ReviewsFurniture U nuts

3230BC 3/4\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

3230BC 5/8\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

3230BC 3/8\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

Prime-Line 9071931 U-Bolts, Round Bend, 1/4 inch-20 X 1-1/8 inch X 2-1/4 inch - (3/4 inch Pipe), Zinc Plated Steel, (10-pack)

  • STOP: ONLY USE a Hand Socket Ratchet or wrench to run the nuts up and tighten..
  • DO NOT USE an impact or powered socket driver. Ignoring this instruction will cause U-Bolt Galling / Seizing / Breaking / Failure / Expletives / Sawzall. Let's keep it Fun, and Successful..
  • U-Bolt Size: 1/2" Diam x 3- 1/16" Inside Width x 5- 5/16" Inside Height (Length).
  • Attention: When measuring for Your needed Height (Length), add 1" for the nut and washer..
  • Threading: 1/2"-13 with a thread length of 2- 1/2"..
  • U-Bolts and hardware are made out of 304 Stainless Steel..
  • These U-Bolts will fit on 3" x 3" cross members, such as 3" x 3" box steel..
Check Stock

uxcell Round U-Bolts 4 Sets 0.63 16mm Inner Width 46mm Length Steel M6 with Nut Plate Washer

  • Hex Nut Size: 10 x 5mm / 0.39" x 0.2"(Hex Width*H).
  • Frame Plate Size: 50 x 18 x 2mm/ 1.97" x 0.71" x 0.08"(L*W*T).
  • Round Washers Size: 18 x 6 x 1mm / 0.71" x 0.24" x 0.04"(OD*ID*T).
  • Package Content: 4 x U-Bolt, 8 x Nuts, 8 x Round Washers, 4 x Plates.
  • Material: Steel construct u bolt, galvanized surface treatment, bending forming processing technology with great performance in antirust and corrosion resistance, high hardness and good tensile strength..
  • Application: U-bolt is used to fasten or attach locking components to pipes, wood, etc. Just insert and tighten the nuts at both ends. It is suitable for the connection of boats, pipelines, trailers, and industrial steel structure conduits..
Check Stock

Hankun Furniture Levelers- Adjustable Heavy Duty Leveling Legs, Protect Cabinets Sofa Tables Chairs Raise Feet Supprort, Black T- Nut Kit, 8 Pcs

  • Excellent quality: Set of 4-1-1/2" leveling feet heavy duty with T-nuts 5/16-18 thread. Allows you to easily move your furniture.
  • Universal design: Our adjustable furniture leveler can be placed on tables, chairs, cabinets, and shelves. Whether it is indoors, terraces, gardens, as long as your furniture needs help to level it, our adjustable furniture leg straighteners can quickly solve it, while keeping it stable and not affecting the appearance.
  • Easy to install: Use a 3/8 or 7/16" drill bit to drill a hole 30.48 mm/1.2 inch deep, use a hammer to tap the plug-in T-nut and screw the straightener to the correct position. The heavy duty leveling feet includes a lock nut to lock and stabilize the straightener.
  • Flexible adjustment: Easily level your chair and table. Easy to use on new furniture, very suitable as a replacement part for old furniture.
  • Suitable for all floors: Universal bottom suitable for all floors, such as hardwood/tile/carpet floors. Protect the floor from scratches or harsh noises.
Check Stock

VIGRUE 180PCS M6 x 20/30/40/50/60/70/80mm Bolts Nuts Kit Furniture Bolt Crib Screws Kit Hex Socket Head Cap Screws Nuts Barrel Bolt Nuts for Crib Bunk Bed Cot

  • M6 Furniture Bolt Nuts KitThis set includes 66pcs M6 bolts ( 7 sizes), and 120pcs M6 nuts (30pcs inserts nut, 60pcs barrel nuts, 30pcs flange nuts).
  • MultipurposeThe hardware replacement kit fit for different kinds of furniture such as cribs, bunk beds, cabinets, table, chairs, cots. It is also ideal for joining wood, boards, kitchen worktops, workbench, headboards, cupboards, other furniture..
  • Sturdy and Durable Materialthis crib screws kit is made of high speed zinc plated metal with the performance of wear-resistance, high hardness and good toughness. Zinc plated surface prevents it from rustiness, corrosion and oxidation..
  • Easy to Storethe bolts and nuts come in a portable transparent box with corresponding label. It is convenient for you to put away and store, which allow you to get the one you need quickly, improving your project efficiently..
  • Fine WorkmanshipVIGRUE hex socket head cap screws nuts threads m6 kit accord with standardized metric system, which are not easy to deform and slide in your diy project. The matching hexagonal drive is convenient for your progress..
Check Stock

