ReviewsFurniture Leg Screws

3 Inch Adjustable Metal Desk Table Furniture Legs Replacement Leg Legs for Coffee Table Desk etc Set of 4 Black

  • Size: about 50 x 80 x 50mm / 1.97 x 3 x 1.97 inches (diameter x width x height).
  • Installation instructions: Some threads of the table legs are not completely vertical. You need to tighten the screws firmly so that the mounting....
  • Material: These furniture feet are made of strong metal and very durable. One leg can hold up to 220 pounds, and the middle is hollow, which is too....
  • PACKAGE: 4 x Furniture Leg, 25 x Screws. If you find that the product is damaged or missing parts, please contact us for free replacement..
  • APPLICATION SCENARIO: Great for Sofa, Couch, Chair, Ottoman, Furniture, Cabinet, Shelves. Easy to install..
Check Stock

Slipstick 2 Inch Non Slip Furniture Legs (8 Pack) Screw in Floor Protector Feet (2\ Tall x 2\ Wide) Black Plastic with Rubber Gripper Feet

  • 2" x 2" SCREW ON FURNITURE LEGS – Great as add on or replacement feet for a couch, sofa, table, sectional, tv stand, desk, armchair, dresser, cabinet, or any furniture piece (for 1 inch diameter legs see GorillaRiser CB251-8).
  • FLOOR PROTECTING NON SLIP GRIP – each 2” tall foot features a soft rubber gripper that stops furniture sliding and protects hardwood, tile, lvt, carpet, and all floor surfaces.
  • INCLUDES 8 SLIPSTICK CB512 GRIPPER FEET AND 8 SCREWS – Each leg is 2 inches tall and 2 inches round (50mm x 50mm) and can be screwed directly into furniture (no mounting plate required - simply screw a pilot hole and screw in with included screws)..
  • ADDS 2 INCHES HEIGHT TO FURNITURE – Great as screw in risers for low sitting furniture and improves ergonomics by easing standing up out of low sitting chairs, couches, and seats (each leg supports up to 220 pounds - set of 4 legs will support up to 880 pounds).
  • For use on furniture legs, feet or bases that are at least 2 inches in diameter or larger (not recommended for use on legs that are under 2 inches wide).
Check Stock

(SINGLE LEG) (2\ Wide - 1/4\ Thick Metal) Square Metal Legs, Table Legs, Bench Legs, Legs, Industrial Modern, DIY

  • SIZE: Height: 10 inches/25.4cm (with mounting plate), screw mechanism on the bottom can adjust about 0.7 inch/1.8cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 0.81LB/0.37KG (One Leg)..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Furniture Leg, 32 x Long Screws, 4 x Short Screws, 4 x Washers, 4 x Mounting Plates. If you find that the product is damaged or missing parts, please contact us for free replacement..
  • APPLICATION SCENARIO: Great for Sofa, Couch, Chair, Ottoman, Furniture, Cabinet, Shelves. Easy to install..
  • GUARANTEE: We promise to provide you with good quality products and services to make sure your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. We guarantee delivery within 1 to 3 business days for Prime members and 1 to 5 business days for non-prime members..
Check Stock

QLLY 28 inch Adjustable Metal Furniture Legs, Square Office Table Furniture Leg, Set of 4 (Black)

  • SIZE: Height: 28 inches/72cm (with mounting plate), screw mechanism on the bottom can adjust about 0.7 inch/1.8cm, mounting plate is about 0.4 inch/1cm height. Diameter: 2 inches/5cm. Weight: 2.42LB/1.1KG (One Leg)..
  • MATERIAL: These Furniture legs are made of Strong Metal, they are Heavy Duty. One single Leg holds up to 220 lbs. Its Surface is treated by electrostatical spray and is odorless and eco-friendly..
  • PACKAGE: 4 x Furniture Leg, 32 x Long Screws, 4 x Short Screws, 4 x Washers, 4 x Mounting Plates. Please use the washers together with the screws, which can make the table legs more tightly connected with the mounting plate. If you find that the product is damaged or missing parts, please contact us for free replacement..
  • APPLICATION SCENARIO: Great for tables, desks, counter tops, kitchen tables. Easy to install..
  • GUARANTEE: We promise to provide you with good quality products and services to make sure your satisfaction. If you are not satisfied with our products, 100% guaranteed return of goods. If you find that the product is damaged or missing parts, please contact us for....
Check Stock

