ReviewsGap Filling Sealant

Gorilla Epoxy .85 Oz, Clear, 5 Pack (4200101)

  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance.
  • plenty of repositioning time for the perfect fit.
  • separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.
Check Stock

Dap 18814 12 Pack 10.1 oz. Premium Polyurethane Construction Adhesive Sealant, Gray

  • Dap Premium Polyurethane Construction Adhesive Sealant is a one-part, moisturecuring, non-sag elastomeric commercial-grade sealant.
  • It is specifically formulated to provide a long-lasting, durable seal when filling exterior gaps, joints and cracks.
  • This high-performance sealant offers superior adhesion to most substrates and remains flexible to withstand up to 70% total joint movement when installed into a properly prepared joint.
  • Exceptional cut and tear resistance. Handles foot & vehicle traffic and may be used above or below waterline (including potable water applications).
  • Ideal for use on window and door perimeters, horizontal & vertical joints, aluminum, vinyl or fiber-cement siding, siding corner joints, expansion and control joints, pre-cast panels, fascia, tuck pointing, ducts, vents, skylights, common roofing detail applications, foundations, chimneys and flashing, eaves, downspouts.
Check Stock

COTISEN Sectional Matrix Dental Band Wire Mouth with Silicone Clearance Wedge Wooden Guard Tooth Clamping Ring Anti-Stick Material(Medium)

  • Anti-stick type: All the matrix band are coated with Teflon non-stick material, which can prevent the matrix band from sticking to resin material during dental restoration, and make the filling resin surface smoother and reduce the adhesion of plaque..
  • Clamping ring:The design of the V-shaped clamping head can fix the two ends of the interdental space and make full contact with the wedge for more accurate positioning..
  • Ordinary matrix band: Made of super-elastic stainless steel, suitable for resin filling. The shape of the adjacent surface formed by the filling is closer to the physiological anatomy of the natural tooth, reducing Less overhangs, restore good contact points, thereby establishing correct adjacency to prevent food impact..
  • Subgingival matrix band: Extend the bottom on the basis of the conventional watercress forming sheet, suitable for repairing the defect close to the neck of the tooth..
  • Dental wedge: It is used to stabilize the forming sheet during the dental restoration process, close the gap of the gingival margin, and make the bottom of the forming sheet and the tooth. The body fits closely to improve the filling quality. The appropriate gap wedge can be selected according to the size of the tooth gap..
Check Stock

COTISEN Sectional Matrix Dental Band Wire Mouth with Silicone Clearance Wedge Wooden Guard Tooth Clamping Ring Anti-Stick Material(Strong)

  • Anti-stick type: All the matrix band are coated with Teflon non-stick material, which can prevent the matrix band from sticking to resin material during dental restoration, and make the filling resin surface smoother and reduce the adhesion of plaque..
  • Clamping ring:The design of the V-shaped clamping head can fix the two ends of the interdental space and make full contact with the wedge for more accurate positioning..
  • Ordinary matrix band: Made of super-elastic stainless steel, suitable for resin filling. The shape of the adjacent surface formed by the filling is closer to the physiological anatomy of the natural tooth, reducing Less overhangs, restore good contact points, thereby establishing correct adjacency to prevent food impact..
  • Subgingival matrix band: Extend the bottom on the basis of the conventional watercress forming sheet, suitable for repairing the defect close to the neck of the tooth..
  • Dental wedge: It is used to stabilize the forming sheet during the dental restoration process, close the gap of the gingival margin, and make the bottom of the forming sheet and the tooth. The body fits closely to improve the filling quality. The appropriate gap wedge can be selected according to the size of the tooth gap..
Check Stock

SIKA Sikaflex-221 Polyurethane Sealant/Adhesive, 10.1 fl. oz Cartridge, White (12)

  • Bonds well to a wide variety of substratesAreas of Application:.
  • Sikaflex-292i is suitable for structural joints in marine constructions which will be subjected to.
  • Good gap-filling propertiesCan be paintedBonds well to a wide variety of substratesWheelmark approvedSolvent-free.
Check Stock

