ReviewsGas Struts

20 inch 40 Lbs Gas Struts Prop Shock C16-08316 C1608316 for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs (Suitable Weight: 30-45 Pounds)

  • 20 inch 40 Pounds gas struts - Extended Length (Center-to-Center): 19.7 in (500mm), Compressed Length: 11.8 in. Force: 40 Pounds Per Strut. End Fiting: 10mm Ball Stud Sockets..
  • 2 struts each package- Suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS. Note: DO NOT Compress them by Hands Before Installing, the Struts could Only be Compressed After Installing Successfully!!!.
  • 20 inch Truck cap lid lift supports - Replaces the following OEM Numbers:C1608316, C16-08316, C1621705, C16-21705, C1622180, C16-22180, SG327005..
  • 20" 40 lb gas shocks - Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
  • NOTE: If the lid weight is less than 32lbs or more than 45 pounds, please choose other pressure struts!.
  • 20" Camper shell window struts -- Most suitable support weight is 30-45 pounds.
  • if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
  • If you find the pressure not fit after installing, DO message us.
Check Stock

C1608054 20\ Gas Prop Spring Strut 20 inch 100 Lb Per Shock C16-08054 for Camper Shell RV Bed Tonneau Cover Storage Box Basement Door Floor Hatch Window Lift Struts (Applicable Lid Weight 85-110LBs)

  • ✅ ARANA 20 inch Gas Struts C1608054 Lift Supports -- 2Pcs Set Force 100 Pounds 445N Gas Shocks , most SUITABLE support weight for 2 STRUTS is 85 lbs - 110 lbs, this means if your project lid is between 85 pounds and 110 pounds, this 100LB gas strut set is SUITABLE!.
  • ✅ ARANA 20 Inch 100 Lbs Gas Spring Shocks -- Extended Length A [in]: 19.7(500mm), Compressed Length B [in]: 11.8(300mm), Interchange number: 6939, 6939S10, C1608054, C16-08054.
  • measurement of the supported lid weight or of your old strut pressure is required to prevent purchasing wrongly!.
  • ✅ C16-08054 Gas Props 20inch -- Direct replacement struts for RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed mattress, queen bed, etc..
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA C1608054 100 lb Lift Supports -- Customer will also use them on tonneau cover, heavy camper shell roof, tv cabinet door, trailer window, compartment door, floor hatch, truck cover, bar shed window, heavy custom build lid, etc.
  • Very Strong, do not buy them for the lid weight less than 80 pounds.
  • ✅100% Satisfaction Service -- 18 Months Support comes with every ARANA product.
Check Stock

VOCOMO Soft Close Lid Support 250N Gas Struts Heavy Duty Hinges Automatic Slow Lowering Safety Pneumatic Lid Lifters Gas Springs 2 Pack

  • Gentle slow close design - Lids will lower slowly and gently to avoid crushing even the smallest of fingers..
  • 250N heavy duty gas struts - A 250N heavy-duty gas struts may be supported maximum 45lbs lid and gently lowered.
  • Lid stay 105 degree open with soft close - The lid stay allows the lid to open at a maximum 105 degree angle..
  • Easy install instruction - Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on either the....
  • No risk purchase - We provide worry-free lifetime warranty(no man-made)and friendly customer service..
Check Stock

20 inch 100 LB Gas Prop Struts Shocks 20' 445N Lift-Support Gas Spring with Mounting Brackets for Heavy Duty Cabinet Tool Box RV Bed Floor Hatch (Suitable Support Weight: 85-110lbs)

  • ✅20 inch gas strut 100lb - Extended Length A (Center-to-Center):19.7"(500mm), compressed length B (Center-to-Center): 11.8"(300mm),Force 445N/100Lb Per Strut, 2 Struts Per Pair.
  • Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction.
  • ✅20 inch gas shocks 100lb - ARANA 20" 100lb shocks will be suitable for heavy lids, with lid weight between 85-110lbs, side length ≥ 32 inch.
  • Note: DO measure the lid weight to avoid buy wrong items.
  • ✅20 inch lift support struts - ARANA 20" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands.
  • ✅20 inch gas springs - ARANA 20 inch 100lb struts are widely used on the indoor/outdoor furniture such as RV bed, motorhome bed, tanning bed, camper bed, travel trailer bed, garbage box, generator house, outdoor bench lid, floor hatch door, ad board, custom-built window, etc, as long as the lid weight is between 85-110 pounds.
  • ✅ About installation & support - once you need any installation guide, welcome to message us for in-time help.
  • if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know!.
Check Stock

C16-08316 C1608316 20' 40 Lbs Gas Struts Prop Shock 20 inch for RV Side Door Motorhome Door Camper Shell Rear Window Tonneau Cover Trap Door TV Cabinet RV Bed, 2Pcs ARANA

  • 20" Camper shell window struts -- 2 struts each package, Extended Length (Center-to-Center): 19.69 in (500mm), Force: 40 Pounds Per Strut, Suitable support weight is from 32 pounds to 45 pounds for 2 STRUTS.
  • 20 inch Truck cap lid lift supports -- [Interchange Part Number] -- Compatible with the following OEM Numbers:C1608316,C16-08316,C1621705,C16-21705,C1622180,C16-22180,SG327005.Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • 20 inch 40 Pound gas struts -- Suitable to use on RV Door, Motorhome Door, Tonneau Cover, TV Cabinet, RV Bed, Trap Door, leer camper shell window, truck cap, etc..
  • NOTE: If the lid weight is less than 32lbs or more than 45 pounds, please choose other pressure struts!!!.
  • 20" 40 lb gas shocks -- Most suitable support weight is 30-45 pounds.
  • if you want to use these struts on other custom-built lids, please measure the lid weight and ensure they are between 30 pounds and 45 pounds.
  • If you find the pressure not fit after installing, DO message us and let us send a new set with proper pressure!.
  • 18-month Support -- If you unluckily encounter with missing parts, broken ball connectors or unfit problem, just click "Ask Seller" ....
Check Stock

27 inch 45 lbs Gas Struts Spring Shocks Replacement Lift Supports for Undercover Bedcover Tonneau Cover, ST270ED1-45 ST270P45EZ10 2Pcs Set

  • ...e with the following OEM Numbers: 190725,IH1214GS,ML2645,ML26-45,ML-26-45,RSIH1212GS,SL2645,SL26-45,SL-2645,SL-26-45,SL26451,SL26-45-1,SL-26451,SL-26-45-1,SL26455,SL26-45-5,SL-26455,SL-26-45-5,st270ed1-45,ST270EDi45,ST270EDi-45,ST270EDI45,ST270EDI-45,ST270P45EZ10,ST270PU45,ST270PU-45.
  • ✅ ARANA 27 inch 45 Pound GAS STRUTS could be used as the replacement parts of the tonneau cover undercover bedcover for Pickup Truck, easy to install without any special tools required.
  • Note: DO NOT compress them by hands before installing, the struts could only be compressed after installing successfully!!!.
  • ✅ ARANA 27" 45lb GAS LIFT SUPPORTS extended Length from Center Mount to Center Mount is 27 inch, 10mm Nylon End, please measure your old struts at first before purchasing.
  • NOTE: If the lid weight is less than 35lbs or more than 50 pounds, please choose other pressure struts!!!.
  • ✅ Package content: 2× Shocks, 4× Ball studs, 1× Installation Guide are included in each set.
  • If any missing, please message us for new package directly.
  • ✅ Other Applications: ARANA 27" 45LB gas shocks could also be used on other DIY applications.
  • please confirm the lid weight between 35 and 50 pounds, if you are need installation guide, click ASK SELLER besides your order from us....
Check Stock

ARANA 15 inch Lift Support Struts Gas Spring Shocks 300 N/67 LB Per Prop for RV Bed Floor Hatch Trap Door TV Cabinet Heavy Duty Box Lid Window Camper Shell with L Mounts 2Pcs (Support Weight 55-75lb)

  • ✅15 inch gas strut 67lb - Extended Length A (Center-to-Center):14.96 inch (380 mm), compressed length B (Center-to-Center): 9.02 inch (229 mm),Force 300 N/67Lb Per Strut, 2 Struts Per Pair.
  • Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction.
  • ✅15 inch gas shocks 67lb - ARANA 15" 67lb shocks will be suitable for heavy lids, with lid weight between 55-75lbs, side length ≥ 25 inch.
  • Note: DO measure the lid weight to avoid buy wrong items.
  • ✅ 15 inch lift support struts - ARANA 15" struts are designed with L type mounting brackets, all the ball ends and brackets could be unscrewed and rotated to suit for different installation demands.
  • ✅ 15 inch gas springs - ARANA 15 inch 67lb struts are widely used on ttrap door, cellar door, floor hatch door, boat deck, teardrop trailer, rv bed, camper bed, murphy bed, heavy RV compartment door, heavy crawl space door, roof access hatch, TV cabinet, queen bed, wood surface, as long as the lid weight is between 55-75 pounds.
  • ✅ About installation & support - once you need any installation guide, welcome to message us for in-time help.
  • if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know!.
Check Stock