Binding Screw, PK5

  • Product Type: High Quality Stainless Steel Furniture Bolts Nuts Set..
  • Outer Diameter: 8.0mm, fit for 5/16" (8mm) Hole Dia..
  • Package Included: 10 Pairs (10 PCS Furniture Bolts and 10 PCS Barrel Nuts)..
  • Ideal Application for all kinds of DIY art, leather crafts, and clothing making..
Check Stock

4 Inch Wood Furniture Leg Square Tapered Black Finish (Set of 4)

  • ...Y HARDWOOD】Sturdy legs made from 100% oak hardwood in walnut finish with plastic nail glide to protect the floor. We strictly control the material selection, drying and splicing of products. The complete set of products after correct installation can bear 800 lbs..
  • 【RAISE HEIGHT】Increase the height of the furniture, And the sweeping robot is easy to pass, easy to clean the place under the furniture. The legs work on cabinet, dresser, bed, sideboard, coffee table and etc..
  • 【PERFECT SIZE】Top size: 3-3/4" x 3-3/4"(9.52x9.52cm), Bottom size: 2-1/2" x 2-1/2"(6.35X6.35cm), Height for wood part:4"(10.16cm). Each leg is attached with M8 Metric hanger bolts, accessories are supplied, including 4x T-nuts, 16x screws, 4x Plastic nail glide..
  • TIPS - To install these furniture legs, the base of the furniture need to be drilled. If the existing hardware nut is for M8 x 1.25 hanger bolt (such IKEA Furnitures), then just screw in the new legs. Otherwise the existing old hardware has to be removed, use the insert T-nuts and screws to install the legs..
  • 【BEAUTIFUL LOOK】The mid- century modern style furniture legs are fashion, classical and durable. Each piece is well finished with the color of walnut painting. Perfect for upholstered furniture. Replace ....
Check Stock

SZHKM Bolts Nuts Kit Hex Socket Head Cap Screws Nuts Zinc Plated M6 Crib Screws Furniture Barrel Screws Bolts Assortment Kit for Furniture Cots Beds Crib and Chairs 150PCS with Tools for Free

  • ????【Quantity】SZHKM bolt and nut kit 150 pieces, M6 30-80mm, five models. The product includes nuts for three different purposes (attach free tools), all the bolts and nuts are put in a plastic box, and the corresponding label, easy to take and put, let you improve work efficiency..
  • ????【Widely used】SZHKM furniture barrel screws nuts are very suitable for professionals, amateurs, landlords, workers, repairmen, carpenters, construction workers. The kit can be widely used in various hand DIY, various furniture, such as crib, double bed, cabinet, chair, small bed, desk, carpentry manufacturing, etc. SZHKM hexagonal screw nut is an ideal tool for home and workplace..
  • ????【Materials】 Furniture barrel screws bolts nuts are made of high-grade zinc plated carbon steel, with high hardness, anti-oxidation, durability, surface galvanized, making inner hexagon screw stronger, rust-proof, anti-corrosion and wear-resistant..
  • ????【Exquisite workmanship】Our hex socket head cap screws nuts threads are very smooth, sharp and accurate. It is not easy to deform and slide in the working process. The use of hexagonal sleeve drive will make it easier for you to use. Our screws and nuts meet the standard metric system..
  • ????【Environmental protection materi....
Check Stock

Heavy Duty Furniture Levelers 3/8''-16 Thread w/ T-Nut Kit Furniture Leveling Feet Adjustable Furniture Levelers for Tables,Cabinets,Chairs,Workbench,Sofa and More,Large Base Supports 1320LBs-4 Packs

  • [Support Heavy Furniture] This commercial quality heavy duty furniture leveler comes with strong steel T-nut to lock and stablize the straightener, each can support max 330LBs,a set of four supports furniture weight 1320LBs! Fits for heavy furniture such as cabinets,tables,beds,workbench,sofa,chairs and more..
  • [Adjustable Leveling Feet] The shaft of this furniture leg is 1.77 inch long with 3/8” thread which is universally used in American Made Furniture. With a 1-3/8” diameter and 1/2”thick metal base, it can support fully adjustable height from 3/4” to 1-3/4” for maximum support and adjustability according to your needs..
  • [Protect Your Floors] Beside stop shaking and reduce vibration on uneaven floors, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, protecting the floor, tile or carpet from damage or scratches.No noise will be heard while moving or sliding the furniture..
  • [Easy To Install] Pre-drill a hole with a diameter of 0.5 inch on the furniture leg,then insert the T-nut(tightened with a hammer)with mounting screws, screw in the leg levelers to your desired position to complete the adjustment.If it is a metal leg, you need to weld ....
Check Stock