ReviewsFuse Extension Wire

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

  • Material:copper+rubber, Fuse holder dimension:38x25x13mm.
  • In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
  • 14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
  • Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.
Check Stock

2pcs 1M/3.3Ft 20AWG USB 2.0 Male Plug 2pin White Wire DIY Pigtail Cable USB Power Cable

  • ✪ USB Male to 2 Pin 2 wire Power Cables with On / Off Push Button for DIY.Can be used in any devices with 5V USB. Such as Driving Recorder Power Cable, LED Desk Lamp, USB Fan, Bedside Lamp and other computer peripheral low-power electrical devices..
  • ✪ Cable Gauge: 24AWG, Total Length: 100 cm, Support 5V, Max 2A,solving the problems of long range cable controlling.This Cable/Cord is only for power supply and connector, NOT for Data Sync..
  • ✪ Usage:USb Extension Cable With ON OFF Switch.It's not a simply USB Extension Cable, but with switch for ON/OFF.Just press the button to turn on or off..
  • ✪ Easy to Solder:The ends of the DC5521 pigtail cables are pre-tinned which makes them very easy to solder.At the end of the bare wire open end pigtail have a slot for securing,You can screw wires onto car battery box or fuse box power easily.Not easy to loose..
  • ✪ Pay Attention: 1. It can NOT support high-power electrical devices, such as usb external SSD. 2. If connected USB 3.0 or High version USB Cable, it can still be USB 2.0 Speed..
Check Stock

10ga Fuse Holder 2 Pack MUYI Inline Fuse Holder 10 Gauge Fuse Holders 12v Waterproof Pigtail Blade Fuse Relay with 40AMP ATC Fuses

  • 10 AWG thick red pigtail wire allow you to splice it into any project..
  • Wire length: 6 inches 10 gauge wire each side, Fuse holder dimension: 41x35x15mm.
  • Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. NOT easy to fall off or let water in..
  • Inline Fuse Holder for standard blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A,30A,40A, ideal for car truck trailer atv boat marine.
  • Package Included: 2 X Standard Blade Fuse Holder and 2 X 40Amp Standard Blade Fuse.
Check Stock

CELLPOWER CPUSB01 12V to 5V MiniUSB Power Adapter with BDP (Battery Discharge Prevention) Low Voltage Cut-Off for Street Guardian SG9665GC (and Other Mini-USB Powered) DashCam Products

  • CELLPOWER CPUSB01 12V to 5V MiniUSB Power Adapter with BDP (Battery Discharge Prevention) Low Voltage Cut-Off for Street Guardian SG9665GC (and other mini-USB powered) DashCam products.
  • Please search for SGDCHW for use with SG9663DC. Hard wire power directly to your DashCam (miniUSB powered) 12-24 Volt Compatible..
  • You can wire the CELLPOWER CPUSB01 miniUSB BDP hard wire kit to a “Switched” Accessory fuse power circuit and it will turn on/off with the car engine. Tip: Be sure to actually start the engine when testing Switched ACC power, turning the key one notch to ACC without starting the engine is too low on some cars.
  • You can technically wire it to “Non-Switched” Battery fuse power circuit, but we recommend the Vico-Power Plus or MotoPark Fine Safer for parking mode operations.
  • Total Length = 13 feet / (4 meters) miniUSB side = 8 feet / (2.5 meters) fuse panel side wire = 5ft (1.5 meters) Red/Black wires are 16 AWG *Note, Add-a-fuse pigtail not included (5A fuse is ok).
Check Stock

CANRIA - 2PCS 60 Inch COB-8MM 1584 LEDs Bed Strip Kit with Waterproof on/Off Switch Blade Fuse 2-Way Splitter Extension Cable for Cargo, Pickup Truck, SUV, RV, Boat, etc. White, 6500K

  • COB-8MM 1584 LEDs bed strip kit with waterproof on/Off switch blade fuse 2-way splitter extension cable for cargo, pickup truck, SUV, RV, boat, etc..
  • Including 2 PCS, 60 inches / PCS. Input Voltage: DC12V.
  • Clean the surface thoroughly and make sure no dirt or dust , or it will reduce the strength of the adhesive tape. Peel off the protective film from the back of LED light strip, apply the light strip and press it firmly on the truck bed rails or wheel wells 30 seconds..
  • Including several stainless steel screws, plastic wires clamp clips, R-type cable clamp fastener, self-locking nylon cable ties, which can be reinforced as needed..
  • Connect to power source: connect the red and yellow wire in the extension wire bundle to power source, red to positive, yellow to negative..
Check Stock

10 3 Contractor Grade 50 ft 10 Gauge Power Extension Cord 10/3 Plug Extension Cord with Lighted Ends 10 Gauge Extension Cord 50 ft Outdoor Heavy Duty 10/3 Extension Cord 50 ft, Green