2Pcs C1604154 15' Lift Supports Gas Prop Struts Force 24 Lb/107N Per Shock Spring Dampers for Truck Topper Snugtop Cover Camper Shell Window Tractor Hood Tool Box Cabinet Lid DIY House Door

  • [Function] -- This Set of 2pcs gas prop struts shocks could be used as the replacement struts or DIY modification struts for ARE ATC Snugtop Canopy Leer Camper Shell Window Truck Topper Cap and Home-built Cabinet House Lid.
  • [Specification] -- Pair (2 total) of 24 pound (each) gas struts.
  • Force: 24 lbs/214 N per shock, 48 lb/428 N per set.
  • Extended Length A [in]: 14.45 (between two holes), Compressed Length B [in]: 8.98 (between two holes).
  • [How to Contact us?] -- If you have any issues about the product quality, fitment or missing parts, click "ASK SELLER" besides your order from us, best solution will be offered directly within 24 hours, without returning the package to us!.
  • [Application Range] -- Measurement needed first for the size of your old struts! If your application weighs about 10-15lbs, one shock will hold perfectly.
  • if your application weighs about 18-26lbs, you could install two shocks, adjust the mounting point on the lid 0.79inch towards/opposite to the hinge direction could change the lift pressure to weaker/stronger!.
  • [Installation] -- Exact fit original equipment design ensures easy installation.
  • if you want to install them on DIY builds, you need to buy mounting bracket.
Check Stock

2 Truck Upfitters 16' Gas Props (15.7' ext, 9.4' Compressed, 55 lbs of Pressure ea) Compatible with are, ATC, Snugtop, Leer Campers. Measurement REQ'D! Incl 4 Ball mounts+Angled & Straight Fittings!

  • ...sure the door gas strut that you are replacing. Measure from the CENTER of the gas prop head (little plastic end), to the other side. DO NOT measure from the end of the gas prop, your measurement will be too long. Note that most applications allow for 1-5% size variation..
  • Truck Upfitters Pair of 55 pound (each) gas struts. 15.7" extended length and 9.4" compressed length. This size of door shock absorber is for tall medium/heavy weight rear or side camper shell doors. Each canopy shock has 55 lbs of pressure, for a total of 110 lbs of pressure. Please note that this does not mean that it can lift something that is 110 lbs. the typical hinged-style door weight for this prop is approximately 70-90 lbs, including the weight of the camper shell locks and keys..
  • These gas lift cylinders do not fit all camper shell brands / models. Measure your strut from center of socket to center of socket when fully opened & fully closed to get accurate measurement. Please see pictures to determine how to measure. Do NOT measure from end to end. Measurement must be from the center of plastic ball mount on each end of the gas spring lift. Measurement is important to ensure they open properly and get a good camper shell seal against the camper shell gasket when closed..
Check Stock

ARANA 7 inch 18 lb/80 N Gas Struts Spring Shocks Lid Stay Hinge, 7" 80N Gas Props Struts for Cabinet Toolbox Lid Utility Job Toy Tool Box with Ball Studs

  • ✅ 7 inch gas spring struts - Extended Length: 7"(180mm), Compressed Length: 5.12"(130mm), Package include: 2 struts, 4 mounting brackets and 10 Screws. No need to buy other mounting hardware.
  • ✅7 inch 18lb lift support hinges - Perfect soft open close gas struts for cabinets, tool box, toy box, job box, utility box, display table, etc..
  • please make sure your lid weighs between 14 and 20 pounds.
  • ✅ 7 inch gas spring shocks for cabinets - The lid stay can help your cabinet door/toolbox/toy box/storage box open or close slowly and softly and keep it up..
  • ✅7" 18lb lid stay shocks - A pair of 7 inch shocks in per package, suits for the lid length ＜21".
  • 18lb per shock, if your lid weighs 18 pounds, you could buy a pair of this 18 lb shocks.
  • ✅18 Months Support-- If any questions or dissatisfactions before/after purchasing or need installing/using guide, please message ARANA directly to let us provide in-time assistance to you!.
Check Stock

Gas Spring Gas Strut Gas Shocks Soft Close Hinges Toy Box Hinges Lift Supports Lid Support Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring Pressure 120N/26lb/12KG[2 Pack]

  • ★ Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one....
  • ★Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is....
  • ★Suitable for Gas Strut, Gas Spring, Lid Support, Gas Shocks, Lift Support, Lid Stay, Heavy Duty Kitchen Cabinet Doors, RV Overhead Cabinet Doors,....
  • Length ( hole center to hole center) :9-11/16''.
  • Travel:3-14/25'' ,Distance between ball mounts compressed:....
  • ★ 1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping....
Check Stock