ReviewsFuel System Cleaner For Outboard Motors

Ironwood Pacific EasyTroller Trolling Plate - Standard with Fins for Motors 50 HP - 300 HP

SLOWS TROLLING SPEED - Slow your boat to as low as 1 MPH for the ideal trolling speed.
DAMAGE-RESISTANT DESIGN - The patented hinged plate design flexes upward to prevent damage to the plate under accidental acceleration.
EASY INSTALLATION - Mounts directly to the cavitation plate of your outboard or outdrive, a few inches behind the propeller.
TWO MODELS TO FIT YOUR MOTOR - The Standard Model fits outboard and stern drive motors of 50-300 horsepower, while the Short Model is for 30-45....
OPTIONAL FINS FOR GREATER PERFORMANCE - The optional hydrofoil trolling plate model combines two products into one to improve fuel economy and....

Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....

Check Stock

Pontoon [Explicit]

...,Starting System: Manual start,Control System: #93 gasoline.Recommended Propeller range: 3 -9"1/4''x8",Recommended Lubricant: 2 Stroke Lubricating oil,Mixing ratio: Fuel:oil=50:1,Trim and tilt system: Manual Tilt,Standard fuel tank capacity: 24L.
【12HP 2 Stroke Outboard Boat Motor】Using 2 Stroke Power, 12HP boat motor: Air Cooling Technology To Improve The Reliability Of The Whole Machine.Convenient Use,Easy Operation And Convenient Maintenance: Travel Safer,More Reliable,More Corrosion Resistant,More Beautiful,More Durable,More Energy Efficient,More Environmentally Friendly..
【Durable】Superior outboard anti corrosion system and anodes for increased durability. Durable cast aluminum construction for superior corrosion protection, suitable for both freshwater and saltwater..
【Water Cooling System】Superior engine water cooling system for improved engine performance. Easy pull off engine cover with push button latch for instant motor access. Standard CDI ignition system for easy starting and improved performance.Perfect match inflatable boats, fishing boats, sailboats, and small yachts.Performance More Su....

Check Stock

2 Stroke Outboard Boat Motors 18 HP Water-Cooled Outboard, 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Fishing Boat Outboard Boat Motors Kayak Engine CDI Air Cooling System

♛ 246CC Outboard Stroke Petrol Heavy Duty Boat Engine Motor Description -- Displacement: 246CC.
Recommended Lubricant: 2 Stroke Lubricating oil.
♛ Outboard Stroke Motor Boat Engine Works with little noise.Economical and compact structure. Durable, lightweight and and easy to carry,anti-corrosive construction. forward and neutral design.Maneuverable and safe twist grip throttle control.Packing size: 133x71x38.5cm.
Recommended Propeller range: 3 -9"1/4''x8".
♛ Outboard vertical mount engine design for increased power, performance and durability, superior CDI Ignition system for increased efficiency, twist grip throttle handle and engine stop button for improved response..
♛ 2 Stroke 18 HP Water-Cooled Outboard Suitable in freshwater or saltwater.Perfect math inflatable kayaks,fishing boats,sailboats,small y....

Check Stock

Makita EK7301X1 14' 73 cc Power Cutter with Diamond Blade

Improved decompression valve and metering spring for precise fuel regulation at start up..
Ignition coil with start-support function stores electrical energy with each pull for easier start ups.
On-Off-Choke operation switch on a single lever for operator convenience.
Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance.
Starter grip decompression valve for faster starting.
Carburetor engineered with improved deco-valve and metering spring for precise fuel regulation at start up.
Reinforced aluminum blade guard with 70 Degrees range of limitless positioning using a marked knob handle.
Cutting arm position simply changes from center position to flush outboard position allowing cuts directly adjacent to work.
New ignition coil with start-support function stores electrical energy with each pull for easier start ups.
Water kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank.

Check Stock

Moeller Water Separating Fuel Filter (Johnson/Evinrude)

Fuel filter for Johnson and Evinrude outboard motors.
Traps the smallest particles and emulsified water from gasoline.
Filter heads offer 3/8 NPT ports resulting in high performance for your engine.
Stainless steel, powder-coated, and plastic filter head with excellent salt-water corrosion resistance.
Filtration media will not separate two-cycle oil from gasoline.

Check Stock

MERCURY Element

Fuel filter for long-water Mercury/Universal/Yamaha outboard motors.
Traps the smallest particles and emulsified water from gasoline.
Filter heads offer 3/8 NPT ports resulting in high performance for your engine.
Stainless steel, powder-coated, and plastic filter head with excellent salt-water corrosion resistance.
Filtration media will not separate two-cycle oil from gasoline.

