ReviewsGalvanized Gate

2 Pack Chain Link Fence Gate Post Hinge - Use for Outside Diameter Post/Pipe - Galvanized Chain Link Post Gate Hinge - Nut/Bolt Included (1-7/8 Inch)

  • √.Gate hinges are made of anti- rusting galvanized steel with zinc powder, long lasting ensured.
  • √.Gate hinge fits for 1-7/8" OD posts/pipes, suitable for most general chain link gates.
  • √.Serve as connector to chain link fence gate post for smooth gate operation.
  • √.Nuts/Bolts for Gate Hinge are Include.
Check Stock

2 Pieces Inside Deadlock Garage Door Side Lock Heavy Duty Galvanized Steel Housing Extra Security Lock for Most Garage Door

  • High Quality Material: This inside deadlock is made of high quality galvanized steel, provides extra security for your garage door, very durable even in a long term-usage.
  • Screws included & Easy Installation: The garage door side lock fits most garage doors, such as wood gate ,metal gate ,vinyl gate. And you can install on the left or the right ,in both directions is OK and works well..
  • Works Only from Inside: The deadlock engages in a vertical track and works only from the inside as an additional security lock.
  • Application: Use our galvanized garage side lock serve as an additional security lock for nights, vacations, and when you are not at home..
  • Double lock, Double security: Only one bolt is not secure enough, so we have two locks for this pack ,you can set on the left and right of the garage ,to keep the door more safe and not easy to break in..
Check Stock

Chain Link Fence Residential Double Gate Latch 1 3/8\ | Strong Arm Double Gate Latch for Swing Gates

  • Securely latch your residential chain link gate with this heavy-duty, commercial grade double latch.
  • Made from high-quality steel that has been hot-dipped galvanized to prevent rusting, this double gate latch is built to last.
  • This residential gate latch is built to fit 1 1/4" fence posts and 1 3/8" gate frames while also allowing it to be padlocked.
  • Is easy to install and can be horizontally adjusted.
Check Stock

GBGS 4 Sets 1⅜' Chain Link Fence Gate Fork Latch - Steel Heavy Duty Load 220 lb Fence Gate Latch -Hot Dip Galvanized Fence Gate Latch with Hole for Padlock

  • Surface treatment :Hot-dipped galvanized, strong corrosion resistance and friction resistance..
  • Applicable gate frame diameter:1⅜ inches(φ35mm), gate post diameter:1¼ inches(φ32mm).
  • Thickness: 4 mm, screw diameter: φ9.5 mm.
  • Easy to install chain link fence gate steel gate hardware. Nuts/bolt included with gate latch. Great for building or repairing a chain link gate.
Check Stock

1-3/8\ x 1-3/8\ Chain Link Fence Gate Latch, Galvanized Fence Fork Latch Lock Wall Mount with Hole for Padlock

  • ☆【SIZE】HITTITE dog kennel gate latch can be used for any fence that from 1-1/4'' to 1-3/8" gate frame and from 1-1/4'' to 1-3/8" panel frame..
  • ☆【SAFE】1-3/8" Chain link gate latch with professional design to resist dog accidental opening of gate, safely and securely keep pets..
  • ☆【EASY TO INSTALL】The 1-3/8" Dog Kennel Lock is easy to install and operate, comes with all necessary hardware..
  • ☆【ANTI-RUST & DURABLE】HITTITE 1-3/8" butterfly latches are made of galvanized steel to prevent rust and corrosion..
  • ☆【INSTRUCTIONS】Spacing between Kennel Gate and Kennel Panel should be approximately 1 inch. Pre-measure gate frame and panel frame prior to purchase to ensure You don't order incorrect product.
Check Stock

Skelang 2 Pcs Chain Link Gate Latch, Chain Link Fence Locks 1-3/8" x 1-3/8", Galvanized Fork Latch for Metal Gate

  • MATERIAL: Made of sturdy steel with galvanized coat, durability and rust resistance for outdoor use.
  • SIZE: 1-3/8 inches for gate frames and 1-3/8 inches for gate post.
  • SECURITY GUARD: Latch your gate to the post easily and keep your chain link gate securely shut, having a hole for padlock, can add extra safety guard (Padlock is not included).
  • GREAT FOR: Chain link fence gate and kennel, preventing dogs or other pets leaving your place. Also can be a replacement fork latch for the old or broken ones.
  • EASY TO INSTALL: Come with bolts and nuts for installation, easy to fasten on your fence gate and post.
Check Stock

