ReviewsGas Connector

Home use Soda Stream Refill Bottle CO2 Cylinder Cartridges, CGA320 Adapter Refills Connector Kit to TR21.4, Thread Set Replacement Accessories for Soda stream Machine Tank (Brass) (Gold)

  • 【Specifics】CO2 Refill Adapter with 4 pcs Big Gasket and 4 pcs Small Gasket（no pin）, no gas leakage when connected to the cylinder, good sealing performance. This adapter cylinder will enable you to fill CO2 from your larger bulk cylinder into smaller soda cylinders..
  • 【Material】We used premium brass material to ensure a long lifetime and as well as strong durability under constant usage. After thousands of experiments, we designed this adapter for refilling CO2 into the tank..
  • 【Widely Applicable】This CO2 refill adapter can be used with larger CO2 tanks with CGA320 connector (US CGA-320/0.825-14NGO/G1/2-1), The Soda Bottle Adapter works with large CO2 tank with CGA320 connector or W21.8-14 connector CO2 tank..
  • 【Easy Operation】CO2 refill connector kit is very easy to use , the adapter is easy to screw with the empty CO2 gas cylinder.It is durable and wear-resistant ,nor fall apart in daily use. The refill adapter is a high-quality, reliable, and rust-free operation..
  • 【Quality Guarantee】Money Back or Replace a new Connector Adapter Accessory if there is any problem with the soda connector..
Check Stock

KitchenAid 710-0003 Natural Gas Hose and Regulator for Gas Grill Conversion

  • This product is a Natural Gas unit and you must have Natural Gas plumbed out to your patio or deck to be able to use this grill.
  • Converts your dual-gas propane grill to natural gas.
  • Converts these KitchenAid grill models to NG: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A, 720-0745B, 720-0787,....
  • Includes: (1) 10 ft. natural gas hose with quick connector, (1) natural gas regulator, (1) 5.9 in. NG regulator hose, (1) 6 mm wrench, (1) 6 mm nut....
  • Tools needed for installation not included: adjustable wrench, pliers, Phillips screwdriver, pipe wrench, flathead screwdriver, 6 mm socket wrench,....
Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

  • ...the gas fed to the burners. A common issue when the oven fails to ignite is a faulty glow bar. If the oven does not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
  • Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Check Stock

Manometer, 12 Selectable Units Differential Pressure Gauge, Dual-Port Manometer Gas Pressure Tester, Digital Pressure Gauge with Backlight, Professional Air Pressure Meter, Handheld HVAC Manometer

  • ...ration, gas pressure system troubleshooting, laboratory testing, maintenance and installation of blowers, clean rooms, boilers and other gas appliances..
  • 【Differential Pressure Gauge with 12 Selectable Units】The length of the two hoses in the gas pressure gauge set is 25cm.
  • The thread size of the barb metal connector is 1/8 inch.
  • 12 optional units (mmHg, inHg, ftH₂O, cmH₂O, inH₂O, Pa, KPa, mbar, bar, psi, Kgcm² and ozin²).
  • 【Manometer for Measuring Positive and Negative Pressure】There are two ports on the top of the differential pressure meter, one for testing positive pressure and the other for testing negative pressure. You can select any port to test the pressure difference (P1-P2) between the two areas. Using the single pipe connector of the air pressure meter, you can quickly measure the current pressure value (relative to the current atmospheric pressure)..
  • 【Digital Manometer with Data Recording & Holding Function】Gas manometer data storage: 100 groups.
  • the user-friendly design of the manometer gas pressure tester recording test data function is convenient for users to view after testing.
  • automatic shutdown: no operation after about 15 minutes.
  • low battery reminder: ≤6.8V 【Note】Battery: 1* 6F22, 9V, 250mAh (not includ....
Check Stock

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

  • ... between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
  • EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
  • UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E-210/E-310 etc.and most of Chari-broil gas grill with side burner.
  • Dyna-Glo dgp350snp-d, mfa350bnp/mfa350cnp ge530bsp-d,dge486ssp-d,dge486gsp-d etc. and most of Brinkmann gas gril.
  • Uniflame GBC873W-C,GBC873W,GBC940WIR,GBC940WIR-C,GBC976W,GBC956W1-C,GBC1076WE-C etc. and most of Kenmore gas grills..
  • A MUST-HAVE BBQ HEATER REPLACEMENT. No tools required and easy to install with handheld grip for tightening. Great for using gas grill, heater, smoker, camp stove, lantern, tabletop grill, Fire pit Ta....
Check Stock

