ReviewsGallon Filling

Homeright C800064.M M 5 Gallon Pail Feeder-Universal Fill Tube for Paintsticks

  • The HomeRight Pail Feeder accessory for the HomeRight PaintSticks and StainSticks easily fits most 5 gallon containers and is an alternative fill tube to use when filling a PaintStick or StainStick.
  • The 14 inch fill tube fits 5 gallon containers.
  • For smaller sizes, use a knife to cut the tube to the proper length.
  • The pail feeder locks to the side of the container for stability.
  • Once it is attached simply put the PaintStick, PaintStick EZ-Twist, StainStick or StainStick with Gap Wheel fill port on the fill tube and pull back the handle to fill.
Check Stock

Sawyer Products One-Gallon Gravity Water Filtration System (Single / Dual Bladder)

  • Easily create gravity-based water filtering system with dual-threaded mini water Filter and 1-gallon reservoir.
  • High performance filter fits in the palm of your hand.
  • 0. 1 micron filter removes 99. 99999% of all bacteria and 99. 9999% of all protozoa and cysts (also filters 100% of micro plastics).
  • Lightweight bladder with wide mouth for fast, easy filling.
  • Dual-threaded mini allows you to screw the push/pull cap onto the filter for easy on/off functionality.
  • Includes Mini water Filter, 1-gallon bladder, cleaning plunger, cleaning coupling, and gravity hose with adapters.
  • 100% of mini units individually tested three times to performance standards by sawyer.
Check Stock

20 Pcs 3 & 5 Gallon Water Jug Cap, Primo Water Bottle Caps, 5 Gallon Water Jug Lid Non Spill Reusable Bottle Caps Anti Splash Peel

  • ... friendly, odorless, won't leach any harmful chemicals into the water. Easy to clean and dishwasher safe..
  • 【SAFE AND RELIABLE】5 gallon water jug lid can prevent dust from entering,ensuring your drinking water remains pure and fresh during storage, perfectly for re-filling water cooler bottles for your home or office. You will always have the freshest water at your fingertips..
  • 【EASY TO INSTALL】Just put the 5 gallon water jug lids on top of the kettle, press down hard with your palm, a sound “POP” is a key point to make sure spill free. Tear off the excess on the side to remove it easily..
Check Stock

HEMLI One Gallon Water Bottle Insulated, 128 oz Insulated Stainless Steel Water Bottle, One Gallon Jug, Double-Walled Vacuum-Sealed Insulated Beer Growler, with Carrying Case, Thermo Flask

  • ...water jug for sports, camping, hiking, or everyday life. The double-walled insulation means your bottle will never sweat and the powder-coat paint makes for a great texture to assist in gripping..
  • BPA-Free Leakproof Lid - the durable chug lid is great for direct drinking or pouring and the 4.33-inch wide mouth makes filling with water and ice a breeze. The lid is sealed with a thick silicone gasket which prevents leaks and keeps your temperature constant. The tight seal and included stainless steel cup make this a perfect beer growler..
  • Each 128 oz insulated water bottle comes with a durable carrying case with faux leather accents. The carrying case has an attached handle loop to assist drinking and a sturdy shoulder strap to help carry the large metal water bottle. Each gallon thermos also comes with two 16 oz. stainless steel cups which are perfect for sharing with friends. We are so confident you’ll love this water bottle each 1-gallon water jug comes with a lifetime warranty against manufacturer defects. Hand Wash only..
Check Stock

Brinly PRT-362SBH-A 390 lb. Tow Behind Poly Lawn Roller with Easy Turn Plug, 18 by 36'

  • NEW Easy-Turn Plug: Brinly Rollers now feature a new drum plug design, making filling and emptying your roller quicker and easier than ever.
  • Ideal for medium to large yards: 36″ Rolling width and 390 lb. capacity is perfect for medium to large residential yards – covering more ground for quicker results. Perfect tool for erasing lawn damage from moles and frost, or packing down loose dirt, seed, or sod..
  • 42 gallon capacity: sturdy Roller holds up to 42 gallons (390 lbs.) of water or sand and is both rugged enough to withstand towing behind a tractor and light enough to easily move and store when empty..
  • Durable construction: Sturdy poly roller drum won’t dent or rust, and resists weather damage for use season after season. Measures 36″ In width..
  • Faster filling: includes fill opening with extra-large diameter to expedite filling and emptying of the drum. Can be easily filled with a garden hose..
Check Stock

Ziploc Half Gallon Marinade Food Storage Bags for Meal Prep, Grip 'n Seal Technology for Easier Grip, Open, and Close, 24 Count, Pack of 3 (72 total Bags)

  • Easy filling and storing of meats and marinades.
  • Expandable bottom stays upright for easy filling and storage.
  • Pack includes 72 Ziploc Half-Gallon Marinade cooking bags total.
Check Stock

Brinly PRT-482SBHC-A 485 lb. Tow Behind Poly Lawn Roller with Easy Turn Plug, 18 by 48"

  • NEW Easy-Turn Plug: Brinly Rollers now feature a new drum plug design, making filling and emptying your roller quicker and easier than ever.
  • Ideal for large yards: 48" Rolling width and 485 lb. capacity is perfect for larger yards or bigger greenspaces - covering more ground for quicker results. Perfect tool for erasing lawn damage from moles and frost, or packing down loose dirt, seed, or sod..
  • 54 gallon capacity: sturdy Roller holds up to 54 gallons (485 lbs.) of water or sand and is both rugged enough to withstand towing behind a tractor and light enough to easily move and store when empty..
  • Durable construction: Sturdy poly roller drum won't dent or rust, and resists weather damage for use season after season. Measures 48" In width..
  • Faster filling: includes fill opening with extra-large diameter to expedite filling and emptying of the drum. Can be easily filled with a garden hose..
Check Stock

True Composites 2 Part Urethane Pour Foam, 2 Lb Density, Marine Foam for Boat Flotation, Sound Proofing, Foam Insulation, Post Hole Foam, 1 Gallon Kit

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

4 Lb. Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • 4LB. Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 2 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • The 4LB density also works well in floating decoy or taxidermy applications as well as many other sculpting, casting, carving and other filling applications.
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock