ReviewsGalvanized J bolts

VEITHI Dock Cleats 6 inch 4 Pack - Hot Dipped Galvanized Boat Cleats Rope Cleat Anchor Line Cleat Boat Dock Cleats Ideal for Boat Docks Decks Piers for Tying up Boats Kayaks Marine Decor

  • Rough Cast Hot Dipped Galvanized Iron -These are well durable galvanized cleat, 100% protected against rust. include 4 boat cleats with 8 bolts and nuts ready to use indoor and outdoor.these can hold their own against the weather..
  • Hexagonal Hole for Easy Installation - Boat tie down cleats bolt will stay in place when securing the cleat. no more holding the bolt with one hand and tightening with the other..
  • Wide Footprint for Strength - Boat dock cleats 6 inch large bottom footprint for additional strength,perfect as cleat hook for boat docks, decks, piers for tying up boats, kayaks and jet ski's..
  • Size&Hardware- These dock cleats 6 inch L x 1.3 inch H ,base measures 2.2 inch x 0.9 inch.
  • mounting holes 1.25 inch center to center,boat cleats with hardware - M6x 3.25 inch(83mm) bolts and nuts included, perfect size to fit any use, bolts can be cut if needed..
  • Home Nautical Decor- Galvanized boat cleats 6 inch make your home stand out.
  • perfect for maritime, beach, garden, pool, coastal decorations.
  • use them as cabinet pulls, boat cleat hooks for towels, rustic coat hanger, curtain tie-backs, nautical coat hooks..
Check Stock

ARONOVA Adjustable Battery Hold Down,Universal Crossbar with 8''length,18-8 (304) Stainless Steel J bolt sets

  • Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
  • Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/10/11/12 inch j bolts..
  • Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
  • Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

Spasilk Raised Dot Blanket, Baby Blanket with Satin Trim, Minky Baby Blanket, Pink

  • 【 】Raised garden beds outdoor is made of double-layer galvanized metal sheet with anti-rust coating to avoid rusting. The nuts and bolts are also galvanized. Super stability and rust resistance means this garden bed will last for years..
  • 【 】The thickness of the planter box is 0.8 mm, and the thickest overlap of galvanized sheets can reach 1.8 mm.Adding screw fastening edge at the interface. Oval design makes it possible to pack a lot of soil and they held their shape without deformation..
  • 【 】Metal raised garden bed size is 47.2 "L x23.6 "W x 11.4 "H. The top edge of the garden bed comes with a black rubber sealing edge for reinforcement as well as to prevent injury.Extra large growing space is perfect for most plants in the garden..
  • 【 】Galvanized raised garden bed kit with detailed assembly instructions and gloves to get you assembled in just 10 minutes, complete with extra galvanized nuts and bolts. You can move it anywhere to assemble it or carry it to where you want..
  • 【 】Open base provides good drainage and effectively protects ....
Check Stock

ARONOVA Adjustable Battery Hold Down,Universal Crossbar with 10''length,18-8 (304) Stainless Steel J bolt sets

  • Premium iron crossbar & Stainless steel j bolt sets,anti-rust, sturdy and available for long service life..
  • Adjustable crossbar, from 5.35" to 7.85" wide,available in 8/9/10/11/12 inch j bolts..
  • Exclusive finishment,thermoset baked-on Premium powder coat finish for a bright and durable surface..
  • Simple design,easy installation, directly replace your broken one, convenient to use.A perfect modification accessory for racing, sports car, RV,boats,etc..
  • Tips:Before ordering, please measure the battery size to confirm the bracket fit and select the proper bolt length..
Check Stock

ALEKO Dual Swing Driveway Gate| 16 x 6 Feet Anti-Rust Galvanized Steel Gate w/Warranty| Outdoor Gate Fence Gate Swing Gate Security Gate| Steel Barrier Gate| (Style: Paris)

  • Dual-swing driveway gate - ALEKO’s 18x6-feet dual-swing gate features 4-point welding that adds stability to the gate to ensure longevity and top performance. It’s made of hot-dipped galvanized steel and has a powder paint coating to preserve the gate's timeless beauty and save it from rust and weather damage..
  • Enhance the aesthetics of your home - The Paris-style metal gate has a European-inspired design that has a smooth arch at the top stylized by closed single-swirl spirals, giving your steel gate an elegant look..
  • Complete gate-building kit - The black galvanized steel gate kit includes 2 gate panels, 2 gate posts, and 4 LM114 5/8 inch regular hinge j-bolts..
  • Privacy and safety - This driveway gate can be used for any place that requires a wide yet sophisticated outdoor gate enclosure. Outdoor gates can make your home less visible and keep your pets and children safe..
  • Stylish security for your home - Here at ALEKO, we understand that your home is your sanctuary. That's why our stylish outdoor gates are designed to not only provide security and privacy but to also add an e....
Check Stock

