ReviewsGas Line Hose

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • SIZE- Length 24 inch flexible yellow coated 304 stainless steel gas connector hose, flexible gas hose supply gas line connector adapter:2 pack 3/4 Inch FIP, 2 pack 3/4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
Check Stock

Medoon 10ft 10AN Black Nylon And Stainless Steel Braided Fuel Oil Hose Fuel Line 10pcs 10AN Hose Fitting Kit 6pcs 10AN Hose Separator Clamp 2pcs 10AN to 10AN Male Coupler Adapter Straight Fitting

  • 100% QUALITY MATERIAL:Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The fitting made of T6061 Aluminum,high strength and good durability.The material of union adapter is lightweight aluminum..
  • EFFECTIVELY:The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas or antifreeze.10an hose separator clamp is not disposable, and you can easily reuse them. You can use them for Fuel Line, Oil Hose, Brake Line, Water Pipe, Gas Line and so on..
  • USEFUL:Inner core CPE has excellent corrosion resistance. It is maintenance free and precision engineered to increase life.Working Temperature: -40 F to 257 F(-40°C to +125°C) under most operating. Working Pressure:500 PSI.
  • Package Including:10pcs 10AN hose fitting + 10Ft AN10 Stainless Steel Oil line + 6pcs 10AN Hose Separator Clamp + 2pcs 10AN male coupler.
  • 100% SATISFACTION:If you are not satisfied with our fuel oil hose end fitting kit,please conntect us,we will try our best to solve your problem..
Check Stock

60 Inch Gas Hose Connector Kit for Stove Dryer Gas Water Heater Pipe Diameter 5/8 in OD(1/2 in ID) Connector Size 1/2 FIP.1/2 MIP.3/4 MIP Stainless Steel Yellow Rind

  • KIT INCLUDE: 1 set bellow with yellow rind. 2 pack threaded connectors 15/16 Inch-16 UNx3/4 Inch MIP(Tapped 1/2Inch FIP ), 2 pack 15/16 Inch-16 UNx....
  • COMPATIBLE WITH: A stainless steel gas line hose designed mainly for gas stove, gas dryer, gas water heater. It has an outside dimension of 5/8 inch,....
  • DESIGNED CORRUGATED: The stainless steel gas line hose is designed with corrugation, for better use in a narrow range. The corrugated pipe has high....
  • EASY TO INSTALL: No need for more connectors. Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more....
  • ONE YEAR WARRANTY: Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on....
Check Stock

Slime 40069 Inflation Station, Garage Inflator, Pro-Series, Wall Mounted Air on Demand, Flat to Full in 4 Minutes, Cars, Trucks, Bicycles, 120V,Black

  • ...e: 12mm inner diameter x 16mmOD (0.48" inner diameter x 0.63 "outer diameter), so Our natural gas hose can provide up to 100,000 BTU/hour of Flow Capacity, and provide sufficient airflow for larger sizes equipment to meet your more needs..
  • 【Application 】- Gas line Used to Connects any indoor/outdoor Natural Gas or Liquid propane applications to the gas supply piping, such as fire pit gas tube, gas range pipe, water heater gas hose,Generator gas tube,Compressor gas tube,Grill gas line.etc.
  • 【Sturdy material 】- The inside of the flexible gas line is stainless steel SUS304 corrosion-resistant material, the surface layer is 0.079inch UV-resistant yellow polyethylene jacket, Comes with a 1/2" MALE Brass fittings on both end, Standard Male and Female Pipe Threads for easy connections..
  • 【Flexible and Safety】- Corrugated Stainless Steel Tubing is flexible and can be cut into any length you need,easily snakes into attic and basements areas, around corners and bends, Using one-piece molding exquisite Craft, There is no interface in the middle of the pipe body, reducing the connection point and preventing gas....
Check Stock

Vincos 20Ft 6 an 6an AN6 Nylon and Stainless Steel Braided Oil Gas Fuel Hose Fuel Line + 10pcs 6an Hose Fitting Kit

  • Package Including: 16 Ft Silver Braided Fuel/Oil/Gas Line Kit:(10pcs 6AN hose fitting + 16Ft AN6 PTFE Oil line).
  • Universal Application: The fuel line hose is capable of handling nearly every plumbing task on your car and is safe to use with fuel, oil, water,gas....
  • Hose Material: Inner core PTFE has excellent corrosion resistance..
  • Working Temperature: -40 F to 248 F(-40¡æ to +120¡æ) under most operating. Working Pressure:500 PSI.
  • Features: Maximized Resistance to Heat, Corrosion and Abrasion.
Check Stock

Red Gas Line Air Hose - 25ft Length CO2 Tubing Hose ID 5/16 inch OD 9/16 inch,Include 8 PCS Free Hose Clamps Used for Draft Beer Home Brewing

  • Red Gas Hose ID 5/16 inch, OD 7/16 inch, Length 25ft.
  • Free 8 PCS Hose Clamp will Guarantee have no Leak Problem.
  • The CO2 Gas Line is Tasteless and Odorless.
  • Usually Connect Keg Regulator, Gas Modifold, Keg Coupler or other Beer Equipment.
  • Quality Guarantee: Any Defective for Red Gas Line, Backed by 45 days Money-Back..
Check Stock

PatioGem 12Feet 1/2 Inch Natural Gas to Propane Conversion Kit Compatible with Kitchen-aid Propane Gas Grill Conversion, 710-0003 Natural Gas Hose and Regulator, Convert Propane to Natural Gas-CSA

  • ...e 24hrs/7days non-stop customer support to you. As the compatibility or the connection working principle of the natural gas hose sometimes can be tricky, pls feel free to contact us to address your concerns. Please kindly note that checking your appliance’s capacity (btu/hr) and the diameter of your permanent gas line before ordering will help you make a better choice..
Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

  • The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
  • 10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
  • These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
  • Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
  • EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

ATPEAM Hose Clamp Pliers Pinch Off Pliers Set 3 PCS Plastic Fuel Line Clamp Pliers Set for Fuel Hoses, Gas Lines Brake Hoses, Radiator Hoses, Coolant Hoses (3pcs Straight)

  • ...on plastic with good non-conductivity to ensure your safety during operation, the hose clamp pliers set is of highly durable, long lasting and chemical/fuel resistant. No need to worry, it dose not melt when in contact with chemicals or fluids..
  • 【Locking Function】These line clamps flexible hose clamps pliers have smooth rounded jaw edges and adjustable locking ring locking function which can squeeze the hose against the stable surface over a wide area without damage the hose. Each hose clamp plier includes a slider to lock the pinch off pliers in place, radiator hose clamps holds hoses in place so that you can work with both hands..
  • 【Ergonomic designed】This plastic fuel line clamp pliers set adopts ergonomic designed handle for comfortable grip and easy use, the grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue..
  • 【Specifications】In these pinch pliers kit, you will get 3 sizes pinch off pliers to fit all types of hoses, including straight hose clamp pliers: 5.9"/155mm, 7.3"/185mm, 10"/255mm. This hose plier set can clamp hoses with diameters of 15mm,....
Check Stock

Fuel Line Quick Connector Hose Union for 5/16" OD Nylon Tube, Pack of 4

  • Connect nylon line. Fit for 5/16" to 5/16 inch OD nylon tube hose or gas line.
  • Quick connect hose coupler union used to connect 5/16 inch OD nylon fuel hose together.
  • Save time and money by repairing only the damaged section, not the entire fuel line.
  • Highly Resistant to the Extreme Temperatures.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock