ReviewsGas Regulator Fittings

AJinTeby Gas Grill 5430 Regulator Replacement for Coleman Propane Stove Not Fit for Coleman Roadtrip LXE Grills

Regulator only fit for Coleman Triton Portable Propane Gas Camp Stove, Classic Camp Stove with 2 Burners, Fold N Go Stoves Coleman Classic Propane....
Propane Grill Connector: Premium low-pressure propane grill regulator. Gas Grill 5430 Regulator Replacement for Coleman Propane Stove.
Easy Installation - The stove regulator replacement is easy to install and operate. This replacement propane gas regulator keep your stoves running....
Great Replacement - Made of stainless steel and solid brass, it is sturdy, long-lasting. This propane gas regulator maintains steady propane gas....
Check the user manual of your Coleman stove to see if it is compatible with this gas stove regulator. Note: NOT fit for Coleman Roadtrip LXE Grills..

Check Stock

PatioGem 12Feet 1/2 Inch Natural Gas to Propane Conversion Kit Compatible with Kitchen-aid Propane Gas Grill Conversion, 710-0003 Natural Gas Hose and Regulator, Convert Propane to Natural Gas-CSA

...just needs to remove the original propane orifice and replace the natural gas orifices. Equipped with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings, 3/8" Female Flare by 1/2" Male Flare Brass Adapter,You can quickly connect and disassemble this natural gas hose and natural gas regulator kit as needed..
【Widely Applicable】Natural gas hose and regulator can convert the propane grill to use natural gas, perfectly Suitable for most models of KitchenAid brand gas grills,such as 720-0826, 720-0893, 720-0733,720-0709C, 720-0709,720-0709B, 720-0733A, 720-0819A, 720-0787, 720-0819B, 720-0745B, 720-0745,720-0745A, 720-0787D, etc. The natural gas conversion kit is equipped with a natural gas hose, which is also suitable for natural gas grill, fire pit, patio heater, pizza oven and portable generator..
【High Capacity & Convenient Length】With a capacity of 80,000 btu/hrs, the natural gas hose is designed at 12 feet to meet different needs of our customers and usage scenarios including backyard barbecue parties, rv camping, a domestic propane to natural gas conversion project and etc..

Check Stock

AGPTEK Oxygen Acetylene Flashback Arrestors Set Regulator End 9/16-18 Threads B Size

Flashback arrestor set has internal check valves for both oxygen and acetylene.
Standard -InchB-Inch fittings for 9/16 -18 threads,B size..
NOTE: The acetylene arrestor in this set can also be used for Propane or Mapp gas..

Check Stock

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..

Check Stock

Stark USA 55147 Oxygen Acetylene Welder Tool Kit w/4 Nozzles Cutting Torch 15' Hose Gauge Regulators

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability. Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
A complete set includes a torch handle, oxygen regulator and acetylene regulator.
Victor-style welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.

Check Stock

GSL392 Inline Fuel Pump & 58 PSI Fuel Filter Regulator 58 PSI LS Swap Fuel Pump EFI Conversion Fuel Filter Pressure Regulator 255LPH High Pressure External Pump 6AN Fittings 400-939 GSL392-400-939

REPLACEMENT 58 PSI FUEL FILTER REGULATOR - Fuel pressure regulator filter kit comes with 6AN adpater fittings for LS Swap , which can deliver 58 PSI (4 BAR) to your fuel rail and return unused gas to the tank. Besides, it can ensure the clean fuel is delivered properly to your engine with a 10 micron fuel filter, which play an important role in protecting the daily operation of the engine, and extending the engine service lifespan..
GSL392 HIGH PRESSURE FUEL PUMP - LS Inline fuel pump is designed to start higher-pressure fuel racing or performance-purpose vehicles stably and safely, which can help to meet the requirements of most modern turbocharging applications. At 80 PSI, Yinlowa 255 lph high pressure fuel pump can flow around 132 liters (35 gallons) per hour.
At that same 80 PSI the equivalent HP (high pressure) fuel pump can flow over 210 liters (50 gallons) per hour.
FITMENTS - GSL392-400-939 Inline Fuel Pump fits EFI applications including turbo and supercharged, variety of pressures and flows available, including high pressure performance.
58 PSI Fuel Pressure Regulator AN-6 Fittings for LS Swap EFI Conversion i....

Check Stock

Aupoko Natural Gas Conversion Kit for Grill 10FT 1/2 ID Natural Gas Quick Connect Hose Natural Gas Regulator 1/2 Quick Connect Disconnect Adapter 3/8 Fitting Convert Propane to Natural Gas

【Natural gas to propane conversion kit】The propane to natural gas conversion kit includes 5.9-inch natural gas regulator hose adapter, 10-foot....
【Two gas regulation modes】5.9" manifold gas regulator hose kit. Note: The original mode of the regulator valve is the propane gas regulator valve....
【CSA certification hose】10 feet 1/2" ID natural gas quick connect hose, Equipped with 1/2" female pipe thread to 1/2" female quick connect....
【Compatible with】Natural gas hose and regulator kit, perfectly suitable for most models of KitchenAid brand gas grills, such as 720-0709,....
【Aupoko service】Customer's satisfaction is our greatest pursuit. If you have any problems during the purchase or use, you can contact us at any....