Check Stock

Upgraded Diesel Fuel Filter marine Water Separator Equivalent 1000 Series to 1000FH 180GPH ｜With Hand Twist Vavle｜Replacement For 2000-2001 Honda CR-V

...ron filter, protects your vehicle's fuel system from contaminants, such as: dirt, rust, and paint particles.
FITMENT: Filter for diesel engine. Don't be caught in the water without one of these diesel spin-on filters. Fuel Water Separator Filter fit 1/4 Inch NPT Outboard Motors, suited to compact off road diesel equipment: tractors, skid steers loaders, movers.
LONGER LIFE SPAN: The imported material from Italy has a filtration efficiency of 99%, 3 layers,results in higher dust holding capacity than ordinary 1-2 layers, and longer life span, it needs to be replaced only after driving for an average of for 20,000-40,000 miles. Fuel Filter Kit contains everything you need to replace a fuel filter on your vehicle.
REPLACE PART NUMBER: Replaces S3240 R12T 120AT, Replaces Sierra 18-7987.
CERTIFICATES AND WARRANTY: Germany TUV IATF16949, ISO14001, OHSAS18001.
USA Standard: Passed SAE1839 Standard Society of Automotive Enginess.
6 Months warranty. We will provide the best after-sales service. If you are not satisfied with the quality of our products ....

Check Stock

GAOLEI 323CC Outboard Motor Boat Engine, 4 Stroke 20 HP Heavy Duty Outboard Motor Marine Inflatable Fish Boat Engine with Water Cooling System CDI Ignition(Black)

[20 HP 4 Stroke Outboard Boat Motora]Air cooling technology To improve the reliability of the whole machine. Convenient use and easy operation, travel safer, more reliable, more corrosion resistant, more beautiful, more durable, more energy efficient, more environmentally friendly..
[High Performance Motor] Model: 4 Stroke 20 HP.
Displacement: 323CC, Gear Ratio: 2.08(27:13), Maximum Output Power: 14.7kw.
Bore and Stroke: 59x59mm, Start System: Manual Start, Fuel: #92 Lead free gasoline.
[Water Cooling CDI System]This outboard boat motor is equipped with its own engine water cooling system, allowing you to fish all day without overheating. Features 360 degree steering rotation for reverse without gear shifting. Twist grip throttle handle and engine stop button for improving response and saving time..
[Durability]Vertically installed engine design can improve power, performance, Superior outboard anti corrosion system and anodes for increased durability. Durable cast alum....

Check Stock

Upper & Lower Bearing Carrier Puller with Fuel Water Separator Wrench for Yamaha, for Johnson, for Evinrude, for Mercury, for Honda

...Upper Bearing Carrier Puller - Fit For Yamaha, Johnson, Evinrude, Suzuki, for Honda and Mercury upper bearing carrier (NOTE: with carrier style upper bearing housing)②Lower Bearing Carrier Puller - Fits For Yamaha, Johnson, Evinrude, Mercury (DOES NOT FIT VERADO), for Honda, Mercruiser.③Wrench - Fit For Yamaha Outboard Motors 2006 Serial Number 0406 To Current. Fits Yamaha 4-Strokes 150 to 350 HP, HDPI 2006+.
FUNCTION -- ①Puller works wonderfully for removing the bearing carrier oil seal and other tasks where a bearing puller is needed.②Wrench is specially designed to remove fuel water separator cup..
BENEFITS -- ①Save time and No more prying against seal surfaces. Removes toughest Lower bearing carriers effortlessly with no damage to the carriers.②Safely removes fuel water separator cup from filter assembly without damaging delicate plastic parts and avoids tangling in the water sensor wiring..
ADJUSTABLE -- Fits most gearcases 115hp and above. Adjustable arms allows it to be used on a variety of different sized outboard and outdrive / stern drive lower units..
SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.

Check Stock

BJTDLLX 2 Stroke 18HP Outboard Motor, 246CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System Boat Motor, Tiller Control Shaft 40CM/16inch, -Short Shaft

【2-stroke 18HP Outboard Engine】displacement: 246CC.
【Details】control system: #93 gasoline.
packaging size: 133x71x38.5cm/52.3"x27.9"x15".
recommended Propeller range: 3 -9"1/4"x8".
【Advantages】water cooling technology improves the reliability of the whole machine.
light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard e....

Check Stock