ReviewsFurniture Caps Feet

16PCS Chair Leg Sliders for Carpet, Clear Square Chair Leg Rug Protectors Cap, Teflon Furniture Glides Chair Foot Covers Pads for Bar Stools Legs Dining Chair Ottoman Patio Furniture (Fit 0.75-1.1")

  • ...he chair glides for carpet are made of premium thermoplastic rubber material, which is durable and stretchable. No need to stick, simple to wrap, and not easy to fall off. Chair leg covers can be applied to round, square, and other irregular chair feet. Fit for leg diameter 0.75" to 1.1", Pls Measure your furniture leg size carefully before ordering..
  • 【PREVENT SCRATCHES & REDUCE NOISE & EASILY GLIDES】Our chair leg caps are upgraded and thickened, it has excellent high tensile strength, durability, aging resistance, bottom made of ultra-smooth Teflon material, reduces resistance Make everything slide and move so much easier. The pads for chairs to protect floor can protect furniture feet, and wooden floors from scratches, reduce noise, and prevent bumps. Makes your floors stay beautiful!.
  • 【EASY TO INSTALL】The chair leg covers for on a rug are easy to install, Can easily stretch to fit over furniture legs. just like wearing chair socks, Just slip them over your chair legs, and they’ll fit snuggly to stay in place! No tools are needed and no chair foot cleaning needed. If clear furniture cups are dirty, you can remove them and wash them and ....
Check Stock

GorillaRisers CB251-8 Screw on Furniture Risers (8 Pack) Floor Protector Slider Legs Raise Chair or Table Height 1-1/4” to 1-1/2\

  • ADDS 1-1/4 + INCHES HEIGHT TO FURNITURE – Gorilla riser legs are perfect for raising up low sitting furniture like dinning chairs, kitchen chairs, bar stools, tables, desks, armchairs, and any furniture that needs a lift (adds 1-1/2” with plastic glide installed and 1-1/2” with felt glide).
  • SAFE SLIDING ON ALL HARD SURFACES – These slider feet floor protectors for chairs and furniture provide smooth and quiet gliding on hardwood, laminate, vinyl plank, bamboo, vinyl tile, LVT, ceramic, LVP with Felt Glide insert and low pile carpet & rugs, tile and all other smooth hard surface floors with Plastic Glide insert.
  • FITS 1 INCH DIAMETER & UP FURNITURE LEGS – Designed for secure and easy screw on installation to furniture legs that are 1 inch wide at foot or larger making them the perfect solution for adding height to a chair, stool, table, desk or any furniture that is too low.
  • CARPET SLIDER & FELT GLIDE COMBO PACK – Pack includes 8 Gorilla Raisers that are 1 inch round (25mm) x 1.25” tall (32mm), 8 premium wool felt glide caps for sliding on hardwood floors, 8 plastic glide caps for sliding on carpet and hard surface floors, and 8 screws for secure installment under furniture.
  • HEAVY DUTY + 1 YEAR WARRANTY – Constructed for durability and depe....
Check Stock

16 Pcs Chair Leg Covers TOGAVE Silicone Furniture Protection Cover for Hardwood Floors Free Moving Protector Caps to Prevent Floor Scratches and Reduce Noise Translucence

  • 【Easy to Install】The silicone chair leg floor protector is easy to put on, no need to paste, no tools needed, and not easy to fall off.Because of....
  • 【Applicable Size Range】 Newly designed thicker silicone chair leg caps stretchable to fit chair foot with the perimeter of 3-3/4" to 6-5/16"....
  • 【Fit Various of Furniture Feet】The Elastic Silicone Furniture leg caps fit Round &Square and other shapes of furniture feet.It is also suitable....
  • 【Upgraded Durable Material】 Made of high-quality soft silicone, thickening, and wear-resisting, with a felt pad on the bottom of the cup. Protect....
  • 【Packaging and Service】 Including 16 pcs silicone chair leg protectors, a great product for daily life. If you have any question about the chair....
Check Stock

2 Inch Square Plastic Plug, End Caps for Tubing Pipe OD 2\ x 2\ (not ID), Steel Chair Leg End Caps, Bar Stool Glides Inserts, Fence Plugs, Furniture or Fitness Equipment End Caps (12 Packs)

  • [SIZE] - The Square Plastic Plugs fit 2" (two inch) OD square tubing (2x2) with INSIDE hole diameters (ID) from 1 3/4" to 1 15/16" ( 1.75" to 1.93") and wall thickness of 0.040" - 0.123" (10-20 Gauge).
  • [FUNCTIONS] - Reduce noise, prevents scratching of your floor surface and protects your expensive furniture when furniture is moved. These tube plugs are also nice dress up for the ends of the gorilla lift square tubes, fitness equipment end caps, fencing post end caps, furniture gliding caps, and prevent the rain to come in and rust out the pipes..
  • [APPLICATION] - These high-grade black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on patio chair end caps, bench feet, table legs, bar stool glides inserts, chair leg protectors, patio furniture inserts, bar stool glides inserts, chair end caps, chair leg inserts, pool fence plugs and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • [PREMIUM QUALITY] - Made by high Grade heavy duty black polyethylene, UV weather resistant and long lifetime. Features a series of tapered ribs which ensures a secure fit perfect for use on a wide range of metal furniture, appliances and similar items..
Check Stock

