ReviewsGas Can Spout Replacement Old Style

19 pcs Gas Can Spout Replacement Set, Gas Can Nozzle 5 Gal ,3 Bendable Tubes,3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 Threaded caps ,6 Vent Caps 1 Drill Lid

  • 19 pcsGas can spout replacement ,Suitable for most 1/2/5/10 gal gas cans,6 * screw collar caps are all 1.75inch, 3 of them are coarse threads and the other 3 are fine threads. Please check your gas can outside thread diameter before you make this purchase,as Can Spout Kit for 1/2/5/10 Gal Replacement of Old Tanks.
  • HIGH QUALITY: these gas can spout are made of HDPE plastic(same as 10 5 gallon gas can plastic), which are bendable and durable. thicker and widened rubber gaskets, can better fit the gasoline container, longer service life,Safe without leakage.
  • Simple to install: 3 Bendable tubes,3 Screw Collar Coarse Thread &3 Fine Thread-Fits Most of The Cans,3 threaded caps for tube,6 Vent Caps 1 drill Lid has Thick Rubber pad,Please feel free to contact us for installation problems, we will solve it for you as soon as possible.
  • The spout cap tube and The spout are threaded, every the spout cap has a thick rubber sealing ring inside. as long as you tighten the nozzle cap. No oil spills, even in the case of transport or a tank topped down..
  • We offer two types of gas con vent caps,one is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use.another is used for another oi....
Check Stock

ORANDESIGNE Gas Can Spout 5 Gal Replacement Old Style Fuel Can Nozzle Kit with Screw Cap Collar Stopper Cap Gaskets Rear Vent Cap for Gott Rubbermaid Essence Some RotopaX Container(6)

  • 【High Quality】 – Made of high strength ABS plastic for long time use,gas can spout is 8-1/2″ Long w/ Gasket approximately 1-1/2″.
  • 【 Safety & No Spillage 】: Simple to use and pours the liquid without gurgling and gasping for driping everywhere.
  • 【 Update Old Cans 】: Perfect replacement for the cracked original spout, help you keep your old gas container instead of buying a new one.
  • 【 Fuel Easier & Faster 】: Flexible design for much easier to fuel hard to reach spot, included vent caps for much faster to fuel.
  • 【 **IMPORTANT** 】: Gott / Rubbermaid Gas Spouts Part Replacement #706. Fits on Gott / Rubbermaid / Rubbermaid Essence Old Style Plastic Can Models #’s 1261 1251 1226 1228 1221 AND ON MODELS 1225 1250(Can with FINE THREAD Collar cap).
Check Stock

Gas Can Spout Replacement 5 Gal (4 Pack) Gas Can Nozzle For Blitz Old Style Gas Cans, Includes Nozzles, Caps and Vent Caps

  • COMPLETE BLITZ GAS CAN SPOUT REPLACeMENT KIT. This kit includes 4 replacement nozzles, 4 gas can vent caps, and 4 no spill gas can nozzle caps. Best replacement gas can spout new and older style Blitz gas cans..
  • REPLACEMENT THE HASSLE OF NO SPILL SPOUTS These easy pour gas can spouts are made to replace the clunky no spill spouts that are often difficult to use, along with old, outdated, and worn Blitz gas can nozzles..
  • LEAK PROOF DESIGN. Made from high quality high-grade plastic, extra thick gaskets, thread base rings, and secure locking nozzle tips making these leak proof when being handled or transported..
  • STRONG SOLID NOZZLES FOR STRENGTH DURABILITY WHEN FILLING ANY MACHINE. These convenient pour nozzles are solid and sturdy enough to rest directly onto the fuel filler tube of and gas tank minimizing messy spills and fatigue..
  • WE STAND BY OUR PRODUCT. At Super Spouts we always stand by the quality and function of our products, are based in the USA, and back every purchase with a no questions asked money back guarantee..
Check Stock

Replacement Gas Can Spout Vent Kit for Older Style Can with Flexible Fuel Nozzle Rubber Gasket Threaded Vent Cap Drill Bits Compatible with Gott Scepter Rotopax and Kolpin Most of Plastic Container Jug 1 2 5 10 Gallon

  • Gas can spouts are made of high strength ABS plastic, filling nozzle(8.07 inch long) are translucent that you can see the gas flowing through by color change.
  • Fuel tank spout is flexible can be bended up to 90 degree make gas/water easily flows outt.
  • Fuel can nozzle can be stored inside or in normal use position that convenient to transport and use.
  • Replacement Gas Can Nozzle Kit come with 3 types of vent cap that compatible with most of older and new style fuel can, it takes the vacuum effect away and allows continuous flow for faster pouring.
  • Gas can spout replacement and vent kit for most 1/2/5/10 gallon gas can and kettles, update your old cans instead of buying a new one.
  • Each kit includes: (1) Filler nozzle, (1) spout cap with Lanyard, (1) "O" ring gasket, (2) base caps, (1) yellow push-in vent cap,(1)black rear vent cap,(1)metal vent cap with install tool. 3 Kits included.
Check Stock

Lisle 19702 Dispenser with Lid and Cap - 8 Quart Capacity,Grey

  • ...k them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focused on providing a wide range of gas can spouts and other components. Meant to be compatible with most all cans, one of our most sought-after products is the EZ-Pour Replacement Gas Can Spouts..
Check Stock

