ReviewsGas Shielded Wires

DanYee Cat 8 Ethernet Cable Nylon Braided 10ft High Speed Network Cable LAN Cable Wires CAT 8 RJ45 Ethernet Cable Cord 3ft 10ft 16ft 26ft 33ft 50ft 66ft 100ft Black 10ft

Danyee Cat 8 Lan Cable support bandwidth up to 2000MHz & transmitting data at speeds of up to 40Gbps ,connect to LAN/WAN segments and networking gear at maximum speeds.
Special surface braided nylon made the DanYee network cable stronger and elegant ,what's more,it is dirty-proof too..
RJ45 UNIVERSAL CONNECTOR -- RJ45 connectors offer universal connectivity to computers and network components, such as Wi-Fi router, modem, printer, XBox, PS2, PS3, PS4 and switch box..
SHIELDED FROM INTERFERENCE: Made of 4 shielded twisted pair (STP) of copper wires with two RJ45 connectors on each end. Compared to the Cat 6 network Ethernet cable, the additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality.
At DanYee's products,we can supply lifetime free customer service..

Check Stock

Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400

...s not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..

Check Stock

iMeshbean® Complete Replacement Mig Welding Gun for Clarke 180EN and 130EN Mig Welders

This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..

Check Stock

Outdoor Ethernet 250ft Solid Shielded Cat6 Cable Waterproof Buried-able UV Resistant-50u Gold Plated RJ45 Plug Connector-75m …

Can be buried directly in the ground and Supports both Cat 6 and Cat 5e applications.
Shielded connectors installed with boots and Shielded 23AWG Pure Oxygen-free Solid copper wires.
Waterproof, anti-UV, anti-aging, anti-decomposition high performance outdoor Ethernet Cat6 cable, Grounded Wire reduce ESD eliminate interference....
Support 10 Gigabits per second. Meets or exceeds Category 6 performance in compliance with the TIA/EIA 568B.5 standard. Backwards compatible with any....

Check Stock

AUCAS Cat 8 Ethernet Cable 50u Gold Plated RJ45 Connectors，32AWG Cat8 Network LAN Cord，High Speed for Gaming Modem Router PC,PS4,Xbox,PS4,Xbox 0.5M/1.5FT

【High-Speed Cat8 Ethernet Cable】: AUCAS cat8 Ethernet cable is made of 4 shielded foiled twisted pair(S/FTP) and single strand OFC wires(32AWG)....
【S/FTP Shielding】: Shielded with foiled twisted pairs, the individual twisted pair of this cat8 network cable is wrapped in a foil tape before....
【Upgraded Structure】: With the 32AWG cord, this cat8 LAN ethernet cable is wrapped with reliable and thicker PVC housing material, easy to carry....
【RJ45 Connectors & Wide Compatibility】：With two shielded RJ45 connectors at both ends, the Cat8 Ethernet cable works perfectly with networking ,....
【Weatherproof & UV Resistant】Cat8 lan cable is well constructed with pure copper core，aluminium foil shield, woven mesh shield, PVC outer cover....

Check Stock

Cat 8 Ethernet Cable 12ft, Eswmc Cat8 RJ45 Network LAN Cord 26AWG Lastest 40Gbps 2000Mhz SFTP Patch Cord Heavy Duty High Speed Cat8 Cable for Gaming, PS9, Xbox, Modem, Router, PC, Laptop

STABLE SPEED: Made of 4 Pairs 100% 26WAG pure & thick shielded twisted pair (SFTP) of copper wires with RJ45 connector on each end. Compared to the Cat7/Cat6/Cat6a/Cat5 network Ethernet cable, the Cat 8 Cable additional shielding and improved quality in twisting of the wires provides better protection from crosstalk, noise, and interference that can degrade the signal quality, the network speed is more stable.
FAST SPEED: Ethernet cable Cat 8 support bandwidth up to 2000MHZ and 40Gbps data transmitting speed, so you can connect to your LAN/WAN segments and networking gear at maximum speeds and surf the net, stream videos, music and other data at high speed without worrying about cables causing a mess.
Universal Compatibility: Cat8 patch cable is fully backward compatible with all the previous(cat5, cat5e, cat6, cat6a and cat7) RJ45 cabling and equipment. And Rj45 network cable is faster than cat5，cat5e,cat6 patch cords, you will have an better experience in using Dacrown cat 8 fast speed ethernet cord..
Heavy duty & Direct Burial:The quadruple shielded Cat8 Ethernet cable is super efficient in reducing EMI/RFI Interference and provide highest fidelity for long distance data transmission. With upgraded PVC, Cat8 is waterproofed & anti-corrosion and mor....