GorillaGlides 1 Inch Chair Sliders/Floor Protectors (16 Furniture Glides) Screw-On or Self-Adhesive, for Sliding on Carpet & Hard Surface Floors, Round, CB253-16

  • PREMIUM FLOOR PROTECTORS FOR CHAIR LEGS – Ideal slider feet for dining chairs, kitchen tables, stools, armchairs, coffee tables and furniture legs 1 to 1-1/2 inches in diameter at foot.
  • ULTRA-LOW FRICTION SLIDERS – Ultra low friction chair glides make sliding furniture effortless and provides smooth and quiet gliding on carpet and hard surface floors (Use GorillaFelt CB257-16 or CB2514 felt slider caps to protect hardwood, laminate, and vinyl floors).
  • PROTECTS FLOORS FROM FURNITURE FEET - Prevents furniture legs / bottoms from damaging floor surface and great for use on carpet, tile floors, rugs, slate, timber decking, ceramic, and more (Use GorillaFelt CB257-16 or GorillaFelt CB2514 felt cap inserts to protect vinyl, laminate and wood floors).
  • SCREW ON OR SELF-STICK ATTACHMENT – Includes 16 round 1-inch plastic sliders which feature strong adhesive backings for quick attachment as well as 16 screws for more permanent attachment under chair or furniture foot.
  • 5 YEAR WARRANTY – GorillaGlides CB253-16 by Slipstick are covered by a free replacement warranty should any product ....
Check Stock

1-1/2

  • ✅AFFORDABLE PACKAGE: This package includes 48 pieces patio furniture feet caps replacement.
  • ✅FIT MOST SIZE: Our patio furniture glide is approx 1.5 in diameter, 0.08″ in thickness and 0.5″ in height. It can be pressed into the cup-shaped area of the foot of the outdoor furniture with an inner diameter of 1.5 inches.
  • ✅UPGRADED PREMIUM MATERIAL: Made of durable UV resistant plastic, which can be used for many years.
  • ✅EASY TO INSTALL: Use a rubber hammer or mallet to install them easily. No adhesive needed.
  • ✅PROTECTION AND SCRATCH RESISTANCE: Prevent damage to the terrace surface by moving the lawn furniture smoothly. Say goodbye to nasty scratches on the terrace floor.
Check Stock

Chair Glides Sliders Chair Leg tip caps, Furnigear-Chair Leg Floor Protectors Best Furniture Sliders for Carpet, 1 inch Round, 24 Pack

  • MOVE YOUR FURNITURE EASILY: Our furniture sliders help you moving your furniture easily. Simply put them on your table chair feet, Furniture movers sliders easily glide on carpet hardwood, linoleum and ceramic tile surfaces..
  • Perfect for cleaning: Whether it's oil or dirt from everyday life, pet hair or blanket hair,it can handle easily. PTFE provides resists corrosion from cleaning products. Best furniture sliders for carpet and dining chair glides..
  • Reduce Scratching and Noise: Chair leg floor protectors help reduce noise of furniture movement. Heavy furniture sliders also help protect hard floor surfaces against scratches..
  • Upgrade chair glides sliders caps Simplified installation process, No need pre-drill and no stick-on, can be completely flipped. Our chair leg caps suit for indoor, patio, carpet, round chair legs. Fit for 1 inch, Qty:24pack..
  • WARM TIP: You’d better measure you chair leg before you order it. The best way to measure is Meter ruler, or vernier caliper. If you’re not sure how to choose the size, you can ask our customer services for help. Any question pls feel free to contact us..
Check Stock

GorillaGlides CB503 2 Inch Furniture Sliders / Screw On Glide Floor Protectors (Set of 4 Glides) for Carpet and Hard Surface Sliding, Round

  • PLASTIC FURNITURE FEET FLOOR PROTECTORS – Ideal slider feet for couch legs, sofa feet, tables, chairs, love seats and furniture legs 2 inches to 3-1/2 inches in diameter.
  • ULTRA-LOW FRICTION SLIDERS – Super slick bottom of glides makes moving furniture effortless and provides smooth and quiet sliding on carpet and hard surface floors (use GorillaFelt model CB270 for hardwood, vinyl, and laminate floors).
  • PROTECTS FLOORS FROM SLIDING FURNITURE - Prevents furniture legs / bottoms from damaging floor surface and great for use carpet floors, tile, slate, timber decking, ceramic, and more (use GorillaFelt to protect wood, laminate or vinyl floors).
  • SCREW ON OR SELF STICK ATTACHMENT – Includes 4 round 2” gliders which feature strong adhesive backings for quick attachment as well as screws for permanent attachment.
  • 5 YEAR WARRANTY – GorillaGlides by Slipstick are covered by a free replacement warranty should any product fail due to premature wear or defect - Slider caps can be replaced and are sold separately (see GorillaGlides model CB504).
Check Stock

24 PCS Extra Small Silicone Chair Leg Floor Protectors with Wrapped Felt, Chair Leg Caps, Chair Leg Cups Covers, Floor Protectors for Chair, Bar Stool Leg Protectors, Fit 0.5-0.8"(Round, Black)

  • ☛【Integrated Felt Pad】- Small Round Silicone Chair Leg Floor Protectors is upgraded and thickened bottom wrapped ( up to 0.4”/10mm ) . Felt furniture pads is made of premium Thermo-Plastic-Elastomer material, which is durable and stretchable. Floor protectors for chairs and felt pads are integrated as body so felt felt will never detach..
  • ☛【Upgraded Thickened Felt Bottom】- The 0.2 inches (5mm) thickened bottom and strong material make the wear and tear much more durable, lasting much longer. Everyday use and movement of furniture can be damaging your hard floor surfaces. These Bar stools Leg Protectors Caps of Ezprotekt Soft Thermo-Plastic-Elastomer cups protect your hardwood, ceramic tile and linoleum floors from marring and scuffs..
  • ☛【Universal Shape and Size】- IF YOUR CHAIR LEG SHAPE IS SQUARE, PLEASE CHOOSE SQUARE CHAIR LEG CAPS. IF YOUR CHAIR LEG SHAPE IS ROUND, PLEASE CHOOSE ROUND CHAIR LEG COVERS. Round Chair Leg Covers has High elasticity, free to pull. No deformation and no discolorratio. 4 size (S, M, L, XL) 2 shapes (Round and Square) and 2 colors (Clear, Black ) to choose..
Check Stock

Super Sliders 1 1/2\ Round Secure Grip Formed Felt Furniture Movers for Hard Surface Flooring, Brown, 20 Piece

  • CHAIR LEG FLOOR PROTECTOR GLIDES – Ideal slider feet for dinning chairs, kitchen tables, bar stools, armchairs, coffee tables and furniture feet 1" to 1-1/2 inches in diameter at foot.
  • ULTRA-LOW FRICTION SLIDERS – Super slick bottom of glides makes moving furniture effortless and provides smooth and quiet sliding on carpet and hard surface floors (Use GorillaFelt Model CB257 to protect hardwood, laminate, and vinyl floors).
  • PROTECTS FLOORS FROM FURNITURE SLIDING - Prevents furniture legs / feet from damaging floor surface and great for sliding on carpet, tile, slate, timber decking, ceramic, and more (use GorillaFelt to protect hardwood, laminate, and vinyl flooring).
  • SCREW ON OR SELF STICK ATTACHMENT – Includes 8 round 1” plastic gliders which feature strong adhesive backings for quick attachment as well as 8 screws for permanent attachment.
  • 5 YEAR WARRANTY – GorillaGlides by Slipstick are covered by a free replacement warranty should any product fail due to premature wear or defect - Slider caps can be replaced and are sold seperately (see GorillaGlides model CB254).
Check Stock

Round Plastic Plug, 1-1/4 Inch Tubing Post End Cap, Chair Glide Insert Finishing Plug, Great for Fencing Posts, Furniture End Caps, Fitness Equipment End Caps and More (12 Packs)

  • [SIZE]: - Fits 1 1/4" (one & a quarter inch OUTSIDE diameter) round tubing with INSIDE hole diameters (ID) from 1" to 1 3/16" (1.0" to 1.19") and wall thickness of .040 - .125" (10-20 gauge).
  • [FUNCTIONS]: - Reduce noise, prevents scratching of your floor surface and protects your expensive furniture when furniture is moved. These tube plugs are also nice dress up for the ends of the gorilla lift square tubes, fitness equipment end caps, fencing post end caps, furniture gliding caps, and prevent the rain to come in and rust out the spring..
  • [APPLICATION]: - These high-grade black ribbed plugs work great for preventing scuffs on wood floor or as protection glides on chair tips, bench feet, table legs, bar stool foot sliders, chair leg protectors, patio furniture inserts, and much more. They are also designed to hold up against impact abuse, and harsh weather conditions..
  • [PREMIUM QUALITY]: - Made by high Grade heavy duty black polyethylene, UV weather resistant and long lifetime. Features a series of tapered ribs which ensures a secure fit perfect for use on a wide range of metal furniture, appliances and similar items..
  • [SATISFACTION GUARANTEE]: - We stand by our quality commitment and will guarantee you 100% satisfaction of the fretboard protector. Pleas....
Check Stock