Check Stock

FZONE Aquarium CO2 Regulator Mini Series V3.0 Dual Stage with DC Solenoid and Bubble Counter Check Valve Compatible Paintball Tank CGA320 CO2 Cylinder

EASY INSTALLATION ✔ All you need to install this CO2 Pressure Regulator is an adjustable wrench. Each unit is supplied with 2 O-ring washers. Always place a washer between the lock-down nut and the tank to ensure a tight seal..
PROFESSIONAL GRADE ✔ This CO2 regulator fits all standard CO2 tanks with CGA-320 inlets. You can adjust the working pressure on both outputs via individual control knobs in the front. Gas Shut Off Valve for easy keg/tank swaps. Safety pressure relief valve (PRV) / and individual shutoff valves on each output..
VERSATILE APPLICATIONS ✔ Works with 15.5 Gallon Kegs, 5 Gallon Kegs, 1.75 Mini Kegs, Half Barrels and Quarter Barrel Units. Barbed gas outlet fittings included for 5/16" through 3/8" hoses and tubing, allowing for an easy connection to many gas line types..
HEAVY DUTY WITH TRIPLE GAUGES ✔ SPARC 2 Stage CO2 Pressure Regulators are a heavy duty piece made with triple gauges to accurately measure working pressure in 2 systems simultaneously and 1 gauge showing CO2 tank pressure. 0-3000PSI input pressure (gauge reads 0-3500PSI) and 0-60PSI output pressure (gauge reads 0-80PSI)..

Check Stock

Argon CO2 Regulator Gauge Welding Gas Regulator with 6.6Ft Gas Hose CGA580 Inlet Connection 0-4500PSI/0-10BAR Input Pressure

【CGA-580 Connection】The Argon regulator with CGA-580 Inlet Connection fits standard Argon, CO2 Gas Tanks from any supplier. The gas regulator is a standard pressure control valve that reduces the input pressure from gas stored in a tank.
【Accurate Pressure Gauge】Input pressure: 0-4500PSI. The Argon CO2 Regulator has two Easy to read pressure gauge, the argon flow meter provides accurate measurement of gas. And it has Internal safety pressure relief design to protect you form danger..
【Brass Material】Our welding gas regulator is made of solid brass, so the surface can keep a good looking for a long time. Precision thread design ensures high sealing performance and avoids gas leakage..
【General Feature】A 6.6Ft gas hose ensures your tanks at a safe distance from your Mig Tig welding projects, 5/8'' Female and 9/16" male outlet connection. And the filter structure at the CGA-580 connection effectively prevent debris in the argon tank entering the gauge with the airflow..
【Application】Our welding regulator is pefect for MIG and TIG welding. It is an economic alternative for you to get more precise gas metering, like the accurate reading of argon regulator would help you to adjust pressure before welding..

Check Stock

BMMXBI Griddle Regulator Fit Blackstone 17/22 Inch Tabletop Griddles Gas Regulator for CharBroil 19952085 Blue Rhino Razor Griddle Pit Boss PB336GS

✅ PACKAGE: Include 1 pcs Grill Regulator, replacement for grill Regulator. You don't have to look around for replacement parts anymore. It's the best gift for who love barbecue. This is perfect fits for your grill..
✅ FITS: Gas Regulator Gas flow 25000BTU/hr, outlet pressure 11"W.C, more safe and stable. Please kindly make check the SIZE and MODEL of your original parts and compare with ours BEFORE purchasing..
✅ PERFECT FITS: Gas Regulator replacement for CharBroil 19952085 22-inch 2-Burner Tabletop Gas Griddle. For Pit Boss PB336GS 2 burner and Blackstone 17/22 Inch Tabletop Griddles. It is the perfect replacement for the gas regulator of your grill..
✅ MATERIAL:Gas regulator is made of high quality stainless steel and 100% Solid brass with leak-resistant air pipes. Lightweight and durable. Easy to install without tools, make your griddles work better, years of regular use. Measure your original part to ensure you get the right part. You don't need to waste unnecessary expenses to frequently replace parts..
✅ ORDER NOW: So why wait? It's the bes....

Check Stock

MCAMPAS 10 Feet 1/2 ID Natural Gas Quick Connect Hose and Regulator Replacement for Kitchen-Aid 710-0003 Gas Grill Conversion Kit,Convert 4-Burner Cabinet Style Gas Grill to Natural Gas

Natural gas hose and regulator for Kitchenaid gas grill conversion connection kit includes 10-foot length 1/2 inch ID natural gas hose with quick....
10 feet 1/2" ID gas quick connect hose with 1/2" male quick plug, 3/4-16 UNF female flare fitting on the other side.
5.9" manifold gas regulator hose kit - 1/2 PSI（3.5 Kpa) natural gas regulator valve. Can be switched manually natural Gas Or Propane gas regulator....
Compatible with converts these kitchenaid grill models to natural Gas: 720-0709, 720-0709B, 720-0709C, 720-0733, 720-0733A, 720-0745, 720-0745A,....
Used to convert the home's natural gas pipeline or large LP gas Gas tank cylinder quick connection to existing low pressure supply gas grill....

Check Stock