ReviewsFull Suspension Lift

Supreme Suspensions – Front Leveling Kit for 2004-2022 Ford F150 2003-2017 Ford Expedition and 2005-2008 Lincoln Mark LT 2.5″ Front Lift Aircraft Billet Strut Spacers Kit 2WD 4WD (Silver)

  • COMPATIBLE WITH 2004 – 2022 Ford F-150 (2WD 4WD), 2003 – 2017 Ford Expedition (2WD 4WD) and 2005 – 2008 Lincoln Mark LT (2WD 4WD). *Does NOT Fit F-150 FX-4 and 2004 Heritage Models. | *NOTE for Expedition owners: This kit does NOT fit Platinum trim or Models equipped with CCD independent or auto-ride suspension..
  • TECHNICAL NOTES: 2.5 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that you measure your vehicle ride height before and after to see the full lift amount has been achieved..
  • BENEFITS: Improves the look of your truck and increases ground clearance, allowing you to fit larger custom rims and tires..
  • INSTALLATION: After an easy 1-2 hour installation process*, you’re ready to feature your new and improved ride! No special tools are required to mount these “bolt-on” spacers. *An alignment is always recommended if you are altering the height of your vehicle..
  • LIMITED LIFETIME WARRANTY: All Supreme Suspensions brand products have been thoroughly tested before market release and are backed by or Limited Lifetime Warranty..
  • PREMIUM MICROFIBER CLEANING TOWEL: Supreme Suspensions 16″ x 16″ Microfiber Towel with plush long fibers on one side to easily remove dust an....
Check Stock

maXpeedingrods 2.5" Lift Kit for Jeep Grand Cherokee WK2 2011-2022, for Dodge Durango 2011-2022 Front Rear Suspension Lift Kit

  • [Application] Lift kit fits for Dodge Durango 2011-2022 2WD/4WD, for Jeep Grand Cherokee WK2 2011-2022 2WD/4WD. Does not fit models with Air-Ride Suspension.
  • [Durable Material] Suspension lift kit is made of high-strength steel with good finish to resist rust and corrosion for an extended lifespan.
  • [Front & Rear Lift] 2.5” lift kit gives your vehicle higher ground clearance to fit larger tires and rims and accommodates tires up to 33".
  • [Trustworthy Replacement] Installation will take approximately 1-2 hours. No cutting, welding or other parts are required. No need to trim factory studs.
  • [Premium Service] We are committed to providing every customer with high-quality products. If you require any further information, feel free to contact us anytime.
Check Stock

10L0L Golf Cart 6 inch Heavy Duty A Arm Lift Kit for Club Car Precedent 2004-up Electric or Gas

  • 6" A-Arm spindle lift kit for Club Car Precedent 2004-up gas and electric, allows for up to a 23" tall tire.
  • Increase suspension travel providing a smoother off-road experience.
  • Includes front and rear lift, no cutting and no weld design, includes hardware and instructions.
  • Recommend professional installation, takes an estimated 1-3 hours to install.
  • Kit includes: 1 x main suspension assembly, 2 x spindles, 2 x a-arms, 2 x rear lift blocks, 2 x rear shock mounting plates, 2 x rear spring u-bolts.
Check Stock

EZGO TXT Golf Cart Lift Kit – For Gas and Electric TXT Freedom T48 and Valor (2001.5-2020) – 5 Inch Drop Axle Golf Cart Lift Kit Included Spindles - Wheel and Tires Combo Accessories for Golf Cars

  • ✅ HEAVY DUTY CONSTRUCTION - Our golf cart lift kit is made from thick steel designed to lengthen the wheelbase on your golf cart. Features a beautiful high gloss durable black powder coat finish. Heavy duty parts are made to withstand tough off-road use. Suspension lift kits increase the ride stability on all terrains Five inch lift allows clearance for up to 23" tall tires for the perfect ride height to accommodate golf cart wheel combo fitment..
  • ✅ NO DRILL INSTALLATION - No drilling cutting or welding is required to mount the lift kit to your golf car for an easy bolt on application. Our bolt-on design allows for simple assembly with only basic hand tools. Convenient pivot point grease fittings for easy maintenance. Includes everything to lift both the front and rear of your custom golf car..
  • ✅ FULL COLOR INSTRUCTIONS - The ProFormX golf cart lift kit comes with easy to follow full color instructions. The detailed step by step manual allows for a quick and simple mounting so anyone can accomplish installing their golf cart accessories for EZGO TXT..
Check Stock

Liftcraft - Fits 2006-2020 Dodge Ram 1500 Lift Leveling 3.5 Inch Front Kit | 6061T6 Aircraft Billet Strut Spacers (4WD)

