ReviewsGas Cylinder Valves

Office Chair Gas Lift Cylinder-Office Chair Replacement Parts, Heavy-Duty Gas Lift Cylinder Fits Most Chairs,Highest End Class 4 Hydraulic Pneumatic Piston,Universal Size

  • STANDARD SIZE OFFICE CHAIR CYLINDERS REPLACeMENT: This chair cylinder replacement will fit all office chair bases with 50mm(2 inches) standard centre hole. Ideal to replace hydraulic piston on 99% standard office chairs, task chairs, executive chairs, salon chairs and rolling stools on the market. SAVE MONEY - to fix your sinking office chair by replacing the chair gas cylinder instead of spending hundred bucks for a brand new computer chair. ( Please measure dimensions before purchasing ).
  • HEAVY DUTY CLASS 4 PISTON - STRONGEST ON THE MARKET: Our gas lift cylinder passed the top-level test of BIFMA and TUV certification, the highest End Class 4 chair piston on market, which are known as the most durable, longest lasting, and highest quality gas lift cylinders, they can lift up and down 120,000 times without fail and can be support up to 1000lbs..
  • 4.7’’ PISTON STROKE FOR ADJUSTING CHAIR HEIGHT: This chair piston extends from 264mm to 385mm ( 10.39 - 15.15"), minimum length: 10.39 inches.
  • maximum length when fully extended: 15.15 inches, travel from the highest to the lowest point, replace your office chair gas cylinder and stop worrying about disturbing anyone, 360 degree rotation to all directions, freely lift and rotate your office chair....
Check Stock

HPDMC Oil-Free Hookah Dive System Third Lung Serface Vacuum Pump for Snorkeling (550W)

  • Voltage: 12V storage battery drive（battery is not included）, Power: 550W, Working Pressure: 0.8MPa / 8bar / 110psi, Flow Charging Rate: 60L/min.
  • 2.0cfm, Type: Oil-free pump, no need any lubricate oil to take in, Receiver tank: 10 liters stainless steel..
  • Working process: Atmosphere air is sucked into cylinder of the compressor, and compressed to reach 0.3mpa – 0.8mPa / 40 psi – 110 psi pressure, through regulator with water separator , then purified by filter. Discharge clean air for diving breathing..
  • Filtration for breathing air (Active carbon filter): The outlet air purification depends on the activated carbon and molecular sieve, so filter elements must be replaced periodically, especially for breathe purpose. The deepest working distance is up to 30 meters for one hose.
  • 10-15 meters for both if connects to two hoses..
  • Direct driven type compressor: This air compressor is the main body of the electromechanical air source device. It is the device that converts the mechanical energy of the primary motion (usually the motor) into the gas pressure energy, and is the pressure generating device for compressed air. The pump block unit is composed of crankcase, crankshaft, cylinder, piston, intake and discharge valves, connect rod , beari....
Check Stock

WINMAX TOOLS AUTOMOTIVE Generic Tu-21 Cylinder Leakage Leakdown Leak Detector Engine Compression Tester Gauges

  • Designed to detect a variety of common engine faults including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
  • Available with either single gauge or twin gauge manifold. Gauge(s) show % of cylinder leakage or cylinder leakage and cylinder pressure..
  • Suitable for use on any petrol engine with 12 and 14mm spark plugs..
  • TU-21 Cylinder Leak Detector Tester checks the amount of leakage in an engine cylinder & helps determine the source. Best used when comparing a....
  • Pinpoint the source of compression problems by doing cylinder leak-down tests Works with domestic and import engines Input and leakage gauges with....
Check Stock

DAJAVE 2 Pack 5.5 Inch Office Chair Cylinder Replacement, Office Chair Gas Lift Cylinder, Hydraulic Pneumatic Shock Piston Heavy Duty(1000lbs) Universal Size Fits Most Executive Chairs

  • [2Pcs Gas Lift Cylinders] You will get 2 office chair cylinder replacement to fix your sinking office chair by replacing the cylinder instead of spending hundred bucks for a new computer chair.
  • This hydraulic piston is suitable for almost all office chairs (salon chairs, work chairs, executive chairs, rolling stools)..
  • [1000lbs Office Chair Cylinder] The office chair piston maximum weight it supports is 1000Lbs, which is much heavier than an ordinary gas cylinder for office chair..
  • [11.8" to 17.4" Long Adjustable Gas Lift Cylinder] Minimum length: 11.8 inches.
  • maximum length when fully extended: 17.4 inches.
  • adjustable range: 5.5 inches, Load capacity: 1000lbs.
  • Office Chair Cylinder Replacement: Full 360 degree rotation, smooth and noiseless movements to all directions. You can use this chair cylinder replacement for your office chair, gaming chair, desk chair and swivel chair etc..
  • Easy To install: This office chair cylinder is relatively simple to install,and can be installed easily with no additional screws required..
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hond-a Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hond-a Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hond-a Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hond-a Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hond-a engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

Fuel Tank 116gl Gas

  • ...s in truck or service vehicle. This Product are designed exclusively for the heavy duty needs of the mechanic shop, livestock operation and service truck. The two stage, cast iron, industrial air compressors work hard for serious industrial auto body and agricultural use.Equipped with an iron construction with cast cylinder sleeves, this pump head is designed for a long time use and is easy for maintenance..
  • 【Standard Warranty】HPDAVV provided with one-year warranty,the air end with two-year warranty and lifetime maintenance. We also have some of the best air supplier are able to support the after-sales services.
Check Stock

Searon Digital Tach Hour Meter Tachometer RPM Counter for Snowmobile Skis Motor Bike Go Kart Lawn Mower

