ReviewsFule Module

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

FINDAUTO 1331402 Replacement Engine Cooling Fan Control Module Fits 2011-2016 V-olvo S60 2007-2015 V-olvo S80 2008-2010 V-olvo V70 2010-2013 V-olvo XC60 2008-2013 V-olvo XC70

  • TOP QUALITY - All Cooling Fans Module are test-fitted onto the corresponding radiators prior to release to ensure precise, consistent fit..
  • EASY TO INSTALL - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Removing the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was removed..
  • FUNCTION - Engine Cooling Fan Control Module are critical to the function of most vehicles today, with several applications of these fans driven by an Engine Cooling Fan Module. These modules precisely operate fan speed to minimize a vehicleâ€s energy loss and maximize its fuel economy. Our OE Performance parts ensure an exact fit to drive your vehicleâ€s performance..
  • WHAT YOU WILL GET - 1PC high quality electric Cooling Fans Module as the Picture show..
  • NOTE - Before you make the order, Please make sure your car using this type S-tandard connector..
Check Stock

FOXWELL NT530 for BMW Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands – Free Online Updates. One year warranty..
Check Stock

FOXWELL NT530 for Volvo Multi-System OBD2 Diagnostic Scanner Read Erase Error Codes

  • Upgraded version of the NT520 PRO scanner with improved hardware. Compatible with both OBDI and OBDII vehicles.
  • Service Features: Battery Reset, Injector Coding, TPMS, SRS, EPB, Brake Deactivation, Service Reset, Steering Angle Sensor (SAS) Calibration, DPF Regeneration, ABS Bleeding, BCM/SIR Setup, TPS/TBA (Throttle Body Alignment), etc..
  • Multi-System Diagnosis: Engine, Automatic Transmission, ABS, Airbag, Immobilizer, Climate Control, Fuel Pump Control Module, Fuel Injection Control Module, All-Wheel Drive Control, VG transfer case Module, Electronic Selector Module, Body Control Module, Digital Radio, Standard Radio, Drivers Door Module, HVAC, Instrument Cluster, Seat Memory Module, Theft Deterrent, Amplifier, Central Gateway, Immobilizer, etc..
  • Advanced functions such as Actuation, Adaption and Programming.
  • Expandable up to 5 car brands - Free Online Updates. One year warranty..
Check Stock

High Intensity Propane Torch Head, Trigger Start Mapp Gas Torch with Self Ignition & Brass Knob, Pencil Flame Welding Torch Fuel by MAPP, MAP/PRO and Propane gas（CSA Certified )

  • 【Easy to Use】 Trigger Start auto Ignition for instant 1-click light up or extinguish the flame, improve fuel efficiency, easy to use..
  • 【Stable Performance】Flame control knob, adjust flame size. Flame lock, no need to press the trigger. Pressure regulation allow the flame to burn in any direction, ensure stable performance..
  • 【Premium Material】Cast aluminum body construction, solid brass valve and stainless steel burner tube, for withstand high temperature and long-term use. Safer and more durable..
  • 【Multipurpose Torch】Our torch fule by Propane, MAPP, MAP-PRO cylinder with CGA600 interface. Suitable for Soldering copper pipes up to 3/4″, used in HVAC, welding, brazing, soldering, heat shrinkage, snow melting, burning steak, etc.
Check Stock

cciyu Engine Cooling Fan Control Module Fit for 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice

  • ❥FIT VEHICLES - 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice 2007-2010 for Saturn Sky.
  • ❥FEATURES OF COOLING FAN CONTROL MODULE - When the vehicle speed of the vehicle is greater than 0 KPH and the power take off unit is engaged, the fan control module raises a setpoint of the engine coolant temperature to reduce the fan speed demand processed from the engine coolant temperature, the power take off status information, and the vehicle speed..
  • ❥EASY INSTALLATION - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Retaking off the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was toke off..
  • ❥PAKCAGE INCLUDING - We offer 1 piece of well performance Engine Cooling Fan Control Module and buy with confidence..
  • ❥NOTE - Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock

Tii 95s-1-12 Whole House Nid Dsl Filter Adsl Pots

  • Module’s unique design provides customer bridging and ADSL POTS splitting - all in one module..
  • Module easily snaps in and out of the customer side of the NID and occupies only one position, thereby not compromising the NIDÂ’s overall....
  • The Tii splitter design makes it possible to use a single phone line to provide triple play services including ADSL2+ and IPTV..
  • With module installed, an additional standard POTS line module is not needed..
  • Module includes Tii’s unique patented switchable RJ-11 Jack. The Auto-Jack does not require an RJ-11 plug for normal operation and delivers....
Check Stock

ICC/Intervox MEO-627PN-02-643, Condenser Microphone 6.0 X 2.7

  • DEPENDABLE TO USE: The Mic sensor sound module is professional manufacturing, voice detection module has high performance, strong reliability, making sure safety use..
  • MAIN FUNCTION: This microphone sound detection module can detect sound strength of the environment, with high accuracy, great for professional usage..
  • ANALOG OUTPUT: The microphone sensor sound module supports analog voltage signal output, the signal amplitude is VCC/2, stable to use..
  • ADJUSATBLE GAIN: The mic sensor voice module has high sensitivity, built in amplifier circuit, and the gain can be adjusted as needed..
  • AD COVERSION: The microphone voice detection module can obtain the voltage signal of sound intensity through AD conversion..
Check Stock

HiLetgo HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock

Bose Bass Module Connection Cable

  • Bose Bass Module Connection Cable for use with the Bose TV Speaker.
  • A 15′ (4. 6 m) cable with 3. 5 mm connectors for a wired connection from a Bose Bass Module to the Bose TV Speaker..
  • Expand your system with an optional bass module for a more heart-pounding, cinema-quality experience..
  • The Bose TV Speaker requires a wired connection and is compatible with the Bose Bass Module 500 or 700.
  • This an optional cable wire for expanding your Bose TV Speaker to connect to a Bose Bass Module.
Check Stock

HiLetgo 2pcs HC-05 Wireless Bluetooth RF Transceiver Master Slave Integrated Bluetooth Module 6 Pin Wireless Serial Port Communication BT Module for Arduino

  • The factory setting is slave mode, but you can set this module to master mode so that you might be able to connect to other Bluetooth 2.0 devices.HC-05 Wireless BT Module.
  • HC-05 Wireless BT Module: with this HC 05 Bluetooth module,You can quickly add the Bluetooth feature to your Arduino project, and then you can use your android phone to control some gadgets, such as: switch, LED..
  • Master and Slave 2-IN-1 HC 05 Module:Working Voltage 3.6V to 6V , Default baud rate:9600,Default pin:1234.
  • Button: Press the button, the module enter the AT mode. AT commands are executed only in AT mode..
  • 6 PIN Dopunt Cable : with this Dupont Cable, you can easily connect this HC-05 Bluetooth module to your Arduino Board.
Check Stock