Red Devil 0408 Duraguard Kitchen & Bath Siliconized Acrylic Caulk 10.1 oz Clear

  • 3 In 1 Caulking Tools+4 Pieces Sealant Finishing Tool:This set of upgraded tools can help you repair the gap and clean the residual glue, Improve....
  • Caulking Tools Two Mode Scrapers:Stainless Steel scraper remove stubborn old glue, Silicone Trowel to remove surface bumps and dents, It's an good....
  • Silicone Caulking Tool Save cost: The caulking tools are very easy to clean with a damp cloth and reuse, reduce the waste of sealant, no need for....
  • Caulk Remover -- Replaceable 5 Silicone Pads: The Caulking Tools was designed with Non-slip push-pull button, replace the 5 silicone pads which you....
  • Glass Glue Angle Scraper Wide Application and Good Service : The caulking tools can use for home, kitchen, bathroom, tank, window, sink joint and so....
Check Stock

Jetcoat Premium Driveway Sealer Asphalt Crack Filler and Sealant Perfect for Blacktop Repair 5 Year Protection

  • LONG-LASTING SEALANT - Fortified with sand for added filling, slip resistance, and durability, Jetcoat Premium Driveway Filler and Sealer is designed....
  • GREAT FOR MULTIPLE SURFACES - Use this extra strength driveway filler on all types of asphalt pavements and blacktop surfaces. Do not use on concrete....
  • READY TO USE - This sealant comes ready to fill and seal any blacktop surface. Simply stir the sealer to a uniform consistency and continue to stir....
  • EASY APPLICATION - With the pavement still damp, apply a uniform coat of sealer. To prevent cracking or tracking, avoid heavy or uneven application. A....
  • SECOND COAT FOR STRENGTH - A second coat of the sealant should be applied after the first coat has dried and is smooth to the touch, or within 24....
Check Stock

Gorilla 2 Part Epoxy, 5 Minute Set, .85 ounce Syringe, Clear

  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance.
  • Plenty of repositioning time for the perfect fit.
  • Separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses.
Check Stock

Butyl Sealant Tape, PROMOTOR Sealants Butyl Rubber Tape for Installing Car Part, Windows, Doors and Windshield etc.

  • Thickness: Approx. 9mm 0.35'' It will seal the gap between car door, car body, car hood, bed rail etc..
  • Rubber Sealant have super strong waterproof. Reduce the noise and wind when you drive your car at high speed..
  • Controlled compressability allows for easy installation. Ribbon sealer will not squeeze out, providing performance longevity..
  • Length is approx 4m 13ft. It can provide enough rubber re-sealing for two to three headlight assemblies..
  • Used to create a seal or deaden sound on all types of vehicles (Cars, RVs, Boats) and around the house (windows, screen doors, sky lights, vents) and is the perfect taillight and headlight sealant.
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

LLMOS 34pcs Caulking Tool Kit,3 in 1 Silicone Caulking Tools for Sealant Caulk Grout/Remover/Scraper Silicone Finishing for Kitchen Bathroom Window Sink Joint (Green)

  • 5 In 1 Caulking Tools+4 Pieces Sealant Finishing Tool, This set of upgraded tools can help you repair the gap and clean the residual glue, Improve the Agglutinating Quality and the Aesthetic Sense of Surface.
  • Plastic scraper remove stubborn old glue, Silicone Trowel to remove surface bumps and dents, Sliding switch design, easy to switch between trowel and scraper. It's a great tool for smoothing sealing lines, caulking lines. Finish to most silicone jobs, any edge, corner, joint.
  • Replaceable 5 Silicone Pads,The Caulking Tools was designed with Non-slip push-pull button, replace the 5 silicone pads which you want.
  • sealant finishing tool was made of durable plastic, easy to clean without wasting caulk.
  • And they are reusable with a long lifetime..
  • The caulking tools can use for home, kitchen, bathroom, window, sink joint and so on. Easy to clean with a damp cloth and reuse, reduce the waste of sealant, saves money and time..
Check Stock