Btibpse Mounting Plates for Wood Furniture Legs Sofa Legs Attachment Plates with Hanger Bolts Screws Set of 4 (Black)

  • The strong metal mounting plates are made of premium metal, can hold up the furniture well, and extend the life of your bench, couch, dresser, end table, and ottoman..
  • 4 pieces of 5/ 16 inch (M8) hanger bolts,4 pieces mat..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place.
  • Furniture repairing replacement: this furniture leg mounting plate can attach legs to new or damaged sofas, couches, seats, ottomans, etc..
  • Easy to install and time saving, no need to buy hanger bolts and screws..
Check Stock

Dunzy 20 Pcs Threaded Adjustable Furniture Levelers Screw Foot Stainless Steel Furniture Leveling Feet Screw On Furniture Glide Leveling for Chair, Table, Patio Furniture Legs

  • Package Content: our patio furniture screw in foot levelers set contains 20 pieces of M8 stainless steel furniture leveling feet with semicircular, stainless steel screws on the bottom.
  • This set can meet most of your home decoration needs.
  • Suitable Size: these M8 chair screw feet are approximately 7/16 inch in length.
  • The nylon base is approximately 7/8 inch in diameter.
  • They are suitable for furniture with M8 metric screw size, please check the size before purchasing.
  • Nice Material: the base of these furniture levelers is made of good ABS plastic, and the screws are made of stainless steel, which are strong and sturdy and not easy to break or wear.
  • Our products can serve you for a long time.
  • Multiple Functions: these adjustable leg leveling glides are not only suitable for adjusting the height of furniture, but also for avoiding scratches on furniture or floors.
  • In addition, they can also reduce the noise of moving furniture to a certain extent.
  • Wide Application: these outdoor chair leg protectors are suitable for all kinds of furniture, such as tables, chairs, desks, cabinets, TV....
Check Stock

Swpeet 80Pcs Black 22mm & 30mm Square Shape Furniture Pads with Screws, Heavy Duty Rubber Non Slip Non Skid Furniture Feet for Table Desk Chair and Sofa Leg Furniture Cups to Protect

  • ♛ WIDE APPLICATIONS ----- These Black Square Furniture Pads Can be used for dressing table, table, cabinet, chair, sofa, sofa, table leg tip, cutting board, walking stick, living room furniture, bedroom furniture, kitchen and dining room furniture, as well as more family furniture, terrace furniture, outdoor furniture legs..
  • ♛ EXCELLENT FLOOR PROTECTION ----- With metal Washers, screw installation force is better. The screws are stainless steel and recede deeply into the pads so they are nowhere near the flooring. The pads have a washer ""baked"" into them to keep the screws from pulling through..
  • ♛ HIGH QUALITY MATERIAL ----- These Black Square Furniture Pads are Durable and soft natural rubber, easy to install, using high-quality transparent odorless rubber material. Rubber pads have reinforcements around the screws to prevent them from breaking. They seem to be made of a durable material and have a very good grip..
  • ♛ EASY TO INSTALL ----- Easy to install, just put it under the legs or feet of tables, chairs, stools, shower chairs, etc. The wooden floor protection device is nailed to protect the hardwood, tile and linoleum, floor and surface from damage and scratch..
  • ♛ WHAT YOU GET ----- In this kit, You will get 80Pcs Black 2 Sizes Squa....
Check Stock

Table Legs,Autuwintor Replacement Sofa Legs 5 Inch Lucite Furniture Legs with Gold End with 5/16\ Pre-Installed Hanger Bolt&t-Nut Sofa Acrylic Legs,Legs for Furniture Gourd Sofa Table Legs Quantity-4

  • FURNITURE LEGS 4 INCHES - Perfect Height for Replacement Furniture Legs. Replace All Kind Of Couch Legs 4 Inch , Sofa Feet , Dresser Legs , Chair Risers 4 Inch ..
  • 2 DRILLS BITS - Furniture Feet Set Comes With 2 Drills Bits (12mm, 3mm) Which Saves Time And Money And Makes Replacement Furniture Legs Easy And Fast. 12mm Drill Helps You To Make Exact Hole For Wood Legs And 3mm Is Perfect For Screws..
  • UNIVERSAL FIT - Our Wood Furniture Legs Are Universal Fit And Can Be Used On Any Find Of Furniture Such As Couch Feet, Sofa Legs 4 Inch Dresser Legs, Cabinet Feet, Table Leg Extenders, Chair Leg ..
  • HIGH QUALITY - Wooden Legs For Furniture Are Made Of Solid Rubber-wood, With High Quality Brown Color Finished. Wooden Leg Makes Your Furniture Look More Styles. Patas de repuesto para muebles..
  • MONEY SAVER - Furniture Feet Wood Set Is Big Money Saver As It Comes With All The Things You Need To Replacement Legs For Couch Or Your Furniture Leg 4 Wooden Legs , M8 Screw And Cap, 4 Felt Pads, 4 Metal Pads, 2 Drills Bits (12mm, 3mm)..
Check Stock

