ReviewsGas Flow Meters

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

• 【Hight Quality & Sturdy Argon Regulator with Hose】Argon flow gauge regulator's body is made of high-quality brass, being sturdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
• 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
• 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
• 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one u....

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

• ...are x 3/8" Male Pipe & 1/2" Male Flare x 3/8" Female Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
• HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
• it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
• CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
• BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
• COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..

AHP Alpha-TIG 225Xi 200 Amp IGBT AC/DC Pulse TIG/Stick Welder 110v/220v Dual Voltage

• Synergic Function: this mig welder designed basic at One-Knob Intelligent control system. Mig machine can automatic compensation and adjustment of....
• 110/220V Dual Voltage: This mig welder is dual voltage 110/220V, Machine will auto indicate the input AC voltage, Max output current is 165A, Duty....
• Lift Tig, 2T/4T Gas/Gasless Function: Machine with Lift TIG function, It is IGBT inverter Gas/Gasless mig welder, Use 0.030’’(0.8mm) Solid and....
• Arc force, Hot Arc, VRD: This mig machine will auto control voltage and current to achieve smooth arc, This mig welder quite easy using for the Newer....
• Mig Welder, What’s come with machine: 1 x Mig machine, 1 x 3meters Mig torch, 1 x Ground clamp with 3meters cable, 1 x Stick holder with 3meters....

Mr. Heater F273763 Two Stage VericalPropane Regulator 1/4

Uniweld R1563 NITROGEN REGULATOR 5-175 PSIG

• Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
• Bright orange float ball visually confirms the flow of nitrogen gas.
• Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
• Protected from over pressure with a reseatable safety blow off that opens at 200 psi.

Noritz NRC711 157,000 BTU Direct Vent Condensing Residential Tankless Water Heater (NG)

• Application: Residential, Product Type: Tankless Heater, Type: Condensing, Fuel Type: Natural Gas.
• Gas Input: 15000 to 157000 BTU/h, Energy Factor: 0.94, Efficiency: 93%, Max Flow (GPM): 7.1.
• Flow Range (GPM): 0.5 to 7.1, Min Flow (GPM): 0.5, Depth (Inches): 6.7", Height (Inches): 23.6".
• Width (Inches): 18.3", Max Temp (F): 140°F, Gas Connection: 3/4", Water Connection: 3/4".
• Installation Type: Indoor Only, Warranty: 5 Year Parts/12 Year Heat Exchanger, Energy Star Rated: Yes, Venting Requirement: PVC/CPVC.

Adamas-Beta LZQ-4 Flowmeter Gas Oxygen Flow Meter Nitrogen Flowmeter 1-10LPM

• The gas flowmeter is made of high quality material, it is transparent and can hold up to 0.6MPa pressure..
• Beautiful look,low weight,unbreakable and long life..
• Used to measure single-phase non-pulsating gas flow,easy to use and lasting performance..
• Mainly used for detecting the oxygen, nitrogen flow, control gas flow and can be used in industry, flowmeter interface is connected by thread....

STYDDI 3 Feet Low Pressure Propane Regulator and Hose with Propane Tank Gauge, Universal QCC1 Replacement Hose with Regulator for Most LP Gas Grill, Heater and Fire Pit Table, 3/8 Female Flare Nut

• ...ane hose and regulator assembly is equipped with tank gauge level indicator, allows you to monitor the fuel level without necessarily removing the tank. The color-coded dial lets you see when your propane gas level is low at a glance without spending more money on extra gas meter..
• CSA CERTIFICATED & BUILT-IN EXCESS FLOW PROTECTION FOR YOUR SAFETY. CSA certificated ensures secure, airtight connection between grill and tank. When your propane gas left in your tank too low, or the capacity flow of your appliance exceeds this regulator's Max. flow capacity too much, it will shut off the gas flow automatically..
• EASILY INSTALL WITHOUT A HITCH! Please DOUBLE CHECK your appliance connection is 3/8" MALE FLARE FITTING CONNECTOR. Insert the black plastic fitting and rotate clockwise to your QCC1/Type 1 propane tank connection place. Then connect the regulator hose end connect to your 3/8" male flare connector propane appliance. Its compatible with your 20-50 lb propane gas tank..
• UNIVERSAL FOR MOST LOW-PRESSURE GAS PROPANE APPLIANCE. QCC1/QCC/Type 1 hose and regulator replacement for Weber Genesis 300-series, Genesis Silver C, Genesis Gold, Genesis Platinum, Spirit E-210/E-310 etc.and most of Chari-broil gas grill with side burner.

RX WELD Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

• 1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
• 2.Accurate Gas Flow Gague：Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
• 3.RELIABLE QUALITY - Our argon flow meter's body is made of high-quality brass, which can withstand harsh environments..
• 4.OUTPUT:Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting.It also comes with a standard 1/4" barbed fitting.
• 5.DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering..

Noritz EZTR40 120,000 BTU Indoor Direct Vent Condensing Tankless Water Heater Bundle Pack (NG)

• Application: Residential, Product Type: Tankless Heater, Type: Condensing, Fuel Type: Natural Gas.
• Gas Input: 15000 to 120000 BTU/h, Efficiency: 93%, Energy Factor: 0.91, Flow Range (GPM): 0.5 to 6.6.
• Max Flow (GPM): 6.6, Min Flow (GPM): 0.5, Height (Inches): 27.2", Width (Inches): 18.3".
• Depth (Inches): 9-2/5", Max Temp (F): 140°F, Water Connection: 3/4", Gas Connection: 1/2".
• Warranty: 5 Year Parts/12 Year Heat Exchanger, Energy Star Rated: Yes, Installation Type: Indoor Only, Venting Requirement: PVC/CPVC.

Bunsen Burner, Natural Gas - Flame Stabilizer, Air Flow Adjustable - Cast Iron StabiliBase, Anti-Tip Design with Handle - Suitable for use with Natural Gas - Eisco Labs

• SIMPLE DESIGN || This basic Bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. Features air flow adjustment sleeve and brass flame stabilizer. Burner is designed to have the gas flow controlled via the valve at the gas output, not at the burner. Simple, easy to use burner jetted for natural gas.
• FOR NATURAL GAS || Suitable for use with natural gas. Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing.
• CAST IRON BASE || This improved design has an extended cast Iron base (4.25" x 4.25") that prevents tipping, even when hoses are connected. Burner feet are spaced at all four corners for added stability and allows burner to fit comfortably under stands. Burner equipped with a sturdy "Candle stick holder" handle. This safety feature is casted into the base to allow user to move burner without getting harmed.
• FLAME STABILIZER & AIR FLOW ADJUSTABLE || Burner features an air flow sleeve, allowing you to adjust the amount of oxygen drawn into the tube. Additionally, this design features a brass flame stabilizer that is fixed to the burner tube.
• MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highes....