ReviewsFutaba S3003 Servo Motors

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

  • You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
  • Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
  • Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
  • Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
  • Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.
Check Stock

5 Pack ShareGoo 25T Aluminum Servo Horns M3 Threads Metal Steering Arm for RC Car Truck Buggy Airplane-Black

  • 25T Spline & M3 threads, the 25t servo horn compatible with Futaba Savox Xcore HSP HD Power TowerPro MG servo MOSTLY 25T standard servo motor.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For Vehicle Type: for buggy, rc car, rc truck, rc truggy.
  • The metal 25t servo arms are better than most of the plastic material.
Check Stock

4Pcs MG996R Servo Metal Gear Torque Digital Servo Motor for Smart Car Robot Boat RC Helicopter

  • MG996R Micro Servo motor, which updated from SG90 Micro Servo and MG90S micro servo motor. The speed, tension and accuracy all increase..
  • Compatible with most standard receiver connector: Futaba, Hitec, Sanwa, JR..
  • Torsional moment: 12kg/cm(6V), 13kg.cm.at(7.2V).
  • Stable and shock proof, metal gear, connector wire length 300mm..
  • Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft for DIY..
Check Stock

WEISHUJI Aluminum Servo Horns,25T Aluminum Servo Horns,Aluminum servo Horn 25T Servo Horn Extension Steering Arm Server Rocker for RC Car Truck Buggy 5Pcs

  • Aluminum Servo Horns are made of High Quality CNC Machined Aluminum, sturdy and durable..
  • 25T Aluminum Servo Horns are compatible with Futaba, Savox, Orion, & Other Popular Servos (25T Aluminum Servo Horns Will Not Work On Hitec Or JR Servos)..
  • Aluminum servo horn 25t Dimension:aluminum servo horn 25t Length: 37mm/1.462 inches..
  • Distance from Servo Horn Extension Steering Arm Server Rocker hole center to Servo Horn Extension Steering Arm Server Rocker hole center：8mm, 11mm, 14mm, 17mm..
  • Package List of Aluminum servo horn 25t includes: 5 * Aluminum servo horn 25t.
Check Stock

10pcs RC 23T Servo Horn/Arm Aluminium Fit KO Sanwa Airtronics JR ACOMS Solar

  • 5pcs Servo Horn/Arm 25T Aluminium Alloy Fit RC Futaba Savox HD Tamiya HPI Ace.
  • Mounting holes spacing: at 31mm, 37mm and 44mm from center of the servo shaft (Approx.).
Check Stock

Traxxas 2071 Servo Case for 2070 Servo, 483-Pack

  • 【CHANGE DIRECTION OF ROTATION】Servo Reverser can change the direction of rotation of the servo. Just install them in series in the servo channel..
  • 【COMPACT SIZE】Compact size and light weight without putting extra burden on your drone and suitable for carrying anywhere. Perfect workmanship, easy to install and disassemble, the ideal upgrade accessory for your drone..
  • 【OPERATING VOLTAGE】5.0-6.0V (directly connected to the receiver), Current: 2A, Length: approx 6 cm / 2.36 inch..
  • 【STABLE PERFORMANCE】The RC servo signal reverser is made of PCB material, which is durable and solide to use for a long service life. High-precision PCB ensures stable performance and excellent functions, suitable for your RC done..
  • 【WIDELY USED】The Rotation Inverters widely used in JR Futaba Aircraft, RC Aircraft Steering Gear. Package includes 1x Servo Signal Reverser with JR male and female type plug..
Check Stock

TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)

  • Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
  • Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
  • 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
  • Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
Check Stock

WEISHUJI 25T Servo Horn Steering Arm, Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm for Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

  • 25T Servo Horn Steering Arm fits for Traxxas TRX4 Axial SCX10, SCX10 ii 90046 1:10 scale rc crawler, and Servo Horn 25T Steering Arm is CNC machined..
  • 25T Servo Horn Steering Arm has 18mm and 22mm threaded mounting holes for adjustability, and Servo Horn 25T Steering Arm is of high quality..
  • 25T Servo Horn Steering Arm is Red-Black, and Aluminum 25T Servo Horn Steering Arm is of small size and lightweight..
  • 25T Servo Horn Steering Arm works on Futaba, Savox, Emax, HSP, Power HD, Xcore, Aluminum 25T Servo Horn Steering Arm works on other popular prand servos motor (Except Hitec and JR Servos)..
  • Package of 25T Servo Horn Steering Arm includes: 1 x 25T Servo Arm (Red-Black), Servo Horn 25T Steering Arm, Aluminum 25T Servo Horn Steering Arm.
Check Stock

LAFEINA Aluminum Alloy 25T Adjustable Damping Servo Arm for 1/10 RC Crawler Car Traxxas TRX4 TRX6 Upgrade Parts (Titanium)

  • 25 Teeth Spline Steering Arm is CNC machined, and Spline Steering Arm Server Rocker makes it precise in size and stable in performance..
  • 25 Teeth Spline Steering Arm is compatible with Futaba Savox Emax HSP Power HD Xcore & Other popular prand servos motor, and 25T Servo Horn does not fit for Hitec and JR Servos..
  • 25 Teeth Spline Steering Arm is a great replacement part, and 25T Servo Horn fits for 1/8 1/10 RC Car Crawler..
  • 25 Teeth Spline Steering Arm includes a distance from hole center to hole center: 15mm, 18mm, and 25T Servo Horn 25 Teeth Spline Steering Arm is made of Aluminum alloy, strong and durable..
  • Package of 25 Teeth Spline Steering Arm includes: 1 x 25T Metal Servo Arm, Red, Spline Steering Arm Server Rocker, 25T Servo Horn 1 x 25T Metal Servo Arm, Black, 25T Servo Horn, 25T Servo Horn 25 Teeth Spline Steering Arm.
Check Stock

2Pcs Vgoohobby Metal 25T Servo Horn Steering Arm for Standard Servo Motors Compatible with Traxxas TRX4 Axial SCX10 Tamiya 1/10 RC Crawler Truck (Red-Black)

  • Compatible with Futaba Savox Emax HSP Power HD Xcore & other popular prand servos motor (DO NOT Compatible with Hitec JR Servos).
  • Fit for 1/10 scale rc crawler car ,for example,these are compatible with Traxxas TRX4 Axial SCX10 SCX10 ii Tamiya CC01 90046 1/10 rc crawler truck.
  • 25 Tooth Spline with M3 Threads,compatible with mostly standard servo motors..
  • 2 Mounting Positions:18mm & 22mm (Measured From Hole Center To Hole Center).
  • Small size and lightweight,easy to install..
Check Stock

ShareGoo 10PCS 25T Aluminum Servo Horns M3 Threads Metal Steering Arm Compatible with RC Car Truck Buggy Airplane-Blue,Red

  • 25T spline & M3 threads . Compatible with Futaba Savox Xcore HSP HD Power TowerPro MG servo MOSTLY 25T standard servo motor.
  • Adjustable type servo arm,includes two steel bolts to secure the split-clamp onto the servo output..
  • Hard aluminum construction for precision and durability..
  • For RC Scale Model Type: for rc buggy, rc car, rc truck, rc truggy.
  • Better than most of the plastic material,Pack of 10(5 of Red and 5 of Blue).
Check Stock