ReviewsGas Regulator

GasSaf 6 Feet Propane Regulator and Hose Universal Grill Regulator Replacement with Stainless Steel Braided Hose for QCC1 Low Pressur LP Gas Grill, Heater and Fire Pit Table,3/8' Female Flare Nut

  • 3/8-inches flare fitting has an outside diameter of 5/8-inches in order to accommodate the flare seat,The Maximum 95, 000BTU per hour, low pressure propane regulator with 2feet/24inch Low Pressure LPG hose for propane gill and fire pit table, strong hose will last for a long time.
  • Replacement for Weber Genesis 300-series gas grills, Genesis Silver C, Genesis Gold , Genesis Platinum , Spirit E-210/E-310 etc. and most of Char-broil gas grill with side burner, Uniflame GBC873W-C, GBC873W, GBC940WIR, GBC940WIR-C , most of Kenmore gas grill and most of Brinkmann gas grill..
  • Easy installation - No tools required, tool-less attachment to tank. It is normal if you hear noise in the regulator, it is the resonance of the gas in the regulator..
  • Connects to QCC1/Type1 LP tanks and cylinders，fits to gas grills, heaters ,fire pit table and most QCC1/Type 1 low pressure gas application.Great for BBQ, camping, tailgating, heating needs or having an outdoor cookout..
  • Provides secure, air-tight connection between grill or fire pit and tank, no gas leaks, ensures safety while using grill, no issues with regulator or gas, air flow is kept stable and at appropriate levels.
Check Stock

Episode 12

  • ➥【Perfect Fit】- Replacement for Coleman Classic, PowerPack, Coleman Triton Portable Propane Gas Stove, Triton Propane Stove, series, Fold N Go Insta Start propane stove.
  • ➥【Incompatible】Not compatible with the Coleman Roadtrip Portable Grill (LXE, LXX.LX).
  • ➥ 【Compatible Models】:Fit for Coleman 5413, 5420A, 5423E, 5425A, 5426, 5430B, 5433, 5435B, 5435C, 5442, 5444, 5453, 5466, 5469 .9922. Notice ! Does not fit other Coleman models. Please check your oven model manual to confirm compatibility..
  • ➥【Premium Material】-Made of stainless steel and solid brass, it is sturdy, long-lasting. This propane gas regulator maintains steady 12 psi propane gas pressure. This allows you to amplify the quality of your camping or outdoor travel experiences, replace an old and broken part or just keep it as a backup in case.
  • ➥【Service Guarantee】 Replacement 5430 regulator parts If damage is found during shipping after purchase, please contact us directly through Amazon (MCAMAPS) platform. Get a 100% refund and technical support services within 24 hours. Note: The gas regulator with 1 pound tank cylinder must be tightened, it must be tightened in place when connecting the Coleman triton portable propane gas stove to avoid air leaks or not in place..
Check Stock

AJinTeby Griddle Regulator and 5FT Propane Adapter Hose Fit for Blackstone 17 Inch and 22 Inch Tabletop Griddle Grills and Other 2 Burner Griddle

  • 5ft Propane adapter and Griddle Regulator Replacement for Blackstone 17″ and 22″ Tabletop Griddles. Replacement blue rhino parts regulator.
  • Regulator: Compatible Blackstone 17 inch and 22 inch tabletop griddle.
  • Fits Pit Boss PB336GS 2 burner table top gas griddle and also Fits Blue Rhino Razor griddle.Also fits CharBroil 19952085 22-inch 2-Burner Tabletop Gas Griddle.
  • Propane AdapterHose: Braided propane tank adapter hose fits for Weber Q grills, Coleman camp stove, Dyna Glow, Blackstone griddle, and other most Propane heater, Portable Grill, Camp Stove (POL Type).
  • Gas Flow: 25,000BTU/hr Outlet Pressure: 11″W.C. CSA Certified.
  • Note: This regulator perfect for Blackstone 17,22 in grill also fit for another Tabletop Griddle. 1lb to 20lb propane tank adapter with regulator.
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

MRbrew CGA-320 Keg Regulator, Quick Disconnect CO2 Kegerator Regulator with Pressure Adjustment Knob, Beer Regulator with Safety Manual Pressure Relief Valve, with 2 Swivel Nut & 1/4’’ & 5/16’’ Barbs

  • 【1/4’’ QUICK DISCONNECT】MRbrew thread to barb keg beer regulator comes with 1/4” swivel nut, allows CO2 regulator to be used with 1/4″ and 5/16″ I.D size hoses, threaded setting makes disconnection between regulator and gas hoses a great breeze!.
  • 【EXCELLENT SEALING & ANTI-BACKFLOW】Durable thick nylon washer achieves quad—Ring inlet seal at connection between tank and regulator, perfectly avoids one leakage source, turning off ON/OFF valve avoids back-flow of beer, worry-free operation with MRbrew keg regulator!.
  • 【YOUR SAFETY, THE FIRST!】Integrated sintered bronze mesh inlet gas filter perfectly controls co2 gas flow, manual pressure release valve releases extra pressure at 45 PSI, help you get correct pressure reading, always keeps you safe when you operate regulator!.
  • 【DUAL GAUGE & STABLE PRESSURE】MRbrew upgraded regulator comes with dual pressure gauges, displays pressure clearly, easy to adjust and stabilize to the pressure you want by pressure adjustment knob, a well-built regulator for getting accurate pressure!.
  • 【100% LIFELONG IUUSES SOLVING FOR YOU】Each MRbrew keg regulator is backed by unbeatable, reliable, trusted product quality and customer service, please feel free to contact us if you....
Check Stock

