ReviewsGap Gauge

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

  • ✔Feeler Gauge Sets: Including 65 manganese steel feeler with 32-blade and offset feeler gauge with 16-blade, made of 65 manganese steel, 65 manganese steel is more resistant to wear&tear and has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
  • ✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
  • ✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
  • ✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
  • ✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperati....
Check Stock

0.05-1.00mm Feeler Gauge Set, Stainless Steel Curved Feeler Gauge Measurement Tool, 16 Blade Offset Feeler Gauge Set, for Measuring Gap

  • STAINLESS STEEL FEELER GAUGE - This gauge is made of high quality stainless steel, durable and rust-resistant..
  • EASY READING - The size is clearly marked on gauge for convenient reading..
  • MEASURING RANGE - 0.05mm, 0.1mm, 0.15mm, 0.2mm, 0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, 0.55mm, 0.6mm, 0.7mm, 0.75mm, 0.8mm, 0.9mm, 1.0mm..
  • CONVENIENT TO CARRY - Simple structure, fine workmanship, convenient to use. Small size and easy to carry, you can simply keep it in your bag..
  • MAIN USE - It has high precision, widely used for measuring gap size and slot size..
Check Stock

5 Pack 10 Gauge 2 Pin Quick Disconnect Polarized Wire Harness SAE Connector Bullet Lead Cable for Motorcycle Boat Car Tractor - 12in Red and Black Wire (5PCS 12IN 10GAUGE)

  • Heavy Gauge SAE Wire Connector || The wire connectors are made of quality copper. 12in long, 10 gauge, 2 pin. Red and black wire. 5 pack in a package. Quick connectors..
  • Excellent 10 Awg Quick Disconnect 12V Waterproof Connector || Quick connect / disconnect, OEM design, perfect matching of bullet heads, no gap left after connecting, safe and reliable..
  • Solid 2 Pin Wire Connectors || Typically used with automotive, motorcycles, cars, trucks, bike, travel trailer, lawn motors, RV's, ATV, boats, inverters, amplifiers, solar panel hookups, solar chargers, LED light bar hookups, electric toy tractor,VHF radios, CB radios, marine radios, fish finders, installations of stereos, GPS, power winches, trickle chargers and other device..
  • 10 ga Quick Disconnect Audiopipe Polarized Wire Harness is a 10 gauge wire for high current applicatons, weather and moisture resistant. More durable than 12 gauge..
  • A 18-MONTH WARRANTY comes with the heavy gauge connectors. A longer time for you to enjoy the quality and service for return & refund. True worry-free shopping experience..
Check Stock

Rannb Plastic Feeler Gauge 0.05mm to 2mm Metric Gap Measuring Tool 20 Leaf

  • ⭐ Package Content - 1pcs x Feeler Gauge.
  • ⭐ Used for measuring of slot width, gap hole and etc..
  • ⭐ Each Leaf Size: 94mm/3.7" x 23mm/0.9" (Max.L x Max.W).
  • ⭐ Made of durable plastic.It is light weight and be easily carried in your pocket..
  • ⭐Metric sizes (mm): the 20 leaves feeler gauge owns 0.05mm/0.1mm/0.15mm/0.125mm//0.2mm/0.25mm/0.3mm/0.35mm/0.4mm/0.5mm/0.6mm/0.7mm/0.8mm/0.9mm/1mm/1.1mm/1.4mm/1.5mm/2.0mm.
Check Stock

USA Made - 25-Pack Waterproof Direct Bury Wire Cable Splice Kit 3M 18 to 10 AWG Low & High Voltage - 600V Max Landscape Lighting Irrigation & More 25 Pack

  • USA MADE - Filled with Water Proof Dow Corning SP4577 Dielectric Silicone.
  • Maximum Wire Gauge 10 AWG - Minimum Wire Gauge 18 AWG Features.
  • vIndustry Leading Volume Resistivity at 73°F (23°C): ohm­cm 2.17 x 1015.
  • Industry Leading Dielectric Strength, 50 mil gap volts/mil: >450.
Check Stock

Engine Timing Light with Feeler Gauge 32 Blades,Inductive Timing Light Gun Timing Light Ignition Testers Engine Ignition Coil Tester for Car Motor Vehicle Motorcycle Marine Lawnmower Measuring Gap

  • ...ables Easy Connect To Car's Engine Bay★ - Sensor Clips Cable length up to 4.41ft .Never worry about the length of the cable is not long enough.Adapts to all kinds of 12V battery for automobiles, motorcycles, ATVs, personal watercraft, RVs, boats, airplanes, golf carts, lawn mower, etc ..
  • ★ Stainless Steel Feeler Gauge As Bonus★ - Use feeler gauge to measure gap.This is flexible easy to get into all places. Blades are able to be together or can unscrew finger nut to take feeler out. 2 Different units of measuring: Dual marked metric and imperial, 0.0015 in/ 0.04 mm to 0.035 in/ 0.88 mm, the numbers of size are etched into feeler gauge for easy identification.Perfect for setting lifter, sparking plug, points gap etc. With anti-rust oil on feeler gauge to prevent rust..
Check Stock

CAMWAY Bent Feeler Gauge 16 Blade Feeler Gauge Imperial/Metric 45º Blades Offset Stainless Steel Feeler Gauge Measuring Tools for Measuring Gap

  • 45º Blades Offset,The stainless steel feeler gauge is used to measure the gap size..
  • Metric sizes (mm): Includes metric sizes 0.508, 0.127, 0.152, 0.178, 0.203, 0.229, 0.254, 0.279, 0.305, 0.330, 0.356, 0.381, 0.406, 0.432, 0.457, 0.483 mm.
  • Standard SAE(inch sizes): 0.020, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, and 0.019 inches.
  • Material:The Bent Feeler Gauge made of 65 manganese steel,high strength. Dimension(L x W x H):103.7x13x26.5 (mm),Weight:66.1g.
  • Scale clear, easy to use,Metal fastening screws, durable,Please don't put on the humid environment.There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty..
Check Stock

JBL Professional JRX212 Portable 2-way Sound Reinforcement Loudspeaker System, 12-Inch

  • JBL 12-Inch low frequency driver with a 2.5-Inch diameter edgewound ribbon voice coil which provides more cross-sectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling..
  • JBL 2414H-C 1-Inch polymer diaphragm compression driver improves high frequency performance as well as system reliability..
  • The advanced network topology crossover design shapes frequency response and delivers "coherent summation" in the crossover region..
  • High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating..
  • Non-resonant, all-steel handles are used..
  • Attractive 18-gauge hexagon perforated, steel grille protects components from damage.
  • Dual-angle pole-mount socket allows the speaker to tilt 10°for more uniform audience coverage..
Check Stock

Magswitch Extenda-Lift 600

  • 1-1/2 in. x 6 in. pipe wedge is ideal for medium jobs.
  • Steps: 1/16 in., 3/32 in., 1/8 in., 5/32 in., 3/16 in., 1/4 in..
  • Dual-use tool can be used as a wedge and a gauge..
  • Easy to handle for pull or push to make gap width adjustments..
  • Heavy-duty design can be used to scrape, poke, and prod weld to remove slag..
Check Stock

A664 Ground Plug Valve 1/8 in 30 Psi

  • Connects Fractional Tube (Interchangable with all major brands i.e..
  • STAINLESS STEEL PLUG VALVE/3K PSI - ONE PIECE - SUPERLOK PLUG VALVE.
Check Stock

Carrfan Car Panel Gap Alignment Gauge Simple Tool for Hood Measurement Scale in Millimetres

  • Applicable for car panel & hood gap measurement..
Check Stock