ReviewsFuse Tap Mini

Pruveeo Smart Acc Hardwire Kit for Dash cam Enables Parking Mode Monitor Low Voltage Protection Gift 8 Fuse Tap Cable and Installation Tool 11.5ft 12V-30V to 5V/2A Mini-USB Port Charger Power Cord

  • [Comes with 8 Fuse Kits] You will get 1 x Mini USB to hardwire kit,1 x installing crowbar, 8 x fuse tap cable, 4 x Cable Hiding Clips dash cam....
  • Output: 5V/2A (also fits for 1A) this hardwire kit is compatible with all car mini USB dashcam such as dashcam,....
  • [ACC Feature] With the ACC detection feature, the dash cam will switch to parking mode automatically if the vehicle engine is off, and switch back to....
  • [24 Hours Surveillance] – Makes the parking monitor of your dashcam work! Keeps it powered even after the engine is off, protect your car all the....
  • [Low voltage protection] Built-in Smart low voltage protection system. If the voltage of your car battery drops to 11.8V or 23.5V, the regulator will....
Check Stock

Inline Fuse Holder, Ardor 4GA or 8GA in-Line Mini ANL (AFS) Fuse Holder with 1PC 80A Fuse for Car Audio Alarm Amplifier (AR1130N)

  • 【Quality Fuse Holder】The fuse holder made of high-quality transparent PC material has excellent dust resistance and durability, which can protect the fuse well. It is a very worthable fuse holder..
  • 【Waterproof and High Temperature Resistant】The 4 gauge fuse holder will not enter water after being immersed in water for a short time, providing waterproof protection for the fuse. It can be used at a high temperature of less than 130 degrees..
  • 【Compatible Wire Specifications】Suitable for 4-gauge wire or 8-gauge wire input and output, with a compatible current rating of 80A. This fuse holder can well protect the circuit from overload and short circuit..
  • 【Multipurpose Fuse Holder】Mini ANL (AFS) fuse holder is an ideal choice for inverters, car audio amplifiers and other 80Amp current applications, escorting your electronics equipment..
  • 【You Will Get】You will get 1 fuse holder with 1 80A Mini ANL (AFS) fuse with nickel plated. The mini portable size makes the fuse holder easy to carry and store. If you have any dissatisfaction with our fuse holder, please feel free to contact us..
Check Stock

MUYI 2 Set Mini Blade Fuse Holder 14 Gauge Waterproof Pigtail Inline Fuse Holder with 15A ATM Fuses

  • Material:copper+rubber, Fuse holder dimension:38x25x13mm.
  • In-line fuse holder for mini blade fuses, Suitable for 1A,2A,3A,5A,7.5A,10A,15A,20A, ideal for car truck atv boat.
  • 14 AWG thick red pigtail wire allow you to cut and splice it into any project, Wire length:30cm/12inches, Wire range:14 AWG.
  • Waterproof design, the rubber cap fits on tightly to protect any mini blade fuse inside.NOT easy to fall off or let water in..
  • Package Included: 2 X Mini Blade Fuse Holder and 2 X 15A Mini Blade Fuse.
Check Stock

Nilight - 50019R 272pcs Standard & Mini & Low Profile Mini Blade Fuse Assortment, 2A 5A 10A 15A 20A 25A 30A 35A Replacement Fuses for Car Boat Truck SUV Automotive

  • ALL SIZES YOU NEED: Covers 8 commonly used blade fuses, 272 PCs, mini: 2A 5A 10A 15A 20A 25A 30A 35A Blade Fuses, commonly used in most auto cars, trucks, SUVS, boats etc..
  • GREAT COMPATIBILITY: These assorted fuses are specifically designed for Car, Truck, SUV, ATV, UTV, Camper, RV, Motorcycles, Fleet, Golf Car, Boat, snowmobiles, and most general DC applications etc., covering such components as radio, light, turn signals, etc..
  • EASY INSTALLATION: Transparent appearance for quick inspection of fuse conditions, they can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top..
  • FUSE PULLER: The fuse puller is included in the mini fuse box, help you easily replace the fuse..
  • PACKAGE INCLUDE: 272 PCs Standard & Mini & Low Profile Mini Blade Fuse Assortment with a fuse puller..
Check Stock

Bussmann NO.43 ATM Mini Blade Fuse Tester/Puller Kit

  • Includes 42 Blade Type Fuses Of The 6 Most Popular Fuses.
  • Includes 7 Each Of The Following: Atm-5, Atm-10, Atm-15, Atm-20, Atm-25, Atm-30 & 1 Ft-3 Combination Fuse Tester/Puller.
  • It is complete with FT-3 fuse tester/puller.
  • It is reclosable, heavy-duty clamshell package.
  • Fuses meet or exceed OE and SAE standards.
Check Stock