Atwood/Hydroflame 33521MC Ignition Board

  • DUAL SENSE - Flame sense works through high voltage connector and edge connector simultaneously.
  • EXTERNAL SENSE -Connector on the board for external sense wire.
  • DIAGNOSTIC-AID LED on board is green to show power to board.
  • VOLTAGE REGULATOR -Cleans up the 12 Volt supply power.
Check Stock

Forney 85654 TIG Torch for Forney Multi-Process Welders fits Forney 322 & 324

  • DESIGNED FOR FORNEY- Air cooled size 17FV single-piece torch and consumables. Uses 7 pin connector designed For Forney MP style machines.
  • FUNCTIONAL- Integrated gas line with valve on handle. When using this torch, amperage is controlled locally on the machine and the trigger is on/off. An optional foot pedal will allow control of amperage remotely.
  • POWERFUL AND DURABLE- 150 Amp capacity. Electrode range: .020 - 3/32" (0.5-2.4mm). Compatible with 200 Amp and under machines with a size 25 Dinse connection.
  • INCLUDES- 12.5' torch with 1/8" collet and tungsten electrode, size #7 nozzle, 5/8" connector, and 36" gas hose..
Check Stock

Bond Manufacturing 52066 65,000 BTU Natural Gas Conversion Kit Gray

  • All the components your licensed professional will need to connect your 65,000 BTU Fire Table to your natural gas line.
  • Contents include: a 10 ft natural gas hose, 2 sets of quick disconnect devices, one connector, one gas valve with microswitch, 1 clamp (burner air....
  • Instruction Manual included for your licensed professional’s reference.
Check Stock

Highcraft GUHDZD3436Q 36 Flexible Yellow Epoxy Coated Gas Line Connector with 1 O.D and 3/4 FIP x 3/4 MIP Fittings Stainless Steel

  • High BTU Gas Connector with 1" Outer Diameter.
  • 36" Long with 3/4" FIP x 3/4" MIP Fittings.
  • Designed and Engineered for Safe, Optimal Flow Rate.
  • FLEXSHIELD Epoxy Coating Provides Extra Corrosion Protection of Stainless Steel 304.
  • For Extra High Demand Appliances, Such as Tankless and Commercial Water Heaters.
Check Stock

BrassCraft PSC1083 K5 Safety Plus Gas Installation Kit for Range Furnace and Boiler

  • 5/8 In. OD x 48 in. length corrugated stainless-steel gas connector with ProCoat coating to withstand prolonged exposure to harsh household chemicals.
  • Safety+PLUS Excess Flow Valve protects against gas fires and explosions - 3/4 In. MIP (with 1/2In. FIP tap) connection to gas supply or gas ball valve.
  • Includes multiple steel fittings to fit most gas appliance inlets: 1/2In. MIP (with 3/8In. FIP Tap) fitting & 3/4In. MIP (with 1/2In. FIP Tap) fitting.
  • Fits all current and most older five to six burner ranges, furnaces and boilers.
  • Temperature rating: 32 Degree to 150 Degree F. Pressure rating: 1/2 psi certified.
Check Stock

AJinTeby Gas Grill 5430 Regulator Replacement for Coleman Propane Stove Not Fit for Coleman Roadtrip LXE Grills

  • Regulator only fit for Coleman Triton Portable Propane Gas Camp Stove, Classic Camp Stove with 2 Burners, Fold N Go Stoves Coleman Classic Propane....
  • Propane Grill Connector: Premium low-pressure propane grill regulator. Gas Grill 5430 Regulator Replacement for Coleman Propane Stove.
  • Easy Installation - The stove regulator replacement is easy to install and operate. This replacement propane gas regulator keep your stoves running....
  • Great Replacement - Made of stainless steel and solid brass, it is sturdy, long-lasting. This propane gas regulator maintains steady propane gas....
  • Check the user manual of your Coleman stove to see if it is compatible with this gas stove regulator. Note: NOT fit for Coleman Roadtrip LXE Grills..
Check Stock