  • FITMENT: For 2006 - 2020 Dodge Ram 1500 4WD Models | NOTE: Will not Fit TRX, Mega Cab, Ram Rebel or Warlock Models | Will Not Fit trucks equipped with Four-Corner Air Suspension.
  • MATERIAL: Premium 6061T6 aircraft aluminum spacers with ideal strength and weight.
  • INSTALLATION: Bolt-on kit, only takes a couple of hours to install.
  • CONTENTS: Aluminum Strut spacers (2), Hardware and Detailed Instructions - Liftcraft suspension lift and leveling kits are designed to offer a safe and easy way to improve the look of your truck and run larger-diameter wheels and tires without compromising your vehicle's ride quality..
Check Stock

ReadyLIFT 2007-2019 Compatible With Toyota TUNDRA 4.0'''Front with 2.0''Rear SST Lift Kit 69-5475

  • "unmatched curb-appeal delivered in an affordable yet innovative smart suspension technology "no-cut" lift kit".
  • maintains the factory ride, handling and suspension geometry.
  • the perfect mild lift solution for 2019 chevy silverado/gmc sierra 1500 trucks that provides a great looking aggressive stance with a slight rake.
  • "allows for up to a 35x11. 50" (295/65-20) tire on up to 9" wide wheel with 0 offset.".
Check Stock

RockTrix Front Leveling Kit - 2.5 inch Lift - Compatible with 2002-2014 Dodge Ram 1500 (2WD Only, Excludes Megacab) - Black Steel Coil Spring Spacers

  • [APPLICATIONS] ONLY fits two-wheel drive. Compatible with 2002-2014 Dodge Ram 1500 (2WD ONLY, Excludes Megacab)..
  • This leveling unit does not come with installation instructions but is completely bolt-on.
  • please consult a professional if you need support. Should take 2-4 hours to install and does not require any additional shock absorbers, cutting, welding, or other forms of modification..
  • Made from Heat Treated Carbon Steel, machined to exact specifications for optimal durability and fitment. Designed to be solid so that it does not bend or warp under stress and should last the lifetime of your vehicle..
  • Includes 2 lift spacers for a total lift height of 2.5″ (2.5 inch). Note that your suspension geometry is not a 1:1 ratio meaning the actual item thickness is not equal to the lift height..
  • After installation suspension will be slightly stiffer. In addition, an alignment after installation is necessary to get the correct lift..
Check Stock

WULF 3 Front 3 Rear Lift Kit with Shock Extenders and Rear Shocks compatible with 1999-2007 Chevy Silverado GMC Sierra 1500

  • Compatible with 1999-2006 Chevrolet Silverado GMC Sierra 1500 & 2007 Classic Body Style.
  • FRONT: 1-3" Adjustable Lift Steel Torsion Keys, (2) Powder Coated Shock Extenders for Optimal Ride Quality with High Grade Bolts, Hardware Included.
  • REAR: 3" Lift Fabricated Steel Powder Coated Angled Blocks, (4) Zinc Coated U-bolts, (2) WULF Stealth Nitro Gas Shock Absorbers, FREE Red Shock Dust....
  • NOTE: 4X4 4WD models only. TORSION BAR SUSPENSION MODELS ONLY Please see the description for full details, or contact us for assistance.
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.
Check Stock

TORCH 3 Front 3 Rear Lift Kit For 1992-1999 Chevy Tahoe Suburban GMC Yukon 1500 4X4 4WD

  • FITS: 1992-1999 Chevy Suburban 1500, GMC Yukon 1500, and 1995-1999 Chevy Tahoe 1500 4X4 4WD (Torsion Bar Suspension ONLY).
  • CONTENTS: Front Adjustable Lift Torsion Keys, Rear Tapered Lift Blocks, Extended U-Bolts and Hardware.
  • INSTALLATION: Bolt on kit. Comes with step by step instructions for the DIY backyard mechanic..
  • Ships Same/Next Business Day. 2-4 Day Delivery. Lifetime Warranty. Dedicated Customer Service. Call or message us with any questions!.
  • Note: Torsion Bar Suspension Models Only..
Check Stock

Malone EcoLight 2-Boat J-Rack Kayak Trailer Package

  • Marine-grade galvanized steel frame for years of dependable service.
  • Galvanized heavy-duty axle & leaf spring suspension deliver a smooth stable ride under full load.
  • Reinforced extra-long tongue with lift handle and tongue skid plate.
  • Coated steel load bars fit most manufacturer’s kayak carriers.
  • Powder-coated 5-lug high-speed wheels and injection-molded fenders.
Check Stock

Malone EcoLight 4-Boat Stacker Kayak Trailer Package

  • Marine-grade galvanized steel frame for years of dependable service.
  • Galvanized heavy-duty axle & leaf spring suspension deliver a smooth stable ride under full load.
  • Reinforced extra-long tongue with lift handle and tongue skid plate Coated steel load bars fit most manufacturerâ€s kayak carriers.
  • Coated steel load bars fit most manufacturerâ€s kayak carriers.
  • Powder-coated 5-lug high-speed wheels and injection-molded fenders.
Check Stock