ReviewsGarden Drill Bit Set

MAXCCINO Auger Drill Bit for Planting Set of 4, Garden Ground Earth Spiral Drill Bit for 3/8\ Hex Drive Drill, for Post Hole Digger Bulb Bedding Digging Plant Rapid Planter

  • HIGH EFFICIENCY: The planting auger for drill designed with new model upgraded bit and more blades on the shaft provide higher efficiency in garden..
  • SET OF 4: The garden augers come in 4 sizes, 1.6 x 8.6 inches, 3 x 12 inches,2 x 14.5 inches, 2.6 x 16.5 inches. The auger drill bit comes with 3/8 inch non-slip drive will be a better tool kit for digging holes in your yard..
  • EASY TO USE: Fit to any 3/8" chucked drill, 18V or greater drill recommended. Keep auger clean from soil and debris when not in use..
  • WIDE APPLICATION: Our four piece drill set is the best choice for increasing efficiency when planting bulbs, potted plants, vegetables, flowers, bare root trees and shrubs, tilling soil or planter boxes, mixing seed, soil, fertilizer, paint, or batches of mortar mix for hardscapes.
  • Our auger drill bit is also effortlessly dig post holes or even bring it on vacation to drill a hole in sand to anchor your beach umbrella. It will be a good helper for you..
  • BUY WITH CONFIDENCE: We offer a 2-year warranty service. If you have any question, please feel free to contact us..
Check Stock

2 Pack Garden Auger Drill Bit for Planting 4 D x12 L &1.6 D x9 L Heavy Duty All-in-One Design Auger Spiral Drill Bit for Planting Bulb Bedding Plants Drill Bit for 3/8 Hex Drive Drill

  • 【Easy to Use】Just fix the auger drill bit on the drill clamp of the garden auger to use, hold the electric drill with both hands for planting, and....
  • 【Say Goodbye to Backache and Hand Pain】No more blisters or hand pain.Allowing you more time to enjoy planting.The bulb auger for cordless drill....
  • 【Quality Material】Our drill auger is made of new PCM steel,which is rust-resistant and corrosion-resistant, upgraded as a one-piece design, the....
  • 【Wide Use】2 different sizes of garden auger spiral drill bit will meet your different planting needs in the planting season. The garden auger....
  • 【Cost-effective Set】Includes 4"x12"and 1.6"x9" garden hollow garden auger and 10 T-tabs（you can label with different names, planting dates,....
Check Stock

Homsky Garden Auger Drill Bit Sets with Garden Genie Gloves for Planting,Garden Plant Hole Digger Drill Bit for 3/8” Hex Drive Drill(Black)

  • ◆ MATERIAL: Digging machine drill made of high hardness alloys, high hardness, good wear resistance, can be used outdoors for a long time.
  • ◆ AUGER DRILL BIT FOR PLANTING :Garden bulb auger rapid planter for tulips, iris, bulbs, bedding plants, and seedlings. Also great for digging weeds up by the roots.
  • ◆ EASY TO USE: Will work with any 3/8″ or chucked drill, 18V or greater drill recommended.for cordless drills a minimum 14V drill is recommended, Keep auger drill bit clean from soil and debris when not in use.
  • ◆ INCLOUD:1 x 3″ Dia x 12″ L spiral drill bit.
  • ◆WORK DONE QUICKLY: The garden hole digger can drill hundreds of holes in a few minutes. Compared to a trowel or small shovel farming, it can be done faster.
  • 1 x 1.6″ Dia x 9″ L spiral drill bit, 1 x garden genie gloves.
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock

Power Planter Large Bulb Auger- 4"x28" Drill Bit Hole Digger for Post Hole Diggers, Digging Holes- Bulb Planter Tool- Auger Drill for Planting- Garden Auger Digging Tool- 1/2" Non-Slip Hex Drive

  • POWERFUL GARDEN DRILL AUGER: Our garden-digging tool is designed as an alternative to post-hole diggers, bulb planters, or shovels for digging holes. Our garden drill bit auger's effective design can help you speed up your outdoor planting time much more efficiently than a traditional post-hole digger..
  • MULTIFACETED TOOL: Our specially designed auger drill bit is perfect for various home projects, municipalities, theme parks, playgrounds, and the like. Use our drill attachment to mix paint, fertilizer, or mortar. You can also use it as a shovel alternative or garden auger drill bit for planting anything from small vegetables to larger shrubs by reaming out the hole. Our drill is also a great alternative to your gardening hand bulb planter..
  • IDEAL FOR ANY SOIL TYPE: Our patent-pending ground-hole auger bit is effective for drilling into dirt, clay, rocky soil, and sand. This flexible drill bit has been designed to leave a small amount of loose soil in the bottom of a hole to help a new plant start growing and reduce transplant shock..
  • EASY TO USE: Our auger bit features a 1/2-inch non-slip hex drive that can fit most cordless drills. Tighten the drill chuck to secure the auger, and you're ready to dig. This drill bit auger for planting is perfect for pro....
Check Stock

NUNGT 3PCS Auger Drill Bit Set for Planting, Bulb Planting Auger for Drill, Garden Auger Spiral Drill Bit, Auger Umbrella or Post Hole Digger for 3/8 inch Hex Drive Drill

  • ...er drill bit set is wear-resistant, sturdy and durable, Maintain excellent performance for a long time in working with hard dirt, clay, rocky soil, sand, etc. It works with any 3/8" or larger chucked drill, and we suggest that use 18V or greater drill with adjustable drill chuck..
  • 【EFFICIENT AND TIME-SAVING】 The garden spiral hole drill planter adapt to dig holes and loosen the soil, it 's more efficient compared with traditional shoves, saving you a lot of time and energy. The auger drill bit for planting can protect your knees and back because you don't have to kneel down or bend over to drill like before, make you work easier..
  • 【VARIOUS APPLICATIONS】 The auger post hole digger not only widely used for planting bulbs, potted plants, vegetables, flowers, bare-rooted trees and shrubs, fence posts, mixed seeds, fertilizers and paints. It's also used to drill holes in the sand to secure beach umbrellas, drill holes for fixing tents when camping, drill ice holes for fishing..
  • 【WHAT YOU GET】 Contain 10 pcs plant labels and 3 different size drill bits. 1.6”x 9” for drilling holes to install smaller plant stakes and ventilate the roots.
  • 3”x 12” for horizontal drilling, mixing paint, cement.
  • 4"x 16" for setting smaller fence posts or planti....
Check Stock

FTG USA Wood Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4#6#8#10#12 Countersink Bit for Woodworking, Tapered Drill Bits Secured with Pin to Hex Shank, 2 Stop Collar, 1 Allen Wrench

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 5 Pc Countersink Drill Bit #4 6 8 10 12 Tapered Drill Bits Secured with Pin to 1/4 Hex Shank 1 Allen Wrench Counter Sinker Drill Bit Set for Woodworking

  • FTG 2337P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • FTG BITS SECURED with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable w....
Check Stock

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • Countersink drill bit set for wood with tapered drill bit , 4 Flute countersink cutter #45 Carbon Steel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits desi....
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock