ReviewsGalvanized Steel Tubing

AAGUT 100 Packs 12 Inch Garden Stakes Staples Heavy Duty 11 Gauge Galvanized Steel Landscape Staples Fence Ground Stake Sod Pins Yard Stakes Tent Anchors for Dog Fencing, Chicken Wire

  • 12 INCH 11 GAUGE STAKES - 12" length, 1.5" width, 11Ga (3.0mm) diameter, 100 pack extra heavy duty galvanized 12 inch metal garden stakes sinks deep into the ground, great for outdoor use, can secure tents, dig dog fence, outdoor netting, chicken wire mesh, invisible fencing, gardening fabric, weed barrier fabric,Christmas decorations.25 pack see ASIN B07JK93BW1,50 pack see ASIN B07JK12DHY..
  • SHARP ANGLED ENDS - Heavy duty ground stakes/tent pegs/landscape fabric pins, sink deeper in the ground for better securing. Chisel pointed ends make for easy insertion by hand, foot or hammer if needed.Steel landscape sod staples are designed to enhance your flower garden, outdoor landscape fabric, garden mat, artificial grass turf, tarp, frost cloth, hardware cloth, patio, yard decorations, chain link fence, ground cover, lights, plastic, electric wire, lawn and countless items..
  • MULTIPLE USES - These lawn staples can be used on landscaping garden plants, plastic, garden fabric, soaker hose, holiday decorations, sod grass, garden edging, chain link, garden hoses, gardening cloth, mulch sheet and fleece, bottom of fences, canopies, tarps, irrigation lines, tomato cages, light, artificial turf, tarpaulins, groundsheets, exterior fleece, electric wire, rose garden, ....
Check Stock

Ambient Weather EZ2-35W2MC Weather Station Pole Mounting Kit

  • Includes (6) 14 x 1.25 (diameter) inch masts that you can assemble to your desired height (fully assembled height is 66 inches).
  • Also includes (2) 1.25 inch clamps and (4) ¼ (diameter) x 3 inch lag screws for mounting to any vertical surface.
  • Constructed of galvanized, rust proof 10-steel tubing.
  • Add a mast extension to extend the pole an additional 35 inches (sold separately).
  • NOTE: Anemometer pictured is not included.
Check Stock

AAGUT 12 Inch Garden Stakes 50 PCS Fence Ground Stake Heavy Duty Yard Landscape Staples Galvanized Tent Spikes 11 Ga Lawn Pins for Dog Fencing, Drip Irrigation Hose, Weed Barrier Fabric, Chicken Wire

  • 12 INCH 11 GAUGE STAKES - 12" length, 1.5" width, 11Ga (3.0mm) diameter, 50 pack extra heavy duty galvanized 12 inch metal garden stakes sinks deep into the ground, great for outdoor use, can secure tents, dig dog fence, outdoor netting, chicken wire mesh, invisible fencing, gardening fabric, weed barrier fabric,Christmas decorations.100 pack see ASIN B085LRVQWC..
  • SHARP ANGLED ENDS - Heavy duty ground stakes/tent anchor spikes/landscape fabric pins, sink deeper in the ground for better securing. Chisel pointed ends make for easy insertion by hand, foot or hammer if needed.Steel landscape sod staples are designed to enhance your flower garden, outdoor landscape fabric, garden mat, artificial grass turf, tarp, frost cloth, hardware cloth, patio, yard decorations, chain link fence, ground cover, lights, plastic, electric wire, lawn and countless items..
  • MULTIPLE USES - These lawn staples can be used on landscaping garden plants, plastic, garden fabric, soaker hose, drip irrigation tubing, holiday decorations, sod grass, garden edging, chain link, garden hoses, gardening cloth, mulch sheet and fleece, bottom of fences, canopies, tarps, irrigation lines, tomato cages, light, artificial turf, tarpaulins, groundsheets, exterior fleece, electric wire, rose gar....
Check Stock

Ambient Weather WH31LA Leak Detector for Models WS-2000 WS-5000 Weather Stations

  • Includes (6) 14 x 1.25 (diameter) inch masts that you can assemble to your desired height (fully assembled height is 66 inches).
  • Also includes (2) 1.25 inch clamps and (4) ¼ (diameter) x 3 inch lag screws for mounting to any vertical surface.
  • Constructed of galvanized, rust proof 10-steel tubing.
  • Add a mast extension to extend the pole an additional 35 inches (sold separately).
  • NOTE: Anemometer pictured is not included.
Check Stock

12 Inch [ 9 Guage ] Garden Landscape Staples Stakes Pins SOD | 50 Pack | Galvanized Steel | for Weed Barrier Fabric, Ground Cover, Soaker Hose, Lawn Drippers, Drip Irrigation Tubing