Chain Link Fence Gate Wheel for Metal Tube Swing Gate - 6' Hot Galvanized Heavy Duty Gate Wheels for Cattle Fence Gate, Tooltriz

  • 【High support weight】An actual high-strength fence gate wheel with the capacity of 550 pounds. The wheel's width and curved rim make it adaptable to all kinds of roads, gravel road, dirt road, and cement road..
  • 【Good structure】The tire is real solid rubber with good elasticity and quiet function. Bearings are standard ball bearings, bearing capacity and service life are much higher than other bearings..
  • 【Hot-dip galvanized thick frame】The wheel frame adopts new technology, high strength, and hot-dip galvanized.
  • longer rust prevention time. In addition, the steel plate is more thikcer than ordinary products..
  • 【Standardized chain link fence parts】After a few years, it is easy to buy and find accessories if the bearing or wheel is damaged, save you money..
  • 【Stainless steel bolts with locknuts】This gate wheel adopts Stainless steel bolts and stainless steel locknuts. Therefore, there will not happen the gate wheel can't disassemble because of rust..
Check Stock

TOPENS MK01 Mounting Hardware Fasteners Bracket Release Key Set for TOPENS Swing Gate Opener Replacement

  • ... and RK700/CK700 DSR/DK series sliding gate opener..
  • Including 1 x PSO Part (Used in Push-to-Open Installation Mode for Opening Outwards), 1 x Post Pivot Bracket (Used in Pull-to-Open Installation Mode for Opening Inwards), 2 x Post Bracket, 1 x Gate Bracket, bolts, pins, nuts etc. for TOPENS swing gate openers..
  • The galvanized steel bracket set is used to connect the arm of the TOPENS Swing Gate Opener to the gate post..
  • Pull/Push-to-open gate bracket allows the arm (actuator) to open into/away from the property, easy DIY installation..
  • 【Outstanding Customer Service】- Backed by a 12-month TOPENS Warranty, and free product return & exchange service within 30 days. Our complimentary TopensCare+ Customer Support provides you comprehensive system solutions. Simply contact us via our service Email for any concerns during product installation and use. We are quite sure that you will be super-impressed with HIGH QUALITY of our product..
Check Stock

2 Pack Chain Link Fence Gate Post Hinge for 1-5/8\ Outside Diameter Post/ Pipe, Pressed Steel Galvanized Chain Link Post Gate Female Hinge - Nut/Bolt Included for Hinge

  • √.Gate hinge is made of anti- rusting galvanized steel with zinc powder, long lasting ensured.
  • √.Post hinge fits for 1-5/8" OD posts/pipes, suitable for most general chain link gates.
  • √.Serve as connector to chain link fence gate post for smooth gate operation.
  • √.Female chain link fence gate frame hinge with 5/8" Hinge Pin Hole.
  • √.Nuts/Bolts for Gate Hinge are Included.
Check Stock

Gate Fork Latch - 1-3/8\ Fork, Wall Mount for Chain Link Fence Gate | Chain Link Fence Hardware | Gate Latch

  • Support Door Weight Up to 500lbs---Tire grade solid rubber material, supper wear-resistant. Hot dipped galvanized finish steel for rust free..
  • Universal Use--- Mofeez gate helper wheel rolls easily over concrete/ grass/ pasture ground. If you plan to use it on soft pea gravel, we suggest you put something in the ground along the wheel path for it to ride more smoothly..
  • Lift your Gate Up to 8-3/4"--- Diameter:6”. There is 8-3/4" from the bottom of the wheel to the center of where the pipe would attach, so the door could be lifted up to 8-3/4". Width of tire:1-1/2” flat wheel will roll over your driveway's crushed rock surface..
  • Only for Round Fencing Pipe--- Helper gate wheel could be used on both pipe farm gates, chain link gates or any other gate that has a bottom ROUND pipe measuring 1-5/8” through 2”. NOTE: Check your gate frame diameter first..
  • Easy to Install --- Just prop the gate up to the height you need and attach the wheel on the bottom rail of the gate. Tighten U-bolt nuts securely until helper gate wheel couldn’t slip around the pipe..
Check Stock

Chain Link Fence Butterfly Gate Latch 1 3/8\ x 2 1/2\ | Fence Gate Latch | Gate Latch

  • Designed to fit 1 3/8" gate frames and 2 1/2" gate posts.
  • Made from high-quality and durable steel that is galvanized to be rust-resistant and long-lasting.
  • This butterfly latch is easy to adjust and install on to chain link fence gates.
  • A great and easy way to securely lock your chain link gate.
Check Stock