Check Stock

Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425

...s not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..

Check Stock

iMeshbean® Replacement Mig Welding Gun Stinger Torch Lead for Clarke 130EN 160EN 180EN Welder Parts 10 FT

This is a great replacement for Clarke 180EN and 130EN 160EN Mig Welders.
This welding gun will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
Length: 10 FT,There is a gas valve in the handle, so this gun can be used with or without gas..
The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..

Check Stock

Fender Pickup Mounting Tubing for Electric Guitar

The hot humbucker pickups fits for classic, heavy metal and other styles of electric guitars, use shielded wire to instead of the flimsy two-part wire, eliminate noise and to play mostly very cleanly, and have a bright tone, safe wiring with good noise protection..
Made of metal and ABS material,ceramic magnet,durable to use, sealed humbucker are triple wax dipped and vacuum sealed to eliminate any unwanted feedback and noise..
Each double coil pickups measures 93*46mm/3.66*1.81inch, color: black&white, resistance：7.5K-15K, 6 non-adjustable slug pole pieces&6 adjustable screws pole pieces, Neck pickup pole spacing: 50mm, Bridge pickup pole spacing: 52mm..
Easy to install, each pickup has two wires(Shielded Wire) that need to be soldered, the springs on the pickup board are assembled, make the pickup frame' size to fit your guitar pickguard, then ready to use 8 screws to install in your guitar..
The pickups are passed through a tube amplifier, and the clarity and sustain of the massive strings give the guitar a powerful and forceful sound that is smooth, warm and clear, with great vibrancy..

Check Stock

Cat8 Ethernet Cable, Outdoor&Indoor, 3FT Heavy Duty Direct Burial High Speed 26AWG Cat8 LAN Network Cable 40Gbps, 2000Mhz with Gold Plated RJ45 Connector, Weatherproof for Router/Gaming/Xbox/IP

【S/FTP & Hyper Speed】: Cat8 Ethernet cable is made of 4 shielded foiled twisted pair(S/FTP) and single strand OFC wires(26AWG) which supports bandwidth up to 2000MHz and boosts the speed of data transmission up to 40Gbps. Shielded Cat8 and the improved quality in twisting of the pairs, Cat8 can reduce any signal interference to the full extent. Allow you to stream HD videos, music, surf the net, play games at Hyper Speed..
【Heavy duty & Direct Burial】: The quadruple shielded Cat8 Ethernet cable is super efficient in reducing EMI/RFI Interference and provide highest fidelity for long distance data transmission. With upgraded PVC, Cat8 is waterproofed & anti-corrosion and more durable & flexible for heavy duty work. Can be buried directly . Suitable for both outdoor and indoor use..
【26AWG & Superior Performance】: Comparing with other 32AWG Ethernet cable, 26AWG Cat8 is thicker, a lot faster and stable in data transferring, which is perfectly suitable for AI smart products, like Amazon Alexa, Apple Siri, Google Home, Cloud data Server and other smart home & office products that require high speed & high performance network..
【RJ45 Connectors & Wide Compatibility】: With two shielded RJ45 connectors at both ends, the Cat8 Ethernet cable work....

Check Stock

HiVi-Swans M200MKII WiFi Powered Bluetooth Bookshelf Speakers - CES Award Winner - Portable Studio Speakers Wooden Enclosure - RMS 80 Watts

Passive bookshelf speakers – full-range sound for accurate image and balanced frequency response, this DIY speakers kit with many components that are much more expensive high-end systems. Perfect as rear/side surround home theater speakers for a 5.1, 7.1 or 11.1 setup..
System Type - a two-way fourth order vented bookshelf speakers. Free. Range 43 Hz – 20kHz. Sensitivity 86 dB power 10W – 120W..
Long throw woofer – 6. 5’’Kevlar woofer. Shielded vented Magnet system. Mineral-filled polypropylene Cone..
Dome tweeter – 1” fabric dome, shielded, designed to withstand elevated temperatures. Especially good at reproducing Female vocals..
Easy assemble – with all necessary parts equipped, including speaker cabinets, drivers, screws, wires, acoustic dampening material, grill covers, crossover and other related electronic components. Some tools required..

Check Stock