ReviewsFully Threaded J bolts

10Pcs M8 x 250mm 304 Stainless Steel Fully Threaded Rods, Threaded Rods Bar Studs, Right Hand Thread Long Threaded Screw, M8-1.25 Thread Pitch, Fits for Anchor Bolts, Hangers, U-Bolts (5/16\ x 10\)

  • 【Quality Material】These m8 threaded rod made of 304 stainless steel, which provides excellent corrosion resistance and anti-rust ability for long service life.
  • 【Package Content】You will get valued 10 pack of 8mm x 250mm threaded rods.
  • The fully threaded rods & studs can be drilled, cut, heated and shaped.
  • 【All Threaded Rods】Our stainless steel thread rod can be used for assembly fastening, screw into threaded nuts or tapped holes, cut to your desired length.
  • 【Wide Application】These 5/16 x 10 inches threaded rods are suitable for a wide variety of applications, such as anchor bolt, clamps, hangers, U-bolts, weld projections, even model building and more projects.
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • Measurement (Appr.): M8x1.25 304 Stainless Metric standard wingnuts. M8 stands for Metric thread inner diameter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and ....
Check Stock

J-B Weld 24236 Perma-Lock Medium Strength Threadlocker - Blue - 36 ml

  • PERMALOCK: Provides a superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening from shock and vibration.
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project.
  • EASY TO USE: Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools. Perfect for 1/4- 1" fasteners. Cap will not drip, spill or clog.
  • DEPENDABLE & VERSATILE: Perfect for use on rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and any other vibration sensitive item.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond.
Check Stock

3/4\ J-Bolt with Plate J Bolt Hinges for Large Heavy Driveway Gates, Steel, Iron, Wood or Aluminum Mounts on a 4\ X 4\ Post

  • Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated.
  • Hinge has a 3/8" X 11/2" welded plate with 2 holes to attach to an existing structure.
  • This hinge will swing a full 180 degree if installed without a stop.
  • The J-Bolt arm which attaches to the gate frame and is adjustible. Price is per Pair.
  • Threaded Bolt 7" Over all lenght,Sold in Pairs,Includes Grease fitting,Will fit on a 4" X 4" Post.
Check Stock

J-B Weld 27136 Perma-Lock High Strength Threadlocker - Red - 36 ml

  • RED HIGH STRENGTH: Provides a superior lock and seal for threaded fasteners. Ideal on mechanical parts, body assemblies, & heavy duty applications to prevent loosening from severe shock and vibration..
  • WHAT THE PROFESSIONALS USE: Builders, mechanics & repair pros know our products bond strong to a variety of surfaces in even the toughest environments. Choose the product pros trust for your project..
  • EASY TO USE: High Strength Threadlocker is ideal for heavy-duty applications requiring resistance to severe shock and vibrations. Heating and hand tools are required to separate parts..
  • DEPENDABLE & VERSATILE: Perfect for use on rocker arms, stud bolts, frame bolts, fasteners and bushings, loose screws and any other vibration sensitive item..
  • DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..
Check Stock

6 Pieces 8/32 Inch M4 12 Inch Threaded Rod with Hex Nuts Set Includes 6 Pcs M4 x 300 mm 304 Stainless Steel Fully Threads Studs Rods and 6 Pcs Thread Hex Nuts for Beaded Garden Stake Rods

  • What You Will Get: the package comes with 6 pieces of 8/32 inch M4 12 inch threaded rods and 6 pieces of M4 hex nuts, 12 pieces or 6 set in total, nice combinations for you to make 6 pieces of fairy garden stakes, as well as other DIY crafts.
  • Detailed Size: threaded studs: thread diameter is M4, and measures approx. 300 mm/ 12 inch in fully length.
  • Hex nut: the coarse thread diameter is M4, pitch: 0.7 mm/ 0.03 inches, flat across width: 7 mm/ 0.28 inch and about 2.8 mm/ 0.11 inch high.
  • Threaded Rods Studs: the threaded steel rod is made of quality 304 stainless steel material, sturdy, and resistant to rust or corrosion, with strong construction, hard to deform or break, which can be applied for a long time, and ideal accessories for assembly fastening, just screw into the threaded nut or threaded hole.
  • Hex Nut: the hex nut can be screwed to this threaded rod well, not easy to slip off, besides, it is also an ideal accessory for fasteners, it is also essential in daily life, just need to screw it to the thread metal rods, bolts and other tools of the same size are fine.
Check Stock

THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)

  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance..
  • The groove design prevents the battery from contacting the tray fasteners.
  • the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need..
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77.
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R.
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55.
Check Stock

Signature Fitness SF-3 1,500 Pound Capacity 3” x 3” Power Cage Squat Rack Includes J-Hooks and Safety Straps Other Optional Accessories Red

  • Dimensions: 83.46" Height, 51.18" Width, 38.78" Depth.
  • Fully adjustable J-Hook and Safety Strap position - 47 vertical holes and "westside" spacing on bottom half of each upright pole allowing for the....
  • Built with 3"x3" 11-gauge steel - maximum stability and durability, holds up to 1,500lbs.
  • Includes multi-grip pull up bar along with bolts and instructions to bolt rack into the ground or floor.
  • Includes UHMW-coated J-Hooks and safety straps - 200 dollar value, free.
  • many additional accessories available for purchase.
Check Stock

Tactical Bolt Knob for B-14 Rifles

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock

Hahiyo Screw in Nut Threaded Inserts M8 Bolt Fastener Connector Hex Socket Drive Keep Straight Turn in Cleanly Flush with Project Surface Easy to Install for Wood Furniture Zinc Alloy 18pcs

  • The threaded inserts can open and close a panel without damaging the wood.Go in cleanly.They won’t strip out of your projects.These go into hardwood also won't spend much time and the top has a flared edge to countersink flush with surface,good for parts that articulate closely with others.A solid way to affix the legs.They are easy to back out if necessary..
  • Easy to install:the threads on the inside and outside are both spot on.They will keep straight and the bolts turn in easily.You just need to drill a clean hole for the inserts,and then use an L bracket to attach these fasteners to lock down your project,you can wiggle the screw around in a small circle to position once it is fully in.They will fit in very snugly.Particularly convenient for handle..
  • Very sturdy:the threaded Inserts are solid,and threads are sturdy.They won't come loose or tear out.The threaded inserts to be more durable than brass ones when used in plywood.The bolts threaded will right into the wood well.Strong wood inserts and tight thread tolerance can make your projects long-lasting..
  • Versatile use:the threaded Inserts are playing a very important part role in many home projects.Suitable for repairing poorly-constructed cabinets,closet,knock-down furniture,woodworking projects,....
Check Stock

Tactical Precision Manufacturing Titanium Bolt Knob 5/16x24 - Dragon Scale - (Long) 1.90

  • Compatible with all bolt handles threaded in standard 5/16"-24.
  • Machined from 17-4 Stainless Steel and Heat Treated for optimal strength and durability..
  • Physical Vapor Deposition (PVD) Coating - a metal ceramic film that exhibits a high micro-hardness (1500-8000 HV), in excess of 80 HRc..
  • 100% Manufactured and PVD Coated in the United States of America..
  • Installs easily on 5/16"-24 pre-threaded bolt handles.
  • requires gunsmithing for non-threaded bolt handles..
Check Stock