140 Pcs - MCIGICM Car Mini Blade ATM Fuse Assortment, 5A 7.5A 10A 15A 20A 25A 30A Mini Fuse

  • 140pcs mini fuse in total, 20pcs for each values blade fuse: 5A 7.5A 10A 15A 20A 25A 30A. Different AMP in different color and AMP numbers carved on the fuse for easy recognition..
  • Blade Group: APM, ATM. This mini fuse assortment can protect your car and your electrical device from overload or short circuit..
  • These mini fuse widely used in car, truck, SUV, camper, motorcycles, boat, home general digital camera applications etc..
  • Comes with a carrying box and a helpful photographic diagram of the fuses locations on the back of the cover..
  • Two blade fuses pullers are included to help you easily and safely replace the fuse.***Please confirm the /Size/Voltage/Current/ before order***.
Check Stock

VANTRONIK Fuse Puller  for Car Boat Blade Fuse Mini Fuse and Standard Fuse 3 Pack

  • Package includes: you will receive 3 pieces of fuse pulling tools..
  • Safety protection: When the fuse gose wrong, you can handle it directly with your fingers, but sometimes it may still not work.
  • Using the car fuse fetch clips is more effective to solve the problems, while please be careful not to clamp the fuse too tight.
  • Quality material: the automobile fuse pullers are made of reliable plastic material, not easy to break or chip, durable and fully insulated..
  • Anti-skid grip: the yellow fuse removal tools adopt a textured design, which looks stylish and are convenient for you to control the fuse firmly and tightly without slipping, and then easy to remove or replace cartridge fuse.
  • Mini size: the dimension of the mini plastic fuse pullers measures approx. 3 x 1 cm/ 1.18 x 0.39 inches.
Check Stock

Keenso Car Fuse Remover, Multifunctional 12 Volt Fuse Puller Car Fuse Tester Removal Tool for MiniStandard Blade Fuse

  • 【Non-slip & Convenient】-- The end handle with anti-slip design, automotive fuse puller is convenient to use. Adjustable testing pins allows to be used on mini/standard and maxi automotive fuses.
  • 【Multi-Functional】-- This car fuse remover can be used as a practical tool to pull or remove the automotive fuses quickly and easily, check or test the blade fuse. Great tool for removing fuse blade.
  • 【Sturdy & Anti-abrasion】-- This fuse check is made of premium plastic material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • 【Space-saving & Compact】-- Mini size and compact, the multi-functional automotive fuse tester won't occupy too much space, carry it around easily with the convenience. Material: Plastic.
  • Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in.
  • 【Specifications】-- Condition: 100% Brand New, Material: Plastic, Color: Orange, Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in, Package Weight: Approx.19g, Fitment: For mini/standard and maxi automotive fuses, Package List: 1 × Fuse Tester.
Check Stock

Fuse Assortment Kit,306pcs Car Boat Truck SUV Auto Automotive Assorted Replacement Blade Fuses Standard & Mini & Low Profile Mini-2A 5A 7.5A 10A 15A 20A 25A 30A 35A with Fuse Puller Circuit Tester

  • 306PCS FUSES KIT: A full fuse set of 3 different sizes : Standard & Mini & Low Profile Mini,9 model: 2A/ 5A/ 7.5A/10A/ 15A/ 20A/ 25A/ 30A/ 35A,covers 27 commonly used blade fuses: 3 different sizes*9 models.Well organized in a plastic container,included: 90pcs Standard Fuses(10PCS of each model ).
  • 108pcs Low Profile Mini Fuses(12 PCS of each model )..
  • ALL IN ONE FUSE KIT: This is a universal set of fuses,nearly covers all commonly size,so they should work with almost any Vehicle,Car,Truck, SUV, ATV, UTV, Camper RV, Motorcycle, Marine, RV, Camper, Boat, Fleet, Golf Car, Snowmobiles, etc.Applied to a variety of low-voltage electronic.Suitable for every family that owns one or more cars.If you are unsure which sizes you should get,this car fuse kit is the best one..
  • EXCELLENT QUALITY: The blade fuses kit is made of high quality zinc alloy, which can fast and precise fuse current to protect your car from excessive current flow and short circuit.Covered with a transparent housings,helps you view the blown fuse status easily..
  • EASY IDENTIFICATION: Color Coded amperage makes it identifiable,just matched the right color with the original one. What's more,there are amp marking molded into transparent plastic,meaning the amp....
Check Stock

MGI SpeedWare Mini-ANL 12vDC Inline Fuse Holder, Surface Mount with Cover (With 50A fuse)

  • Protect your automotive, truck, or marine electrical from short circuit.
  • Simple installation. Mount where you need it, screw in the fuse, and attach your wire 4 / 8GA.
  • Clear cover ensures dust and moisture stays away from fuse.
  • Fuse is easy to replace. Use with 12-24vDC mini-ANL or MIDI fuses up to 200 AMP.
  • Package includes: 1 x Fuse Holder + 50A Mini ANL Fuse.
Check Stock

Standard Blade Fuse Holder & Fuse Kit - Muhize Fuse Tap 12V Car Add-a-circuit Fuse TAP Adapter Fuse Holder with 5 Amp Standard APR ATO ATC Blade Fuse (5 Pack)

  • PACKAGE INCLUDE - MuHize 5 x Add-A-Circuit fuse holder with heavy duty 16 gauge red color wire + 5 x 5 AMP Standard blade fuse..
  • DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
  • EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
  • WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for Standard blade fuses (rating 2Amp-20Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
  • HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..
Check Stock