ReviewsGas Turbine Meter

BTMETER BT-5800G Ammonia Gas Detector Sensor, Test for 0~100 PPM Nh3 Monitor Gauge with Temperature Humidity Tester

✅【High Range Ammonia Gas Detector】Measures ammonia gas 0 ~ 100 PPM, ammonia gas resolution 0.1 PPM, accuracy +/- 2%. Measures ambient temperature from -10 ~ 50 ℃, ℃/℉ switchable.
✅【Ammonia & Temp & Humidity Meter】In a humid, warm environment, ammonia gas is produced faster.Therefore, while detecting ammonia gas, you should also keeping track of the temperature (℃/℉) and humidity..
✅【Tripod Hole for Mounting】Assembled with electrochemical cell sensor for sensitive measurement. With a tripod mount port so you can mount the meter and have it measure ammonia (NH3) Gas Density continuously, keep track of the gas changing in the same spot. Perfect ammonia air detector for poultry farms, horse stables, livestock.
✅【Rechargeable Ammonia Air Gauge】The included USB cable can be connected to the plug for charging. Built with green / red charging indicator light. Remaining power indicator, Auto / Manual power off optional to save your battery..
✅【Alarm Indicator Light】AL1 and AL2 alarm limit values are adjustable. Slow light flash and buzzer indicates alarm level “AL1” reached, Rapid light flash and buzzer indicates alarm level “AL2” reached.This handheld Ammonia detector portable and comes with storage case for testin....

Check Stock

WORX 20V Turbine Cordless Two-Speed Leaf Blower Power Share - WG547 (Battery & Charger Included)

[TURBINE FAN TECH] Worx engineers figured out how to get a jet engine-type motor inside of a leaf blower. Super powerful, yet not so loud that you’ll think it’s getting ready for takeoff.
[2 SPEEDS FOR DIFFERENT JOBS] Go slow for pavement or tight corners. Switch to speed 2 on the open lawn and see what 75 mph of Turbine blowing power can do.
[SAME BATTERY, EXPANDABLE POWER] The same battery powers over 75+ 20V, 40V, and 80V lifestyle, garden, and power tools in the Power Share family.
[A WIDE, STRONG STREAM OF AIR] 360 CFM (Cubic Feet per Minute) come streaming out of this wide-mouth tube. That’s high-capacity air volume, so you clear your property in fewer passes and with less leg work.
[ONE-HANDED OPERATION] With all that power, the Turbine is designed to be controlled with just one hand. It’s only 4.9 lbs., and the ergonomic design funnels the wind in a way that’s easy to handle.
[GREEN AND MEAN] No gas and no cord plugged into the wall. Rechargeable, battery-powered tools are friendlier on the environment, more cost-effective, and more convenient. And they don’t skimp on power.
[COMFORTABLE CONTROL GRIP] The rubber overmold handle absorbs vibration and reduces hand fatigue, so you can get more done with less strain.

Check Stock

Oxygen Gas Liter Flow Meter Measures 0-8LPM by Tina's Homecare

The Oxygen Liter Meter is a small, lightweight device that can be used to quickly verify the flow of gas..
Reads 0-8 liters per minute by just attaching your supply line to the bottom and holding in the upright vertical position and locating the center of the ball..
This is a great way to verify your home oxygen equipment is accurately dispensing the proper amount of oxygen!.
The Liter Meter is only to be used for a quick assessment of the flow of gas from your oxygen concentrator or regulator. Please note this device only verifies the flow and not the quality or purity of the gas..

Check Stock

Dual Output Argon/CO2 Gas Regulator Flow Meter for TIG MIG Welding 10-60 SFCH 0-4500 PSI CGA 580 Inlet Connection 5/8 x 18 RH Outlet Fitting

【CGA-580 Bottle Inlet Connection】The CGA-580 Bottle Connection fits standard argon, helium, nitrogen, and argon/CO2 style gas bottles from any....
【Outlet Connection】The welding gas regulator applicable for female 9/16" x 18 nut or male 5/8" x 18 fitting, equipped with 1/4" Hose barbed....
【Precise &Fast】0-4500 PSI. The high pressure gauge allows you to view how much gas is left in the argon cylinder.The CO2 flow meter is adjustable....
【Premium Quality】The argon gas flow meter is made of high-quality brass, and strict tested to guarantee long life. It can greatly prevent gas....
【Perfect for MIG and TIG Welding 】The Argon CO2 welding regulator compatible with kinds of gases, it will be an economic alternative for demanding....

Check Stock

testo 300 I Residential and Commercial Combustion Analyzer Kit & 510 Digital Manometer I Dual-Port Differential Pressure Meter for air Conditioning Systems and Ventilation ducts

Product 1: Efficient: The combustion testing tool reliably measures the carbon monoxide and O2 level of furnaces and boilers, as well as temperature, draft and differential pressure.
Product 1: Durable: The flue gas meter is equipped with an extremely sensitive CO and O2 sensor with up to 6 years of life expectancy and a measuring range up to 4,000 ppm.
Product 1: Easy application: Start measuring from standby mode at the touch of a button. Extra strong magnets at the back of the meter enable a hands free and secure measuring operation.
Product 1: Intuitive: Thanks to the large HD smart touch display with a clearly structured measurement menu, the flue gas detector offers all measurements at one glance.
Product 2: Versatile: The testo 510 measures differential pressure, total external static pressure, manifold pressure and duct velocities, making it ideal for HVAC/R field servicing technicians.
Product 2: Precise measurements: Thanks to the temperature and air density compensated pressure sensor, the air pressure meter delivers accurate data for ten different measurement units.
Product 2: Always ready: The backlist display, in conjunction with its intuitive design and magnets on the back, allow for a convenient application of the compact digital pressure g....

Check Stock

Exell 2.4-Volt Nickel-Cadmium Battery, EBC-GAS1, 750 mAh for Combustible Gas Detectors: 405421, 405421-00, 405421-000, 405421100, 8806A, ANIC0286, NABC 405421100 TIF: 8800, 8800A, 8806A, 8850, NP5459

GAS METER BATTERY: The EBC-GAS1 is the ideal battery to power your TIF 8800, TIF 8806, or 8850 combustible gas detector. It's a battery that you can trust for long-lasting and efficient power..
HIGH-QUALITY BATTERY: Made with nickel oxide hydroxide and metallic cadmium, these rechargeable batteries boast an output voltage of 2.4V and an amperage of 750 mAh. They're high-quality batteries that are built to last..
RECHARGEABLE BATTERIES PACK: These batteries provide a long shelf life and can be recharged. Keep your home or workplace safe with a gas meter that is always powered to detect a toxic or flammable gas leak..
CROSS-REFERENCE: Before ordering this battery backup pack, be sure to check that the intended product is compatible with the battery's chemistry, size, amperage, polarity, and voltage..
TRUSTWORTHY BATTERIES: This battery pack delivers effective power for natural gas detectors in your home, workplace, and more. Trust this high-quality battery to power your TIF 8850, TIF 8800 gas detector, and other combustible gas detection tools..

Check Stock

GasOne 2 Pack Propane Tank Gauge Level Indicator Leak Detector Gas Pressure Meter for RV Camper, Cylinder, BBQ Gas Grill, Heater and More Appliances-Type 1 Connection

3 PC OF GAS ONE PROPANE GAUGE - NO MORE GUESSING GAMES, The days of having to guess how much propane is left in your tank are over. Gas One’s Propane Gauge allows for users to see how much fuel they have left in an instant. Installed with three levels of indication and a meter to show the level of propane left in your container.
UNIVERSAL FITTING CONNECTION - Gas One’s Propane Gauge has a universal fitting (QCC-1) made for standardized 5-20lb propane gas tanks. An easy to install connection for the purpose of reading an accurate propane level.
SOLID BRASS CONNECTION - Built with a solid brass construction to ensure a sturdy and durable connection, with sufficient heat resistance.
EASY HASSLE-FREE CONECTION - Ready to use right out the box, just simply attach Gas One’s Propane Gauge on to your standard propane tank and it’s ready for use.
EASY TO READ, COLORED INDICATOR - Gas One’s Propane Gauge has a meter that reacts to the pressure of the propane tank. There are three-built-in indicator levels labeled “Refill, Low Gas, Gas” to ensure an easy and accurate reading.

Check Stock

Watts VAGV075 3/4 Inch Earthquake Gas Shutoff Valve

WATTS EARTHQUAKE GAS SHUT OFF VALVE: Automatically shuts of gas in the event of an earthquake..
NATURAL GAS EARTHQUAKE SHUT OFF VALVE: Reduce property destruction from earthquake related gas fires..
EASY TO INSTALL GAS METER EARTHQUAKE SHUT OFF VALVE: Save time and energy during installation due to its lightweight, compact design..
BEST SELLING EARTHQUAKE SHUT OFF GAS VALVE: Maximum pressure is 10 PSI, fits standard NPT..

Check Stock

Carbon Monoxide Meter Detector, Handheld CO Detector, Portable CO Gas Leak Detector, Gas Analyzer, High Precision Detector, CO Gas Monitor Tester 0～1000ppm for Home, Tunnels, Steel Works Wait

✅【HIGH QUALITY CO DETECTOR】The carbon monoxide detector is a device that detects the presence of carbon monoxide gas in an area, usually as part of a safety system that carbon monoxide meter handheld can accurately monitor the surrounding environment and is used to detect carbon monoxide gas leaks and remind the operator to take relevant measures..
✅【ACCURACY AND DURABILITY】 This handheld carbon monoxide detector is equipped with an LED Backlit screen that can easily handle environments such as darkness, making it easy to read and freeing you from the constraints of time and place. Carbon monoxide meter is made of high tenacity ABS engineering plastic, which is wear-resistant and stable, with low power consumption and high accuracy..
✅【MULTI-FUNCTIONAL】The carbon monoxide meter handheld concentration alarm value can be set freely. Carbon monoxide tester will also sound an alarm when the carbon monoxide gas concentration is at a low danger value, and will automatically shut off without any operation within 10 minutes. Portable carbon monoxide detector has a wide measurement range and can carbon monoxide detectors be switched to 2 temperature units (°C and °F) is very practical..
✅【WIDELY APPLICABLE】The digital carbon monoxide de....

Check Stock

Aramox Turbo Boost Pressure Meter for 12V Car, Universal Turbo Boost Gauge Pressure Meter 0‑200 Kpa LED Backlight 60mm/2.5in Dia

Suitable for：Universal turbo boost meter suitable for most 12V cars, easy to install with equipped mounting accessories.
Easy to Operate：Sturdy stainless steel housing ensures long durability, lightweight yet reliable, portable and easy to operate.I like the size and bright colors on the display. The installation is easy and works very well. Responds great to boost pressure when engaged..
Stainless Steel Material：Sturdy stainless steel housing ensures long durability, lightweight yet reliable, portable and easy to operate..
Adaptability: The universal turbocharger meter is suitable for most 12V cars. Perfect design and fine workmanship, ligthweight, ensures high compatibility and perfect fitting..
Easy to Use & Easy to Install: The turbocharger instrument is convenient and practical to use, can confirm whether the turbine is in normal condition, and is easy to install with the equipped installation accessories..

Check Stock

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.

Check Stock