  • Inductive Tach/Hour Meter -- This digital Tach Hour Meter Tachometer will keep track of engine RPMs and running time for RC Toys, PWC, ATV, Motorcycles, Marine Engines, Chain Saws, Tractors, Lawnmowers and Gas Powered Engines..
  • Read RPM -- Read RPM when engine is started. When engine is off, display total run time of engine and remains visible.
  • Accumulate Total Hours -- Accumulate Non-resettable total run time of operation, Total time reads up to 999,99 Hours.
  • Works With -- 4 Stroke 1 Cylinder / 4 Stroke 2 Cylinder / 4 Stroke 4 Cylinder / 4 Stroke 6 Cylinder / 4 Stroke 8 Cylinder / 4 Stroke 12 Cylinder / 4 Stroke 16 Cylinder / 2 Stroke 1 Cylinder / 2 Stroke 2 Cylinder / 2 Stroke 3 Cylinder / 2 Stroke 4 Cylinder/ 2 Stroke 6 Cylinder Gas Powered Engines.
  • 2-Year Warranty -- Searon warrants that for a period of 2 YEARS from time of purchase. within 2 years, any issue with this Generator hour meter Tachometer Inductive, it will be full refund without return, as long as you contact us timely..
Check Stock

BTSHUB Tu-21 Cylinder Leak Down Tester Kit Dual Pressure Gauges Gasoline Engine Leakage Detector with 10 12 14mm Spark Plugs

  • The cylinder leakage test gauge Kit is designed to detect common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and....
  • Available with either single gauge shows % of cylinder leakage, or twin gauge manifold show cylinder leakage and cylinder pressure. Suitable for any....
  • Dual pressure gauges: 1 Cylinder pressure gauge, 1 Cylinder leakage gauge. Features a 19" long rubber nylon resin hose with quick coupler on the....
  • 3 sizes adapters: Brass coated aluminum adapters, 14mm(fixed on a 10" long hose), aluminum 12mm and 10mm (both can be connected to 14mm adapter), help....
  • Ideal for testing trucks & late model cars where clearance is minimal. Please note: This cylinder leak tester is not suitable for shallow cylinder..
Check Stock

Office Owl Office Chair Cylinder Replacement Super Bundle (Includes Removal Tool, Gloves an Instructions) Universal Size Heavy Duty Gas Cylinder for Office Chairs. Pneumatic Piston/Hydraulic Piston

  • ✅WHAT’S INSIDE YOUR OFFICE CHAIR CYLINDER SUPER BUNDLE? ! We included literally EVERYTHING you need to replace your office chair gas cylinder easily, quickly and painlessly! Featuring: Printed STEP BY STEP INSTRUCTIONS, premium GLOVES for gripping the cylinder and keeping your hands grease free, and a REMOVAL TOOL for effortless removal of the old cylinder. We included everything you need to revive your ageing office chair!.
  • ✅BREATHE NEW LIFE INTO YOUR OLD CHAIR : If your office chair starts sinking, SAVE MONEY by purchasing our office chair cylinder instead of spending money on a brand new chair! This purchase makes total sense, and comes with everything you need for a painless replacement! Backed by our money back guarantee, there is no reason NOT to make this purchase!.
  • ✅UNIVERSAL SIZE GAS LIFT: Our office chair cylinder replacement will fit just about any office chair including popular brands such as Herman Miller, Hon and Amazon Basics! If for some odd reason it doesn’t fit your specific office chair, return it for a no questions asked refund and we will even pay for the return shipping. You have nothing to lose!.
  • ✅SUPER HEAVY DUTY CLASS 4 CYLINDER! Our pneumatic piston replacement cylinder is class 4 – the highest qu....
Check Stock

15810-RKB-J01 Vtec Solenoid Spool Valve with Gasket for 2005-2007 Hon-da Pilot Accord Odyssey 2.4L 3.0L 3.5L 15810RKBJ01

  • Reference OEM Number: 15810-RKB-J01. Please check the part number on your old part housing before purchase. Only part number is the unique ID..
  • Application Vehicle: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • Application Vehicle: 2006 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Accord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Odyssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate alternate lobes on the camshaft and c....
Check Stock

99.999% by Volume Nitrogen Calibration Gas, 17 Liter Steel Cylinder.

  • WIDE RANGE OF COMPATIBILITY: Most calibration accessories are designed for use with more than one instrument. Calibration cylinders are also conveniently compatible for use with the GALAXY GX2 Test System so they fit easily with other components and ensure a comprehensive safety evaluation.
  • MULTI-GAS TANK: The calibration gases within the cylinder are 1.45 % CH4 (Methane), 15% O2 (Oxygen), 60 PPM CO (Carbon Monoxide), 20 PPM H2S (Hydrogen Sulfide).
  • RECYCLABLE CYLINDER: MSA promotes recycling of Model R, Model RP, and Econo-Cal Calibration Cylinders. The calibration gas recycling program benefits a non-profit organization where cylinders are not refilled.
  • they are salvaged for scrap. Simple recycling instructions are included with every eligible cylinder..
  • RFID-TAGGED FOR EASY TRACKING: RFID technology and software offer convenient setup, recordkeeping, automatic calibration cylinder recognition, cylinder pressure, expiration warnings, and status of multiple cylinders simultaneously.
  • SAFETY & COMPLIANCE: All MSA calibration gas is supplied with individual Certificate of Analysis to NIST-traceable standard and MSDS. Cylinders, testing systems, and detectors also meet all applicable OSHA regulations and follow relevant safety standards in markets they ....
Check Stock