ReviewsG Thread Fittings

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....

Check Stock

2 Pack 1/2\ Female NPT and 3/4\ Male GHT (Garden Hose Threaded) Solid Brass Water Tank Connector, Bulkhead Fitting With 2 Rubber Ring

1/2" NPT internal thread, both sides can be easily installed 1/2" hose, faucet, pipe fittings, etc..
3/4" GHT garden hose male thread, suitable for any standard 3/4" garden hose fittings.The diameter of the external thread is 1.

Check Stock

Botanicare Ebb & Flow Fitting Kit with 2 Extensions

Use as ebb and flow fittings and bulkhead fittings.
Increased versatility: thread PVC pipe fittings into bulkhead fittings.
Ideal for use in aeroponic and drip applications.

Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....

Check Stock

Raincovo Pressure Washer Quick Connect Fittings, M22 14mm to 3/8 Inch Quick Connect Pressure Washer Hose Adapter, 4 Pieces

Includes 4 pieces adapters. Pressure washer quick connect fittings make it easier and faster to setup and takedown the hose..
Pressure washer adapters are used for power washer gun, hose and pump connections..
M22 14mm thread fittings are well made. Advanced technology to ensure the high precision of thread and no leaks..
3/8 Inch quick connect fittings are great for snap. Very smooth to attach and release..
Made of brass, high build quality ensures long life. Max pressure is 4500 PSI. Max working temperature is 300 °F..

Check Stock

Male Branch Tee Push to Connect Air Line Fittings 1/4 Plastic Plug Tube OD x 1/8 NPT Thread Quick Release Connectors 3 Way Union Fitting Pack of 10

Male Branch Tee Push to Connect Air Line Fittings 1/4" Tube OD x 1/8" NPT Thread Quick Release Connectors 3 Way Union Fitting.
Type: Male Branch Tee 1/4" Tube Od x 1/8" NPT Thread Push to Connect Pneumatic Air Tube Fittings..
High Quality Material: The connector made of high quality plastic and stainless steel.
corrosion resistance, ductility, hundreds of tests, durable, no air leakage..
Push-To-Connect Fittings: Maximum Pressure 0~145Psi.
Components: Male branch tee fitting is used to branch line from female thread in both 90°directions. 360°rotation, after installation, the tube direction can be changed easily. Easy to insert or pull the trachea by hand without the aid of a tool..

Check Stock

DOZYANT Weber 7503 21 Hose and Regulator with 1/8 NPT Male Thread with QCC1 Connection Replacement for Weber Spirit 500 & 700 Genesis 1000-5000 and Platinum I & II Gas Grills

21 Inch QCC1 Hose and regulator with 1/8" NPT Male Thread Fits Weber models Spirit 500 and 700, Genesis 1000 through 5000 and Platinum I & II gas....
Replaces Ducane part # G1129767, 20104302.
Weber part # 3604, 62565, 7503 and 93871.
SAFETY &CORROSION RESISTANT- Long lasting 100% Solid Brass Construction fittings,Provides secure, airtight connection between grill or fire pit and....
Please Note: The end is 1/8" NPT Male Thread NOT female. Does not fit current weber grills requiring a 3/8" female flare connection.
Includes 21 Inch length QCC1 hose, regulator. Suggest using PTFE Tape or adhesive to avoid fuel leaks. The size of the hose's inside diameter is 5/16....

Check Stock

Uenede 2PCS Solid Brass Bulkhead Fitting 3/8”Female x 1/2”Male Double Threaded Bulkhead Water Tank Connector

【Solid Brass】The metal parts of bulkhead fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【High Quality Thread】The bulkhead fittings are male and female thread, which are applicable models fitting for most items. Please check the size before ordering..
【Double Washers Double Protection】Two washers are respectively padded on both sides of the bulkhead to provide double protection. Better prevent leakage and make you more happy to use your rain bucket or something..
【Easy to Use】First you need to drill a hole of appropriate size for installation. Then pass the fitting through the bulkhead, pad the washers, tighten the nut. Finally connect the water pipe with appropriate size at the end. No doubt, it is easy to operate..
【Widely Used】The bulkhead fittings can be applied in water towers, water inlet and outlet, and self-made water storage barrels, suitable for various pipes, faucets, hoses, fittings, multiple uses to provide convenience for your life..

Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.

Check Stock

NOVINO Grease Zerk Fitting Tools Fits 1/4"-28 SAE,1/8"-NPT, M10x1 M8x1 and Grease Zerk Fittings with hex Size 3/8" 5/16" 7/16",Multi-Tool for Remove Install Rethread Damaged Broken Zerk Grease Fitting

2 set Heavy-Duty alloy steel galvanize grease zerk tool. One fits for 1/8"-NPT PTF grease zerk fitting, M10x1 and grease zerk fittings with hex size 3/8" (9.5mm) & 7/16" (11mm). One fits for Fits 1/4"-28 SAE, M8x1 and Zerk fittings with hex size 5/16" (7.85mm) & 3/8" (9.5mm).
A must have grease fitting multi-tool: 4 tools in one grease zerk kit---install,remove,re-tap holes( repair 1/8"& 1/4"-28 tap thread) and maintain zerk grease fittings .Make job more easier and save time..
Function 1---Remover and Installer. The silver sockets are grease fitting removal & install tool,used to removal damaged broken grease fittings OR install straight and angle grease zerk fittings( 30, 45, 65, 90 degree angles ).
Function 2---Thread Cleaner and Restorer.The black taps on the cross ends are grease fitting cleaning tool ,designed to clean out the threads of a clogged fitting and retreading repair correct fitting thread..
Wide use:Our grease zerk fitting tool kit is designed to meet requirements on tractor/loader/lawn mower/excavator/rotary ....

Check Stock

Hilitchi Hydraulic Zerk Grease Fittings Assortment Kit with Grease Zerk Caps (SAE-174PCS)

【✔】Made of Good Quality Brass and are Hardened to Prevent Wear. Anti-corrosion and Durable. The Grease Zerk Nipple mouth is flat and smooth, great for fastening. The thread is deeply, thread pitch more sturdy, it will not slippery when rotating..
【✔】174Pcs Assortment kit SAE grease fittings. Sizes include: SAE standard, inch size,Straight 1/4”-28 (25pcs).
We include 60pcs grease fittings caps can prevent the grease fittings from corrosion and contaminants..
【✔】GREAT USES: Our Straight & Angled Fittings are helpful to feed lubricant to your bearings and other mechanical devices without disassembly. Suitable for most automotive, motorcycle, truck, farm, and industrial applications..
【✔】NICE ASSORTMENT KIT: 174-Pieces, All of Product Will Be Packed in A Sturdy Transparent Plastic Case, Can Be Use for A Storage Box.
【QUALITY AFTER-SALE SERVICE】If you do not satisfy with our products or if you have any questions, please come to us, we would reply you within 12hours. We would solve all the problems to your satisfactio....

Check Stock