3 Sets of Replacement Gas Can Fuel Spout Cap Kit Garden Industrial Machinery Refuel Tool(1L)

  • Package: You will receive 12 piece of gas cans spout gaskets. Note: Gas Can and Spout Not Included. Gas cans spout gaskets fits most standard plastic jerry can spouts..
  • Materials: High Quality Rubber last for years, which is durable and sturdy, non-rusting, corrosion-resistant, flexible and not easy to break or split, easy to install and use..
  • Perfect replacement gasket: When tightening the dispenser back onto the can, you can start to feel the resistance of the new o-ring long before that of the old o-ring and the new thickness gives you confidence to tighten it to your heart's content..
  • Size: Check out the product photos for product dimensions to compare to your existing gasket/gas can spout to quickly bring your gas can back to its new condition..
  • Will it fit my gas can: Remember, the inside seal diameter will stretch slightly to create a secure fit onto your gas can spout..
Check Stock

KP KOOL PRODUCTS Gas Can Cap - Solid Base Gas can Cap Replacement (1-Coarse and 1-Fine Thread) - Fits Most 1/2/3/5 Gallon Gas can - caps are 1-3/4\. Please Check Your can Dimensions Before You Buy

  • These Caps Will Fit Most of The Cans. The inside diameter of both the caps are 1-3/4"inch. Please check the dimensions and buy accordingly. This gas caps for gas cans will not fit if your cans have different size opening.
  • It Contains 1 Black (Fine Thread) and 1 Yellow (Coarse Thread) which fits most 1/2/5/10 gallon gas cans, gas can cap spout replacement old style. NO CALIPER INCLUDED.
  • Gas can cap gasket: using high-quality materials, wider and thicker gas can cap seal, better fit the cap, gas can cap no spill, can effectively prevent the liquid from overflowing in the process of transportation..
  • This gas can caps Are Made of Very Fine Quality BPA Free Plastic And Will Hold Up To Years of Activity..
  • KOOL PRODUCTS Spout Kits and Caps are very Popular and Number One Seller in North America..
  • KOOL PRODUCTS Replacement Solid Base Cap Yellow and Black to Update Your Old Cans.
Check Stock

EZ-POUR Replacement Spout - Water Jug Or Gas Can Spout - Update Your Old Can

  • ...k them up. Yes, that includes the vents and screw caps. These spouts are great and will work on most cans..
  • Made From Extra Dense Material - We are focused on providing a wide range of gas can spouts and other components. Meant to be compatible with most all cans, one of our most sought-after products is the EZ-Pour Replacement Gas Can Spouts..
Check Stock

CM Concepts Gas/Liquid Can Replacement Long Spout & Vent Kit-Ultimate Package

  • Gas Can Spout Replacement kit,Suitable for most 1/2/5/10 gallon oil cans, We provide 12 threaded collar caps 6 Coarse Thread & 6 Fine Thread . As shown in the picture The internal thread size is 1-3/4--1.7in , It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking.Thicker and widened rubber gaskets,Can better fit the bottle cap,Prevent liquid leakage when refueling..
  • Anti-overflow design,(Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, we provide two oil cans with vent caps,(gas con vent caps-A is used for oil cans without a vent at the end of the oil can,All you need is a simple drilling and installation and you are ready to use.) (gas con vent caps-B is used for another oil can with a vent cap at the tail , Can replace old vent caps.).
Check Stock

ORANDESIGNE 4 Gas Can Spout Replacement Kit Gasket Stopper Cap for Gott Rubbermain Essence Blitz Igloo Midwest Eagle Scepter RotopaX Kolpin Fuel Diesel Kerosene Water Jugs Using Your Existing Collar

  • 【High Quality】 - Made of high strength ABS plastic for long time use, gas can spout is 8-1/2" Long w/ Gasket approximately 1-1/2".
  • 【Upgrade Old Cans】 - Perfect Pour Spout Replacement to fix broken gas cans, help you keep your old gas container instead of having to buy a new....
  • 【Ended Spilling】- Simple to use and doesn’t drip gas everywhere,never spill gas all over yourself and your equipment again,Fuel saving at the....
  • 【Muti-Use】 - Flexible fuel can nozzle can widely used on many fuel cans for industrial machinery refuel, garden machinery refuel, car refuel, ATV....
  • 【FIT BRAND】 - GAS SPOUT & STOPPER CAP" is quite universal will work with most Plastic Gas Cans & Jugs like Midwest, Eagle, Gott, Rubbermain,....
Check Stock

Gas Can Spout Replacement Improved Design Flexible Pour Nozzle Kit with Gasket Stopper Vent Cap Collar Caps for Old Style Water Gas Container Jug Pack of 3

  • Gas Can Spout Replacement, Suitable for most 1/2/5/10 gal oil cans, We provide 4 threaded collar caps 2 Coarse Thread &2 Fine Thread. As shown in the picture The internal thread size is 1-3/4--1.7in, It can only be used for gas tanks with a tank mouth size of 1.75in. Please measure your oil tank mouth size before purchasing. The newly upgraded coarse thread gas can spout cap reduces the cap height to ensures that the cap can be completely sealed..
  • High-quality materials, These gas can nozzle replacement parts are made of high-quality HDPE materials,In use, you can bend freely without breaking. Thicker and widened rubber gaskets, Can better fit the bottle cap, Prevent liquid leakage when refueling..
  • Anti-overflow design, (Special Attention: As shown in the figure, the screw cap of the gas con spout cap is hexagonal)The spout tube and the spout cap are threaded, and the spout cap has a rubber sealing ring inside. Tighten the spout cap after use. There will be no oil overflow even in the case of transportation or the tank is down..
  • Can cover more oil cans, We offer two types of gas can vent caps, (Gas Can Vent Caps-A) is used for oil cans without a vent at the end of the oil can, All you need is a simple drilling and installation and ready to use. (Gas Can....
Check Stock