ReviewsGarage Puller Tool

Whisper Whistle Dent Puller,Car Dent Puller,2 Packs Suction Cup Dent Puller Handle Lifter, Dent Removal Kit and Dent Repair Puller for Car Dent Repair, Glass,Tiles, Granite Lifting and Objects Moving

...up is ergonomically designed and has the convenience of single stroke pump operation. One hand buckle design, precise structure, the pull strong and lasting, not easy deformation..
【Easy to use】Car dent removal tool is the ideal tool for moving flat objects in any home garage or professional body shop! Just put the dent puller suction cup lifter on a smooth object surface and pull the handle up, so easily move glass, tiles, objects and car dent repair..
【Warm reminder】Must be used on clean, smooth, flat, non-porous, dry surfaces. Always try to make sure there is good suction before lifting. When dealing with car dent, please make sure the dent is on a flat surface and the diameter should be large than the diameter of the bottom of the suction cup. Before using the suction cup, pour hot water at 80-100℃(176-212℉) on the dent area. After pouring the hot water, quickly place the suction cup on the dent of the car,and then pull it out horizontally..

Check Stock

XUMAKI Dent Puller Handle Lifter Car Dent Puller Suction Cup Dent Remover Tools Suction Cup Lifter for Car Dent Repair Glass,Tiles Mirror Granite Lifting and Objects Moving

【High quality】Suction cup puller handle and housing are made of aluminum alloy. The durable shell has higher hardness and longer service life, not....
【Unique design】Suction cup lifter is ergonomically designed and has the convenience of single stroke pump operation. One hand buckle design,....
【Easy to use】Suction cup lifter is the ideal tool for moving flat objects in any home garage or professional body shop! Just put the dent puller....
【Wide application】Suction cup puller lifter can firmly stick to any clean non-porous flat surface. It can move smooth flat object, such as the....
【Warm reminder】Must be used on clean, smooth, flat, non-porous, dry surfaces. Always try to make sure there is good suction before lifting.....

Check Stock

Kaisiking Black Aluminum Suction Cup Car Dent Puller Suction Cup Car Dent Remover Tools for Car Dent Repair, Glass, Tiles, Mirror, Granite Lifting and Objects Moving

...d buckle design, precise structure, the pull strong and lasting, not easy deformation. Durable aluminum handles and an impact-resistant housing to withstand work site abuse..
【Easy to Use】Car dent puller suction cup is the ideal tool for moving flat objects in any home garage or professional body shop! Just put the dent puller suction cup lifter on a smooth object surface and pull the handle up, so easily move glass, tiles, objects and car dent repair..
【Wide Application】Car dent removal tool can firmly stick to any clean non-porous flat surface. It can move smooth flat object, such as the glass, tiles, mirror, granite, car dent repair and so on. Please make sure that the dent are in the flat surface and should be larger than the bottom suction cup diameter.
【Warm Reminder】Must be used on clean, smooth, flat, non-porous, dry surfaces. Always try to make sure there is good suction before lifting. The suction cup dent puller and the small suction cup work together to repair the car dent. Kaisi Tools 30 Days Refund and Replacement Policy. If you have any question, please don't hesitate to contact us, we will get ba....

Check Stock

Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool

【No Damage To Walls & Copper & Supply Lines】This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
【Easy & Fast Remove】1.Remove the ....

Check Stock

CXGS Paintless Dent Repair Pull Tabs Removal Tool 8Pcs Aluminum Puller Glue Tabs with 5Pcs Plastic Glue Pulling Tabs Professional DIY Auto Body Dent Repair Small Dent Remover Kits for Car Dent Repair

.... Advantages of both: Plastic Tabs are more adhesion, Aluminum Tabs are more solid, which can be reused..
【Widely Use】The paintless dent repair tabs can save a lot of money for you compared with the auto body shops. This is a well-built dent popper for car that is the ideal tool for moving dent area in any home, garage, shop or professional body shop. Used for dent repairs of cars, refrigerators, motorcycle, washing machines, etc..
【How To Use】Clean the dent with a clean wet cloth, use the heat glue stick glue to the glue tab, then fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres, hold the glue tab with the lifter puller.(Note: the Hot Glue Gun & Glue not included.You need to buy these kits by yourself).
【Quality Customer Service】Our paintless glue puller tabs can help you repair dents fast by yourself for many times. Compatible with all glue puller devices: Dent lifter, Slide hammer & all puller tools. Contact us through Amazon for any quality questions, We will serve you within 12 hours whenever your issues..

Check Stock

OEMTOOLS 27059 Pilot Bearing Puller Attachment, Pilot Bearing and Bushing Removal, Fits 5/8” x 18” or 3/4” x 16” Threaded Rods , Black

EASY TO USE: The slide hammer bearing puller can be used in four steps: Insert the pilot bearing puller, turn the attachment housing expanding both jaws against the pilot bearing, attach a slide hammer, and use the slide hammer to remove the bearing.
SAVE MONEY: Getting a pilot bearing replaced in an auto shop could cost you up to $650.
You can save hundreds of dollars by using this one pilot puller.
VARIETY OF USES: Not only can this pilot bearing tool be used as a bearing puller, but it can also be used as a bushing tool on starters and generators.
This pilot bearing removal tool will also fit any 5/8” x 18” or 3/4” x 16” threaded rods.
DURABLE: Made from steel, this bearing and bushing removal tool can withstand years of regular pilot bearing jobs.
This blind hole bearing puller is built to last.
DIMENSIONS: This pilot bearing remover is easy to store anywhere at just 10.4" x 3.4" x 1.3". The blind bearing puller is also easy to wield, weighing in at just 13.6 ounces, making it a great pilot tool.

Check Stock

KELEN Blind Bearing Puller Tool, Blind Inner Internal Bearing Puller,Blind Hole Bearing Puller Set, Slide Hammer Removal Tool Set 5Pcs

The blind bearing puller is designed for removing out blind holes bushes and bearings from blind housings without any damage of your vehicles.You can do dent repair, lock pull or bearing pull on a scooter or any small machine..
Open clamps by turning handle clockwise to snug against the bearing for pulling out evenly without damage the parts..
Bearing Extractor Collets With Internal Capacity From 3/8 inches (10mm) To 1-1/4 inches (32mm),15 inches (382mm) Overall Length..
Blind bearing puller, blind hole bearing puller,blind inner internal bearing puller,inner bearing puller set,blind inner bearing puller set,blind bearing puller kit,blind bearing puller set,blind bearing puller tool,blind hole bearing puller set,blind hole bearing puller kit..
Includes puller/slide hammer, 4 adapters 12 - 32 mm and carry case.Ideal Replacement for pulling jobs.Satisfaction d. If not completely satisfied, return it to us for a no-hassle refund or credit..
Part number: Blind Bearing Puller Tool 5PCS.

Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....

Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..

Check Stock

Pipe Olive Remover Puller Tool, CATUDIY Olive Puller for Compression Sleeve Suitable for Brass Pipes Plumbing Tools with Diameters of 1/2 Inch & 3/4 Inches Ferrule (US Standard)

【Applicable Model】The compression sleeve puller not damage is suitable for brass pipes with diameters of 1/2 Inch and 3/4 Inch..
【Powerful Design】The ferrule puller tool is able to remove used or damaged olives from the copper pipe without damaging the pipe by utilizing compression fittings to lock the inches nut, olive puller can work on air-conditioning pipes.
【Ideal Removal Tools】The compression ring removal tool can increase torque, which is suitable for various tasks -- A handy duck puller tool to remove neatly used or damaged olives.
【Superior Material】This Olive puller for copper pipes fittings puller are made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life.
【Easy Using】The pipe tool can be used easily without checking any manual. Simple operation reduces frustration, saving more time and energy.

Check Stock

50PCS Dent Puller Rings Fit for Autos Spot Welding Car Body Equipment Gun Lifter Panel Pulling Washer Garage Metal Shrink Repair Tool

◎【Material】①Raw material: Copper ②Coated Stainless steel. ③Length: 55.5mm. ④Thickness:2mm.
◎【Description】①50x Dent Puller Rings For Spot Welding Welder Car Body Panel Pulling Washer Tool. ②spot weld straight dent pulling rings pads....
◎【Feature】①The Spot Gun need to be connected with the Dent Pulling Machine (Spot Welding Machine). ②Garage Spot Welding Machine Spotter Dent....
◎【Multifunction】①High Quality Accessories for Garage Spot Welding Machine. ②Useful for Car Body Repair, i.e. sheet metal dent repair. ③It....

Check Stock