ReviewsGas Welding Filler Rods

100Pcs Flux Core Welding Wire Aluminum Welding Rods 550℃/1022℉ Aluminum Brazing Rods Solution Welding Flux-Cored Rods for Samll Projects (1/16''x13'')

ONLY FOR WELDING ALUMINUM - The Aluminum welding flux-cored rods are suitable for welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good forgeability & good corrosion resistance..
NO SOLDER POWDER NEEDED - The aluminum brazing rods don't need to use other flux powder while repairing aluminum..
HIGH QUALITY MATERIAL - The low temperature aluminum welding rods are made of premium nontoxic, odorless and durable aluminum..
APPLICATION - The flux core welding rods are used for welding and filling material for pure aluminum small projects, connection with aluminum bus and guide rod of electrolytic aluminum plant and electric power, chemistry and so on. The melting piont of solution welding flux-cored rods is 550℃(1022℉) ..
WARRANTY -- guangfan provide this product have 3-month warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..

Check Stock

SÜA - RBCuZn-C - Low-Fuming Bronze Brazing Rod - Flux Coated - 18 x 1/16 - 1/2 Lb - 24 Rods

LFBF (Fluxcoated low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as....
A “must have” filler metal for every machine shop, LFBF is excellent for building up wearing surfaces or large areas where successive layers must....
READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
Available in different sizes: 1/16", 3/32"and 1/8". Rod Length: 18" for easier maneuverability while welding since flux coated rods cannot be bend.....
Available in different package weights: 1/2 Lb, 1 Lb, 2 Lb and 5 Lb - Choose rod diameter and package quantity from the menu..

Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....

Check Stock

100PCS Aluminum Welding Rods Low Temp Easy Melt Aluminum Welding Wire Flux Core-Only Wuitable for Welding Aluminium (0.16 x 33cm/0.06 x 13in)

【NO SOLDER POWDER NEEDED】The aluminum welding rods are flux cored welding rods,so there is no need to use other flux powder..
【HIGH QUALITY MATERIAL】The aluminum welding rods with flux are made of aluminum material, nontoxic, odorless and durable material..
【PERFECT WELDING EFFECT】The aluminum welding wire for propane torch are designed with full & smooth welding effect because the item comes with internal powder, great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance..
【NOTES】The solution welding flux-core rods are only suitable for argon arc welding or surfacing welding aluminum, aluminum alloy, aluminum-magnesium alloy and other white metals with high strength, good for geability & good corrosion resistance..
【WARRANTY 】If you have any problems with it or questions, please contact us and we will respond in time. We're standing by to assist you all the time. Your satisfaction is our first priority..

Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

Check Stock

VEVOR TIG Welder 3 in 1, 110V High Frequency TIG/Stick/Clean Welding Machine w/IGBT Inverter, 155Amp Digital Arc Welder

High-performing 3-in-1 TIG Welder: Our welder machine has HF TIG, ARC, and a clean mode. It also comes with a TIG torch. The arc success rate of the TIG is 100%. The TIG and hand MMA welding provide an easy arc start, stable current, minimum spatter, and good shaping. Get clean and beautiful welding easily by using clean mode after welding..
Safety First & Overheat Protection: The unique air channel design increases the heat dissipation of the power device and control circuits. It also extends the welding time drastically. The IGBT inverter will greatly improve the performance and reliability of the 3 in 1 welder. The outstanding 60% duty cycle can also ensure long-time welding. What are you waiting for? Get ready to feel the difference!.
Easy-to-use Panels and Functions: The setup is marked clearly by a name and graphic representation of each knob’s function. The 2T/4T switch is available to add convenience. A gas shield set makes your welds pristine. It is simple to operate for both beginners and skilled welders..
Suitable Welding Thickness: Delivers a 155A current output, making the welder machine suitable for welding stainless steel, iron, mild steel, copper, and nickel. (The maximum welding thickness is 0.1″/3 mm.). Whether you are a hobbyist, ....

Check Stock

Fox Alloy 20pcs Copper Brazing Rods BCuP-2 (5/64\) 2mm Phosphor Round Self Fluxing Copper Welding Rods Sticks TIG Arc Pipes for Air Conditioner Refrigerators

Material: The package includes 20PCS 2.0mm cooper brazing rods BCuP-2 brass welding rod.
Standard: The copper welding rods kit conforms to AWS A5.8.
Advantage: The low temperature phosphor copper welding rod is easy to install and remove. Good fluidity during welding, can flow into small space. Low metling point 640-770℃, good fluidity during welding, molten metal can flow to small gaps.
Application：The stick TIG welding rods is used for brazing of copper & copper alloy in motors, air-conditioners, meters, and refrigeration industry.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions..

Check Stock

LDHTHOPI MIG Welder, 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder

【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with function switching, voltage control knob and wire speed adjustment knob. With synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. And the smart digital display makes the operation easier for you..
【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-160A. Duty cycle: 45%-160A at 40 °C. It adopts the advanced IGBT inverter technology with excellent arc stability. Suitable for welding carbon steel, iron, stainless steel, and other metals. Machine with current display can read the current and voltage. The MIG mode can select flux cored welding wire in 0.024"(0.8mm) and 0.03'(0.9mm), ARC(Stick/MMA) mode fits rods..
【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The welders will automatically shut down when overheated and overload. Also machine energy-saving and Fan cooling system will works when needed, reduce the dust into machine also provide long life us....

Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..

Check Stock

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

Forney 49250 Square Aluminum Tubing, 3/4" x 3/4" x 1/16" x 3'

Suitable for most light and medium duty projects.
Can be welded using Forney or similar aluminum mig wire, arc rod, or gas welding specialty rods.

Check Stock