ReviewsFully Threaded Anchors

(5 Sets) 3/8-16x3\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 3" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(5 Sets) 5/16-18x5\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 5/16" | Length: 5" | Thread Type: 18 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
  • Package includes four each of bolts, hex nuts , Flat & Lock washers.
Check Stock

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

Qty 25 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolts, Wall Anchor Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

uxcell 5Pcs M3 x 300mm Fully Threaded Rod 304 Stainless Steel Right Hand Threads

  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
  • Fully threaded rods are widely applied in many occasions.Note: the two ends of the stainless steel shaft are slightly deformed due to the cutting process and are not completely round. you can polish it before use..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
Check Stock

Qty 6 Anchors for Concrete, 1/4-20 Thread for Hurricane Shutter Bolts Anchors & Sidewalk Bolt

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

  • A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
  • As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
  • Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
  • Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
  • Package includes ten each of bolts, hex nuts , Flat & Lock washers.
Check Stock

uxcell M6 x 250mm Fully Threaded Rod, 304 Stainless Steel, Right Hand Threads

  • Fully threaded rods are widely applied in many occasions..
  • Used for assembly fastening, screw into threaded nuts or tapped holes..
  • 304 stainless steel, provides great corrosion resistance and antirust ability for a long service life..
Check Stock

YXQ 4Pcs M10 x 150mm Fully Threaded Rod Stud Right Hand Thread 304 Stainless Steel

  • Thread Size: M10 x 150mm / 0.4" x 6" (D*L).
  • Package Content: 4 x Fully Threaded Rods.
Check Stock

Xpircn 14G G23 Titanium Dermal Anchor Top Micro Dermal Piercing Jewelry Surface Piercing Body Jewelry

  • High Quality Material: made of G23 Titanium,super comfortable, durable , bio-compatible and best for sensitive skin..
  • Size: the crystal gem size is 3mm, 4mm, 5mm, 7mm. Please choose the best size for you..
  • Screw Type: Internally Threaded for 14 gauge(1.6mm) dermal anchors..
  • Nice Colors : Clear, Red, Purple, Rose, Aqua, Blue, Peridot, Crystal AB..
Check Stock