ReviewsGas Pressure Test Gauges 2

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....

Check Stock

MEANLIN MEASURE -30~30Psi Stainless Steel 1/4\ NPT 2.5\ FACE DIAL Vacuum Pressure Gauge ，Center Back Mount

Brass wetted parts for measuring non-corrosive liquid and gas pressure.
Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
Lower mount or center back male connection with 1/8.

Check Stock

Yellow Jacket 49017 Digital Refrigeration Gauge

【Evaporation/Condensation Pressure and Temp Test&High/Low-pressure Temperature Test HVAC Manifold】The HVAC gauges could operate dual pressure and temperature test to help you determine refrigeration capacity of refrigeration system. The lower the pressure and temperature of the evaporation(Ev)/condensation(Co) are, the more efficient the refrigeration cycle and the greater the refrigeration capacity will do. It also could test the temperature of the refrigerant in the high/low-pressure pipes..
【Superheat and Subcooling Test&Pressure Leak Test】When refrigerant type is set and temperature clamps are connected to air conditioning pipes, HVAC gauges automatically read the degree of Superheat(SH) and Subcooling(SC). The higher the degree of superheat, the smaller the opening of the expansion valve (the refrigerant filling is less) can be determined. Calculate the pressure difference between the initial test pressure and the second test pressure to determine if the refrigerant is leaking..
【Vacuum Pumping & Refrigerant Filling & Built-in 89 kinds of Refrigerant Database HVAC Manifold】Digital manifold gauge set can connect refrigeration equipment and vacuum pump for vacuum pumping operation. Vacuum pumping can make it easier to fill the refrigera....

Check Stock

Poarmeey XXL Tattoo Arm rest Stand hydraulic System to Adjust the Height Soild Black Design for Professional Tattoo Equipment Supplier(Black)

..., LiuGong, Ammann, Demag, Ingersoll Rand, New Holland, Terex, Daewoo and most USA, Japanese and European brand excavator construction machinery. Widely used in construction, machinery, shipping, chemical industry, mining, petroleum, etc..
Includes — 2 Intelligent Digital Pressure Gauges: 0-700BAR/10000PSI/70Mpa | 9 Type Test Couplings: 1×G1/8", 1×G1/4", 1×G3/8", 1×M10*1, 1×M10*1.25, 1×M14*1.5, 1×UNF 7/16-20, 1×UNF 9/16-18 and 1×NPT 1/4-18 | 3 Type Quick Connectors | 2 Test Hoses and a Sturdy Aluminum Carrying Case..
Perfect Design — Available with various port connections to meet different installation needs. It is flexible use, simple operation, easy debugging, safety and reliability. Can be used to measure gas, liquid, oil and non-corrosive mediums of stainless steel. Both the two 63 inches / 1.6m Length Hoses have an M16*2 end and a NPT 1/4" female at the other end..
Superior Material — Premium grade hard stainless steel housing with a silicone case, anti-corrosion and impact resistance. High-precision piezoresistive pressure sensor and display the pressure accurately in real time. Nylo....

Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator CGA580 Compatible with Miller Lincoln Mig Tig Weld 0-4500PSI / 0-10BAR

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Features: 2" dual-gauges for easy reading..
3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
5.Plastic adjustment knob for smooth "easy touch" flow settings..

Check Stock

RX WELD Argon CO2 Regulators Gauges Gas Welding Regulator cutting Regulator CGA580 With 6.6Ft Gas Hose

1.VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
2.Features: 2" dual-gauges for easy reading..
3.Safe Design: Accurate measurement of gas. Internal safety pressure relief design..
4.Specifiction:Brass regulator body,CGA580 fitting, FEMALE 5/8" Outlet.
5.Hose Included: RX WELD 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.Plastic adjustment knob for smooth "easy touch" flow settings..