Adjustable Leveling Feet Furniture Levelers Table Feet Heavy Duty Leg Levelers for Cabinets Sofa Tables Chairs,Support 1320LBs, T-Nut Kit 3/8”-16 Thread, Large Base- 4 Pack, Black

  • ✔Heavy Duty & Large Furniture Leg Levelers- Allow easy leveling of furniture at home, office, restaurant, school or café, to match in same height. They allow raising your furniture, and help slide your furniture at ease !.
  • ✔Adjustable Leveling Feet - 1.75” long steel insert with 3/8-16” thread.
  • Large Commercial Quality 1 3/8" Diameter 1/2” Thick Base and Fully Adjustable Height from 3/4” to 1 3/4” for Maximum Support and Adjustability..
  • ✔1320LBs Max Support- Commercial quality furniture levelers, T-nuts and thread insert are made of steel that support over 330LBs per feet, a set of four support furniture weight 1320LBs!.
  • ✔For All Floors- Universal Nylon bottom that work for all floors such as hardwood/ tile/ carpeting floors. Comes with separate high density thick felt for hardwood floor to protect floor from scratches or harsh noises..
  • ✔Easy Installation- For furniture legs with existing 3/8"-16 thread, simply screw in the leg leveler to adjust the height. Or, pre-drill a 1/2” hole and insert the Locknut with mounting screws ,stabilize the leveler and adjust to the desired height. T-nuts and installation screws are included..
Check Stock

T Tulead Triangle Cabinet Feet 4.5-Inch Height Heavy Duty Metal Furniture Legs Golden Sofa Feet Modern Style Table Legs with Mounting Screws, Set of 4

  • PREMIUM MATERIALS - Constructed from high hardness iron with strong bearing capacity, durable and stand firm, approx. 200 per furniture leg. Each legs have rubber bottom to protect it from scratching the floor raise the height of your sofa or change the style by replacing the legs.
  • PACKAGE CONTENT - 4 Pcs x Furniture feets +20 Pcs x Mounting Screws. Total Height: 4"/ 10cm.
  • Come with pre-drilled holes and mounting screws, so installation is quick for all skill levels patas para muebles.
  • MID-CENTURY STYLISH - These classic stylish legs will give your house the unique charm with the mid-century design, add beauty to your furniture and bring a new look for your sofa.
  • WIDELY APPLICATION - Accessories for DIY furniture, cabinets, shelves, sofa, bed, ottoman, couch, chair, dresser legs,table ect.
Check Stock

Solid Wood Furniture Legs, Sofa Legs Set of 4 for Furniture, 5-Inch Couch Legs, Square Mid Century Desk Legs, Replacement Legs for Couch Dresser Sideboard Recliner Circle Chair

  • ►Full Set 3” Furniture Legs -- 4*(M8) SQUARE Furniture Legs+ 4*Anti-Scratch Floor Protection Pads+ 4* (M8) Leg Mounting Plates+16* Screws. With this set of furniture legs, you will have EVERYTHING ready to install/ replace furniture legs like sofa, couch, ottoman bench, coffee table, bed,loveseat, cabinets and more!.
  • ►Mid- Century Modern Style- Coated with walnut varnish to look vintage and always fashion. Walnut sofa legs easy matching with your floor in all colors. The replacement furniture legs are expertly crafted and constructed with highest quality oak hardwood to ensure sturdy and long service life..
  • ►Specifications- Wood Leg Height(Not includes the Screw): 3”.
  • ►Floor Protection Pads- Comes with 4pcs of sturdy felt floor protectors to ensure your hardwood floors stay in pristine condition without scratching and prolong the life of the wood legs..
  • ►Easy to Install- All accessories are supplied for installation. Pre-drilled with M8 mounting plates to install the furniture legs..
Check Stock