DuroSTEEL Janus 8'x8' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DuroSTEEL Janus 10'x9' Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

(10) 3/4-10x2#3 Grade 8 Dome Head Plow Bolts Plain & Oil

  • Price For: Each Finish: Zinc Material: Carbon Steel Head Type: #3 Flat Item: Plow Bolt Head Angle (Deg.): 80 Type: Countersunk Square Neck Grade: 5 Includes: Nut Square Width: 0.450" Head Height: 0.364" Head Dia.: 0.826" Meets/Exceeds: SAE J 429, SAE J 995 Thread Size: 7/16"-14 Tensile Strength (PSI): SAE J 429, SAE J 995 Length: 2" Key Height: -.
  • Key Width: - Country of Origin (subject to change): Multiple.
Check Stock

DuroSTEEL Janus 10'x12'Commercial 1000 Series Metal Roll Up Door & Hardware Direct

  • General: Pre-assembled for time and money savings. Utilizes 9 ½” diameter drum wheel. Maximum opening size of 12’ wide x 14’ high (168 sq.ft.). Push-up, hand chain and internal. Electric operations. Reduced drive chain hoist is right hand only..
  • Curtain: 26-gauge galvanized corrugated steel. Grade 80 steel. 20 standard colors (special colors upon request for a nominal upcharge). Super Durable Polyester paint coatings, which are corrosion resistant. Wash coat over primer interior side. 40-year film integrity warranty — up to 25-year chalk and fade. Flexible nylon wear strips..
  • Bottom Bar: 24 gauge acrylic-coated galvalumed roll formed steel. 2” x 1 ½” galvanized angle. Bulb astragal (Durometer 75). Stainless steel bolts..
  • Axel/Torque Tube: 1” O.D. steel axle, 12-gauge. Oil tempered torsion springs conforming to ASTM A229. 18-gauge, 9 ½” diameter galvanized drum. Low friction, grease-filled steel ball bearings staked in each drum. 26 gauge spiral torque tubing that houses axle assembly..
  • Guide: 16 gauge galvanized. Vinyl guide wear strip. Bolt on head stop ¼” thick steel. 2 ¼” guide dept. Pre-punched for lock. Universal jamb mount. Hardware: Bottom bar mounted 12 gauge slide locks - 2 per door. Bottom bar mounted 16 gauge step plat....
Check Stock

DNJ HBK260 Head Bolt Kit for 1999-2016/ Acura, Honda, Saturn/ 3.0L, 3.2L, 3.5L, 3.7L/ V6/ 24V/ SOHC/ 212cid/ J30A4, J30A5, J32A3, J35A1, J35A4/ ELECTRIC/GAS

  • FITS: 99-16 Honda, Acura, Saturn 3.0L-3.7L V6 SOHC Naturally Aspirated J35Z8,J35Z2,J35Z4,J37A4,J35Z6,J35Z5,J37A1,J37A5,J37A2,J35A6,J35A8,J32A3,J35A9,J30A5,J35A5,J30A4,J35A4,J35A1.
  • FITMENT NOTES: One Set Services Complete Engine, w/ 12-Point Head, w/o VCM.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

2Pcs Toilet Seat Screws, Steel Toilet Seat Hinge Bolts and Nuts, Heavy Duty Toilet Seat Fastener with Plastic Nuts and Metal Washers, Toilet Hardware Replacement for Top Mount Toilet Seat Hinges

  • ...rews are made with steel and premium plastic material for long time usage, no slippage, no rusting, and excellent tightly fit. Toilet seat hinge bolts and nuts kit also includes metal washers and plastic down lock nuts for perfect fastening..
  • [USEFUL TOILET HARDWARE] - The galvanized-steel Toilet Seat Hinge Bolts and Screw are much better than the plastic ones. Update your loosing with bolt with the steel toilet seat hinge bolts, there will be no more wobbly toilet seats, and the toilet seat's nut/bolt was never getting lose any more..
  • [WIDE COMPATIBILITY] – The toilet seat fastener replacement hinge bolts universally fit for most toilet seat. The toilet hardware replacement bolts and nuts are compatible with TOTO, Kohler, American Standard Toilets and Others..
  • [EASY TO INSTALL] - The Toilet Seat Screws Kit includes all installation parts: galvanized-steel bolts, plastic nuts and metal washers. The universal toilet seat hinge bolts and screw can be installed with a household tools and takes only a few minutes. It’s an efficient solution to fix the problem that toilet seat's nut/bolt was getting lose and n....
Check Stock