  • 10 Gauge SJTW 3 Conductor 50 Foot Extension Cord With Lighted Ends - green-extension wire outdoor extension wire 50 feet extension cord outdoor 10/3.
  • heavy duty extension cord 50 ft 10/3 outlet. High visibility neon colors for recognition. Flame resistant. 10/3 50 Foot Extension Cord Heavy duty outdoor jacket that is water resistant for added protection against moisture 10 3 extension cord extension wire heavy duty for appliances extension cord 50 ft.
  • 15 amp extension cord 50 ft extension cord outdoor 10 3 extension cord 50 extension wire for led lights extension wire outdoor extension wire cord extension cord 50 ft extension cord 50 ft outdoor extension cord 50 ft lighted extension cord 50 ft indoor extension cord 50 ft green extension cord 50 ft heavy duty.
  • 10 gauge extension cord 50ft 10 awg extension cord 50 ft extension cords outdoor extension cord 50 ft heavy duty 50 Foot Extension Cord With Lighted Ends - green US 50FT 10 Gauge Extension Power Electricity Cord Copper Wire UL approval 125V, 15Amp Current Cable W/Clear TRI-TAP Plug commercial extension cord 50ft 10 gauge.
Check Stock

0 Gauge Amp Kit Amplifier Install Wiring Complete 0 Ga Installation Cables 5000W

  • 18 Ft.- 1/0 Gauge Red Power Wire CCA (Copper Clad Aluminum)/ 3 Ft.-1/0 Gauge Black Ground Wire CCA (Copper Clad Aluminum).
  • 16 Ft.- 14 Gauge Clear Speaker Wire/ 18 Ft.- 18 Gauge Blue Remote Turn-On Wire.
  • 18 Ft.- Twisted Pair RCA Interconnect Cable/ 0 Gauge Black Wire Loom.
  • Heat Tested, Water Resistent InLine ANL Fuse Holder/ 200 Amp ANL Fuse/ 3 Positive (+) and 2 Negative (-) Connecting Terminals/ Wire Ties.
  • Wire Gauge Set To International Wire Gauge (Not AWG). Bulk Packaged. Not for Resale..
Check Stock

NVX XFMANL 0 to 4 Gauge Stackable Modular ANL Fuse Block Connecting Modular ANL Fuse Holder for 0 to 4 Gauge Wire.

  • VERSATILE FUSE HOLDERS ON THE MARKET: NVX’s XF-Series comes in two different sizes. Same technology, same function, but come in different sizes. The NVX XFMMINI accepts 4-8 wire gauge while the NVX XFMANL accepts 0-4 wire gauge. To change the size of the wire gauge you need, all you have to do is change the adapter collar to the correct wire size..
  • CONNECTS TOGETHER: NVX’s XF-Series of fuse holders now allows you to connect them together. The male and female connectors are located on the side of the fuse holder. Attaching them together is as simple as snapping the pieces together. No extra screws are required to connect them together. Each pack comes with power links to transfer power from one fuse holder to another..
  • GENERAL FEATURES: See-through windows allow for easy inspection | High-temperature, impact-resistant plastic casings | High conductivity plating | Ultimate circuit protection.
Check Stock

WMYCONGCONG 20 PCS 14 Gauge Blade Type Mini Size In-line Fuse Holder for Mini ATM APM Blade Fuse Automotive Use

  • Heavy duty in-line fuse holder, ideal for mini blade fuse, for car boat truck auto use, added protection to the circuit..
  • Mini size in-line fuse holder, ideal for ATM blade fuse, come with cover, protects it from dirt and muddy water..
  • 14 AWG wire, easy to automotive installation, cars, boats, motorbikes and trucks..
  • Package included: 20 pcs in-line fuse holder14AWG Wire..
Check Stock

Kicker 46FHD Car 2-Way Mini ANL - AFS Fused Power Wire Distribution Block FHD

  • KICKER brass hardware uses Versa-Gauge connection points with oversized convex screws for rock-solid connections..
  • The wire receptacles work with most size wire for clean, sharp install and a negative-post adapter collar that locks into place for a tight grip..
  • The KICKER FHD Dual Fuse Holder accepts 1/0 – 8 AWG power cables and accommodates any size AFS fuse..
  • FHD AFS Fuse Holder, 1/0-8AWG in/out, Dual Fuse.
Check Stock

Recoil PCK0 True 0 Gauge 99.99% Oxygen Free Copper Complete Amplifier Wiring Kits

  • 18 Ft.- 1/0 Gauge Red Power Wire CCA (Copper Clad Aluminum)/ 3 Ft.-1/0 Gauge Black Ground Wire CCA (Copper Clad Aluminum).
  • 16 Ft.- 14 Gauge Clear Speaker Wire/ 18 Ft.- 18 Gauge Blue Remote Turn-On Wire.
  • 18 Ft.- Twisted Pair RCA Interconnect Cable/ 0 Gauge Black Wire Loom.
  • Heat Tested, Water Resistent InLine ANL Fuse Holder/ 200 Amp ANL Fuse/ 3 Positive (+) and 2 Negative (-) Connecting Terminals/ Wire Ties.
  • Wire Gauge Set To International Wire Gauge (Not AWG). Bulk Packaged. Not for Resale..
Check Stock