4SPBC085

AFTER SALES - Our products provide 3 years free replacement and lifetime warranty service, you can contact us at any time..
FUNCTION - Lift pump filters offer effective technology specifically designed to remove water, particulates, vapors and entrained air from truck diesel fuel. Improve fuel economy, increase injector and fuel injection pump life, and increase engine torque output..
QUALITY -The products are made of high-quality materials and undergo strict quality inspection before leaving the factory. Make sure that every high-quality Lift Pump Filter is delivered to you with complete accessories..
PACKAGE - The packaging is as shown in the picture, we have carefully inspected it before delivery, and you can buy it with confidence..
COMPATIBLE - 100 GPH Lift Pump Filter Compatible with Chevy/GMC Duramax 2001-2010 6.6L Diesel Engines A4SPBC085.

Check Stock

AUTOOL Automotive Motorcycle 4 Cylinder Ultrasonic Wave Injector Cleaner Petrol Injection Tester Cleaning Kit Tester

【Why Need It】The performance of the injector plays a vital role in the power of each engine. Poor fuel will cause the injector to work poorly, causing serious carbon deposits in the cylinder, accelerating cylinder barrel and piston ring wear, unstable idling, increased fuel consumption, weak acceleration, difficulty in starting, and excessive emissions.
in severe cases, the injector will be completely blocked . Damage to the engine..
【Microcomputer Control】Fuel pressure control through microcomputer offers stable pressure control and large adjustable range, which is suitable for all EGI vehicles and can help to achieve automatic.
【Ultrasonic Cleaning】The injector cleaning machine adopts ultrasonic powerful cleaning technology, which has a strong cleaning ability and can completely remove the stubborn carbon deposits on the fuel injector..
【Wide Application】The fuel injector cleaner machine simulates various working conditions of the engine and can clean and inspect the fuel injectors of various motorcycles. Main functions: ultrasonic cleaning, uniformity detection, atomization observation, tightness test, fu....

Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

Injector Removal Tool Puller for Land Rover 5.0 3.0.
Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.

Check Stock

8 Cylinder Fuel Spider Injector With Bracket,Fuel Injector Kit Compatible with Chevy Pickup Truck 5.0L 5.7L V8 Replacement#FJ10566 FJ504 89060440 93441235 2173029

...burned hydrocarbon emissions.Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability.Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts..
【Time to Replace】 The spider injector is located under the car's intake manifold.The injector will not pump clean fuel if the filters are clogged with carbon or other impurities. You should replace the clogged spider injector as soon as possible to reduce pollution and increase the performance of your car..
【Notice】Contact us without hesitation, if you have any questions concerning accessories when you receive it.We does our utmost to provide the best possible solutions for your needs. Enjoy your worry-free shopping experience..

Check Stock

HiSport Fuel Injector Seal Kits Include O-rings, Pintle Caps, Seal Spacers and Filter Baskets Universal Repair Set Replaces 0280150962 [8 Set]

[COMPATIBILITY] This fuel injector rebuild installation kits combination is a universal kit, compatible with the most commonly used injectors 0280150943 0280150955 0280150962.Compatible with Ford V8 5.4L 4.6L Fuel Injector Service Repair Kit Seals Pintle Caps Filters..
[PACKAGE INCLUDES] This fuel injector repair kits include 8 micro filters 101, 16 injector O-ring 203, 8 injector retaining pintle caps 308, 8 injector spacers and 8 injector seal..
Micro Filters CF101-( 6X3X12mm), Injectors O ring 203 -(7.5X3.5mm), Injector retaining pintle Cap 308 - 12X8X6.5mm, Injector spacers seal 307 - (12.6*8.4*2mm), Injector seal 302 - (13X11X1.3mm).
[QUALITY CONTROL] This fuel injector repair installation kits set is 100% testing during the manufacturing process. o rings are made by FKM VITON material, it resistants high temperature which more than 200 degrees. All Items tested for reliability, durability..
[SATISFACTION] HiSport ensures brand new and high-quality products. In terms of any problem with this product, please contact us, our friendly assistants will always be available to help you within 24 hours..

Check Stock

Hemi: Scifi Alien Invasion Romance (Hell Squad Book 13)

XFI 2. 0 Plug and Play - FAST XFI Main and Injector Harnesses are designed to plug directly into the FAST XFI 2. 0 ECU. Each XFI 2. 0 system requires both a Main Harness and a separate Fuel Injector Harness to access basic XFI 2. 0 Fuel Injection functions..
OE Quality - Featuring quality wire, protective sleeving and brand-name connectors, FAST brand XFI harnesses bring OE quality into the performance aftermarket..
Modern HEMI - The XFI HEMI-specific fuel injector harness ensures a quick and easy XFI 2. 0 addition to your 5. 7/6. 1/6. 4L HEMI. Crafted to ensure quality connections and a tidy appearance, our HEMI injector harness is an easy, time-saving way to add XFI control to your next HEMI engine build or swap..
Tech Specs - The XFI Dodge 5. 7/6. 1/6. 4 fuel injector harness is constructed with USCAR/EV6 injector connectors, and the firing order is 1-8-4-3-6-5-7-2. Changing firing orders requires re-pinning injector harness..

Check Stock

YSTOOL Fuel Pressure Tester Gauge Kit 140PSI Automotive Engine Injector Pump Test Gasoline Gas Injection Manometer Tool Set with Inline Fitting Schrader Adapter for Auto Car Motorcycle (Blue Case)

The fuel injector tester kit is designed to identify and diagnose malfunctions in fuel supply & injection systems and help find possible causes. Suitable for most fuel injection systems in gasoline vehicles such as cars, trucks and ATVs. Incompatible with Bosch, CIS-Jetronic, or GM throttle body systems because of no suitable connection adapters. Also not fit diesel high pressure injection pump or high pressure fuel track on direct-injection engine due to the test range: 0-140psi /0-10 bar.
Gas fuel pressure tester gauge kit equips with various fittings and hoses for test, and supports two assembly forms. One is to connect pressure gauge directly to fuel pump's standard Schrader / M6 / M8 / M10 / M12 / M14 fuel pressure test port with 15" / 8" hose and M8 / M10 / M12 / M14 adapters. The other is to measure by fitting the T-type joint between the fuel pump and engine. Please note: no small Schrader connector in this fuel presure test kit to perform service for some Ford models..
Accurate fuel pressure gauge has a 3-1/2" big color-coded dial with shockproof rubber cover. 15"L hose can attach to the 1/4" SAE standard Schrader valve on fuel pump or fuel rail directly. The built-in translucent fuel discharge hose and pressure release valve work for safe pre....

Check Stock

New Injection Pump 6738-71-1520 4063844 Fit for Cummins 6BT5.9 Engine Zexel

Includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups.
With the head removed, the slide hammer adapter can be installed to pull the injector.
Brush set properly cleans the injector bore which is required for the fuel injector sleeve cup installer to properly seat the cup.
Applications include: 2006-2009 4. 5L Diesel, 2004-2010 6. 0L Diesel.

Check Stock