PETKAO 6FT Propane Adapter Hose, 1lb to 20lb Converter with Gas Regulator for Blackstone 17', 22' Tabletop Griddle, Pit Boss PB336GS 2 Burner Table top Gas Griddle and Dash Griddles

  • The propane replacement hose regulator/conversion kit works great on griddle station, Pit Boss PB336GS 2 burner table top gas griddle, Blackstone 17″and 22″ Tabletop, and the Dash Griddles.And it works well on Weber Q series gril, camp stove, portable propane stove, heater, etc..
  • Multiple ways to connect! You could connect the 1lb tank bottle directly to the 17-inch, 22-inch Blackstone desktop via the desktop gas grill regulator or connect 20lb or larger cans to Blackstone’s Tabletop using a 6ft propane hose..
  • The interface type of PETKAO’s propane replacement hose regulator: Table Top gas grill regulator The use of 1″-20 Female Throwaway Cylinder Thread Inlet fits perfectly with a 1lb tank..
  • Attaches easy and easy hook on with properly! Only the hand wheel handle is needed, no other tools are required to tighten. High quality 100% solid brass, which can be used to provide a firm and sealed connection between storage tanks..
  • The Griddle regulator replacement part:Gas flow: 25000BTU/hr, outlet pressure:11″W.C.
  • The 6 foot propane hose: Gas type: LP/LPG, Inlet Pressure:25-250PSI, Intake thread: QCC1 (1.312″-5ACME), Outlet thread: QCC1(1″-20UNEF).
Check Stock

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ❤【GardenNow Upgraded 2-Stage Auto Changeover LP Propane Gas Regulator】This Rv Propane Regulator allow you to hook up 2 Propane tanks and automatically switches from primary to reserve tank when primary is empty and vice versa. The indicator will changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
  • ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
  • ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capa....
Check Stock

Robertshaw 700-503 Millivolt Gas Valve, 250 To 750 Millivolts

  • Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.
  • Natural to lp and lp to natural conversion kits available for standard and slow opening gas valves.
  • Description: 24 vac dual intermittent pilot, slow opening gas valve with 3/4 in. X 3/4 in. Inlet/outlet, standard opening and 3.5 in. Wc pressure regulator setting.
Check Stock

Nitrogen Regulator with 60' Hose for HVAC Purge, 0-800 PSI Output Pressure, CGA580 Inlet Connection and 1/4'' Male Flare Outlet Connection

  • 【Connection】CGA-580 Inlet Connection fits standard Nitrogen, Argon, Helium, and Inert Gas Tanks from any supplier.1/4" Male Flare Outlet Connection fits HVAC Charging Hoses for Purging ,Pressure Testing and High-pressure lines..
  • 【Accurate Pressure Gauge】The Nitrogen Gas Regulator has two Easy to read pressure gauge,covered with scratch-resistant plastic protective film and rubber cover.Input: 0-4000PSI.Output: adjustable 0-600PSI.The display show 800PSI that you can rate them at 600PSI, but they are able to go up to 800PSI..
  • 【Durable Construction】Our Nitrogen Regulator is made of solid brass,so the surface can keep good looking in a long time. Precision thread design ensures high sealing performance and avoids gas leakage. You can adjust the nitrogen regulator smoothly and accurately through the T-handle to prevent galling..
  • 【Application】The Nitrogen regulator is a standard pressure control valve that reduces the input pressure from a liquid or gas stored in a tank.It is great for HVAC purging,pressure tests,inertization,leakage tests,and Soldering,like the accurate reading of Nitrogen Regulator would help you to adjust pressure before HVAC puring..
  • 【Filter Structure】A filter structure is used at the connection, which can effectively ....
Check Stock

LUCKEG CGA580 Nitrogen Beer Regulator Dual Gauge Gas Air Pressure Regulator with 0-100 PSI Delivery Pressure Premium Double Gauge Nitrogen Keg Regulator with 5ft Gas Line and Free Worm Clamps

  • 1.Include: Draft Beer Regulator CGA580(1 PCS), 5ft Red Gas Line 5/16" ID, 9/16"OD(1 PCS), Free Worm Clamps(2 PCS).
  • 2.Material: Metal for Nitrogen Regulator, PVC Material for Gas Line, Stainless Steel Material for Clamps.
  • 3.Connect tips: Tighten the Clamps when it Connects the Beer Gas Line will guarantee no Leak.
  • 4.Gas Gauge: 0-100 PSI and 0-3000 PSI, Manual pressure release valve releases extra pressure at 45 PSI, Recommended pressure is 15-30 PSI which keeps you safe when you operate regulator.
  • 5.You will be protected by our hassle free guarantee. If you have any problem about Nitrogen Regulator, please feel free to contact us, we'll help you solve it until you are satisfied..
Check Stock

Shok Blok SB-FPV-40 Water Filter Pressure Regulator Protection Valve for RO & Filter Systems - 1/4\ QC Ports, 40 PSI

  • GAS TYPE & PRESSURE - Gas Type: Natural Gas (NG). Inlet gas pressure: 1/2 PSI. Outlet pressure range: 3" - 6" Water Column.
  • PIPE THREAD SIZE - 3/4" Inlet & 3/4" Outlet FPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1-1/16 inch as shown in the picture’s table..
  • CAUTION - This regulator has 1-1/16" openings for 3/4" gas pipes. The 3/4" gas pipe means interior diameter 3/4" but outside diameter is 1-1/16.
Check Stock