Check Stock

Kegco Elite Series Dual Gauge CO2 Draft Beer Regulator, 2 Product

This regulator's two product design with two 5/16" barbs allows you to simultaneously dispense two beer kegs at the same pressure.
Dual pressure gauges allow you to monitor both the output pressure to the kegs and the volume of CO2 gas remaining in the cylinder.
Stylish black pressure gauges feature high-contrast red and white writing and sturdy rubber boots that help protect them from damage.
Large ergonomic handle makes it easy to make precise pressure adjustments between 0-60 PSI for greater dispensing control.
Durable chrome-plated brass body features a manual pressure release valve and an internal pressure relief valve that releases at 55-65 PSI.

Check Stock

Hydraulic Pressure Gauges Kit - SINOCMP Upgraded Version Excavator Hydraulic Gauge Kit, 10 Couplings, 3 160cm Long Test Hoses and 4 Pressure Gauges, Lightweight Black Plastic Box 3KG, 2 Year Warranty

【Advanced Silicone Oil】: The advanced silicone oil WON'T turn yellow, and it has better shock resistance and higher accuracy..
【Widely Application】: 10pcs couplings suitable for Caterpillar/CASE/John Deere/Komatsu/HITACHI/Kawasaki/Kato/Hyundai etc most brand excavators, and also widely applicable to various pressure test scenarios..
【Package Include】: 4 Pressure gauges + 10 couplings + 3 test hoses + 1 sturdy case..
【Easy Carry and Use】: The portable storage box allows you to take it to any workplace freely. The advanced non-deformable sponge provide perfect protection for pressure gauges and accessories..
【Satisfaction Warranty】: We offer exchange or repair service for free in 2 YEARS warranty, and we offer 24-hour friendly customer service..

Check Stock

XZT 10000PSI Digital Hydraulic Pressure Test Coupling Kit,Repair Test Tools for USA Brand Excavator (10000PSI)

【13 Couplings】This Excavator Pressure Tester Kit comes with 13 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
【High-quality Gauges】The housing of our five gauges (150PSI/1500PSI/3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
【Complete Kit】Comes with 13 x Couplings, 14 x Tee Connectors, 5 x 61.5'' Test Houses, 5 x Pressure Gauges, and 1 x Sturdy PP Suitcase..
【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..

Check Stock

YFIXTOOL Hydraulic Pressure Test Gauge Kit for Excavator, Includes 12 Couplings, 3 Test Hoses, 3 Pressure Gauges (3500PSI, 6000PSI, 9000PSI)

【High-grade Silicone Oil】Our Excavator Pressure Gauges have built-in high-grade silicone oil, which will not turn yellow, has better shock resistance and higher accuracy..
【12 Couplings】This Excavator Pressure Tester Kit comes with 12 different couplings, perfect compatible with Caterpillar, Hitachi, Komutsu, Daewoo, Hyundai, Kato, Kawasaki..
【High-quality Gauges】The housing of our three gauges (3500PSI/6000PSI/9000PSI) is stainless steel and Polycarbonate glass, so they are sturdy, durable, impact resistant, and clear display..
【Complete Kit】Comes with 12x Couplings, 3x 65'' Test Houses, 3x Pressure Gauges, and 1x Sturdy PP Suitcase..
【Warranty】We provide 3-year warranty and 24-hour friendly customer service. Pls feel free to contact us if you have any issue about our product..

Check Stock

UHARBOUR Glycerin Filled Vacuum Pressure Gauge, 2-1/2\ Clear dial,1/4\NPT Bottom Connection, Stainless Steel Case, Brass Movement, Dual Scales -30inHg/-1BAR-0

Brass wetted parts for measuring non-corrosive liquid and gas pressure.
Circular dial is filled with glycerin and enclosed in a stainless steel 304 case for corrosion resistance.
Measures pressure with single (psi) or dual scale (psi/kPa)/(psi/bar)/(Hg. vacuum/kPa)/(Hg. vacuum/bar).
Display accuracy is + or - 2.5% of full scale value for the 1.5" (40 mm) and 2" (50 mm) gauges, and + or - 1.5% of full scale value for the 2.5" (63 mm) and 4" (100 mm) gauges.
Lower mount or center back male connection with 1/8.

Check Stock