ReviewsGauge Port Condensate Pump

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....

Check Stock

The Prophecy Vol. 2

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor.
CSA certified to US and Canadian standards.
PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
maximum water temperature: 140 F, equipped with safety switch.

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-140PSI, Universal for Auto Truck SUV Motorcycle ATV RV

FITMENT TYPE FOR JIFETOR FUEL PRESSURE GAUGE KIT: The car fuel pressure tester kit is suitable for most vehicles with gasoline/gas engine fuel injection pump system (except for Bosch, CIS Jetronic, Throttle Body Systems on GM vehicles), not for diesel high pressure injection pump or direct-injection engine, due to the fuel gauge's low pressure range. Testing fuel pressure is an essential part of the troubleshooting process of fuel injection system..
CONNECTIONS FOR TU-114 FUEL PRESSURE GAUGE TOOL KIT: The fuel pressure test gauge set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard schrader valve on fuel pump, 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee help to splice in-line between the fuel pump and engine for most vehicles..
FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 3-1/2" large dial with 0-140psi/0-10bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16"L fuel drain hose help to re....

Check Stock

BACOENG Professional Vacuum Pump & Manifold Gauge Set - HVAC A/C Refrigeration Kit - Diagnostic R12 R22 R134a R410A - w/ Case

Professional 4 Valve Manifold Set, Diagnostic R134A, R410A and R22 systems. No additional adapters required. Designed for rapid testing, charging and evacuation..
Compact but powerful vacuum pump delivers 3.6 CFM flow rate and 150 Micron vacuum. Cast aluminum housings make the pump lightweight while durable.Thermally protected is good for long time duty..
Blue Gauge (low): 0-550 PSI, Red Gauge (high): 0-750 PSI, Burst pressure: 4000PSI, Max working pressure: 800PSI.
Fahrenheit degree unit with easy to read instrument panel..
Red, Yellow, Blue 5Ft charging hose with 1/4″ Port.
Black charging hose with 1/4″ to 5/16″ Port.
Red = high pressure, Blue = low pressure, Yellow = refrigerant bottle, Black = vacuum pump..
INCLUDE: 1 × 4 way manifold, 1 × vacuum pump, 4 × charging hoses, 2 × adjustable quick couplers, 1 × universal can tap, 3 × adapters, 1 × valve core wrench, 1 × vacuum pump oil, 1 × detailed manual, 1 × toolbag, 1 × hose repair kit.

Check Stock

The Friendly Swede Sports Ball Pump 3 Pack Needles and Nozzles Included Blue + Green + Red

【Automatic Electric Air Compressor】Morpilot electric ball pump with intelligent pressure detection and stop function, just chose the correct ball....
【Electric Ball Pump with Pressure Gauge】Morpilot's intelligent basketball pump, built-in digital pressure gauge, intelligent automatic pressure....
【Electric Air pump for Balls】 Air volume:4L/M:1-2mins finish inflating, don't delay the game with unnecessary pumping, just have a break and let....
【Multifunction & Portable Electric Soccer Ball Pump】 SIZE :16* 3.6cm, fits easily in your bag or pocket, Morpilot's take anywhere air pump keeps....
【USB Charged Pump】Morpilot's portable lithium battery charging design is compatible with any charger or equipment with a USB port. inflates up to....

Check Stock

PumpSpy Automatic Condensate Pump - 173 GPH 1/20 HP - With Safety Switch and 20’ Tubing for HVAC, Dehumidifier, Furnace, Air Conditioner

Automatically detects and removes condensation from dehumidifiers, furnace, or AC - Condensate pump with a 1/20 HP high-performance motor that creates up to 18 feet of lift.
High-quality condensate pump for air conditioner, dehumidifier, or furnace.
Built-in safety switch that shuts off the connected unit’s power if the reservoir tank reaches an unsafe level.

Check Stock

BACOENG 3 Gallon Stainless Steel Resin Trap Vacuum Degassing Chamber (3 Gallon/1.2 QT/2 QT Available)

Resin traps come complete with glycerin-filled vacuum gauge, fittings for use with 1/4" vacuum tubing,brass ball valve and instruction manual..
Capture excess resin and protect your pump! Measuring range of vacuum gauge：0-29.25inHg.
Unique Catch Port Design: An additional hose can be installed at the port inside the tank to facilitate accurate collection of resin..
5 Feet Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4" SAE..
Silicone gasket to be used over 10,000 times without deterioration..

Check Stock

Little Giant VCL-24ULS 115 Volt, 1/18 HP, 270 GPH, Automatic Condensate Removal Pump with 1-Gallon Tank and Safety Switch, 6-Ft. Cord, Black, 553211

LARGE TANK CONDENSATE PUMP: Little Giant VCL-24ULS (553201) 1/18HP Condensate removal pump features safety switch, 1-gallon ABS plastic tank and 6-ft. power cord.
PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
CONSTRUCTION: ABS pump housing, switch housing and tank.
HIGH PERFORMANCE MOTOR: 115 Volt, 1/18 HP, thermally protected, fan-cooled concentric motor with stainless steel motor shaft, 60 Hz, 2.5 Amps, 148 Watts.
SPECIFICATIONS: 1/4-inch FNPT x 3/8-inch O.D. barbed discharge suitable for 3/8-inch I.D. vinyl tubing.
270 GPH at 1-ft. lift, 10.4 PSI, 6-ft. cord with 115-Volt plug.

Check Stock

HVAC Premium Condensate Removal Pump – Tank Pump 1.1L RTP15WS115L with 3/8' x 15' Pipe – Automatic Safety Switch Sensor - 115V/60HZ

HVAC Condensate Removal Pump With Automatic Switch – Automatically scans, detects, and collects/removes the condensate from HVAC or Air Conditioning Equipment, dehumidifiers, furnaces, condensing boilers, and virtually anywhere a condensing pump is necessary. Suitable for Ducted Units.
Pump Gallon is made of Flame Retardant ABS plastic, Motor Shaft is made of High Quality Flame Retardant Metal that does not corrode, and the Tank Cover is also made of High Quality Flame Retardant Metal.
Pump includes Automatic Safety Switch which can be wired to an alarm to warn of possible tank overflow.
Voltage is 115V/60Hz – See below in description for all TECHNICAL SPECIFICATIONS.
100% Satisfaction Guaranteed – Don’t worry you’re covered by our 100% money back guarantee no questions asked..

Check Stock

Dayton 1TDT2 Blower, 549 CFM, 115V, 2.05 Amp, 1640 RPM

AUTOMATIC CONDENSATE PUMP: features a vertical-type switch to reduce footprint and is designed to automatically remove condensate produced by boilers, furnaces, air conditioners and de-humidifiers.
HIGH PERFORMANCE MOTOR: 1/30 HP, 1.5 Amps, 93 Watts, 115 Volts, 60 Hz, thermally protected, fan-cooled motor.
BUILT TO LAST: stainless steel motor shaft, thermal overload protected motor.
CSA certified to US and Canadian standards.
PUMP WITH SAFETY SWITCH: can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
SPECIFICATIONS: 3/8-inch OD barbed discharge, 80 GPH at 1-foot head, 20-foot shut-off, up to 8.7 PSI, 3 inlet drain holes, 6-foot cord.
maximum water temperature: 140 F, equipped with safety switch.

Check Stock

Little Giant VCMA-15ULS Series 1/50 HP 1/2 Gallon Tank Condensate Removal Pump

For removal of condensate from an air conditioner, suitable for high efficiency, gas furnace condensation, and condensing boilers.

Check Stock