  • ... heavy duty professional grade quality landscape staples garden stakes meticulously crafted to extenuate all your home projects. Longer and stronger steel design for enhancing your outdoor landscapes, patio, home, and landscaping projects..
  • DURABLE STAKE WITH SHARP ENDS & ADJUSTABLE WIDTH: Thicker and steadier galvanized steel stakes for super holding power with sharp ends for easy ground insertion and rugged stakes to suspend, anchor and harness a multitude of items including edging, chain link, lighting, plastic, electric wires, pet invisible, inground, underground. The sharp ends stakes is adjustable to be suitable width for your home projects..
  • RUST RESISTANT & EASY TO USE: Unique pro grade galvanized steel design makes the garden staples rust resistant for your container gardens, raised bed, herb, rose, bulbs, vegetable & flower gardens projects. Easy to use in the landscape, lawn or garden to pin down countless items..
  • 100% SATISFACTION GUARANTEE: Refund or replacement within Amazon policy is guaranteed! Providing you with a thoughtful and considerate service..
Check Stock

BTSHUB Exhaust Pipe Cutter - 3/4 to 3 Inch Exhaust and Tailpipe Cutter Chain Exhaust Cutter Tool - 15 Blades for On- and Off-Vehicle Use

  • High-Efficiency Pipe Cutter: Quickly remove old exhaust pipes with the Exhaust Pipe Cutters.
  • Chain tubing cutter allows you to cut pipes and tubes from 3/4 to 3 inches (19 to 76mm) in diameter with a 3mm thickness. Suitable for mild steel, galvanized steel, copper, and aluminum pipes.
  • Unique Design: 10 inches (25.4cm) cutting wheel link chain wraps around your pipe even in tight restricted areas.
  • Pivot design ensures your cutting blades touch the outer walls of your pipe for smooth cuts. There is a cutting wheel on each roller for smooth tracking..
  • High-Quality Blades: High-quality carbon steel cutting blades effectively cut through metal and plastic.
  • Each exhaust tube cutter wrench tool features 15 cutter blade wheels, only a 1/4 inch rotation is needed for a complete cut..
  • Easy to Use: Pipe cutter wrench design allows you to anchor and create leverage when cutting into your pipes and tubes.
  • Once your tubing cutters are wrapped around the pipe, squeeze lightly and turn to cut into the material.
  • Comfortable Grip: 9.3 inches (23.6cm) exhaust pipe cutting tool has 3.8 inches (9.7cm) rubberized handles.
  • Cushioned for comfort and non-slip security. If have any item's quality problems, we will solve for you. We'd like to resend a new....
Check Stock

Cutting Wheel 4-1/2 Inch 100 PCS Cut Off Wheel 4.5"x.047"x7/8" Cutting Disc Ultra Thin Metal & Stainless Steel,Cutting Wheel Fits Angle Grinder Saw Grinder Metal Cut Tools

  • FITS ANY ANGLE GRINDER :Grinder blades is 4.5"x.047"x7/8" total in 100 PCS.Fit for 4-1/2”Angle Grinders and compatible with All 4-1/2”Angle Grinders..
  • MULTIPLE UESES : Grinding Wheel are designed for cutting fiberglass, steel, iron, plastic, stainless steel, and other ferrous metals for aggressive cutting action.Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel.fast burr free cutting.
  • Package List:100Pcs 4 1/2 Inch Cut Off Wheel.
Check Stock

DSBGKJI 10 Pcs TEE Joint Fence End Pipe Clamps Fit Tube OD 1¼x1¼\

  • 【Fits】Outer diameter φ32mm (1¼ inches) chain link fence tubing, posts and rails..
  • 【Material】End rail clamps are made from heavy-duty and high-quality pressed steel that has been galvanized to prevent rusting, smooth without burrs, corrosion resistance, thickness: 1.2mm..
  • 【Easy to install】You can easily create a TEE joint connector, no professional skills required..
  • 【Product size】LxWxH: 89x40x38mm / 3.5x1.57x1.5 inches. Duckbill length: 60mm (2⅜ inches)..
  • 【Screw hole diameter】φ5mm. NOTE: Screws not include..
Check Stock

Basement Window 4-Step Galvanized Steel Emergency Escape Ladder with 300 lb. Weight Capacity

  • Professional grade 4-step egress escape ladder for use in basement window wells 54 in. to 66 in. in depth.
  • Constructed of galvanized steel tubing. No tools required for assembly. Assembles and installs in minutes.
  • Anti-slip rung tape included Graspable handrails for quick and easy escape.. Installs quickly and securely to typical corrugated steel basement window wells using only 2 self-tapping screws.
  • Typical for corrugated metal wells but will mount inside all types of basement window wells (metal, concrete, plastic, block, timber etc.) with the use of alternative mounting hardware (not included).
  • Mounts to concrete foundation walls to aid in climbing into basement windows with over a 44 in. sill height as required by IFC and IBC code (must use alternative wedge anchor mounting hardware). Meets or exceed IFC and IBC building codes. 300 lb. weight capacity.
Check Stock

48 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 48" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock

18 Galvanized Flexible Exhaust Tubing 5 Diameter Flex Pipe with 2 Band Clamps

  • One pre-cut 18" section of galvanized flexible exhaust tubing with 2 5" exhaust band clamps This exhaust pipe is 5" in diameter and can be used to....
  • The flexible nature of this type of exhaust tube allows for easily installation.
  • Flexible tubing is primarily used to help reduce and prevent excessive stress on your current exhaust system.
  • It does this by absorbing vibration and thermal expansion.
Check Stock