ReviewsGauge Swatch Measurement

GemRed Digital Depth Gauge , Height Gauge with LCD Display, Woodworking Tool for Router Table (Black&Red)

【Accurate Data】 The GemRed Depth Gauge applies Absolute Depth Sensor , to ensure the accuracy of data up to 0.1mm/0.004’’, resolution is 0.05mm/0.002’’. ☆Measure range:0~80mm (0~3 1/8" ).
【Locking Function &Magnetic】 The Locking screw can help to lock the ruler to maintain the measurement. With free standing magnetic feet, vertical measurement of Height Gauge is more accurate..
【inches/millimeters】The measured values can also be converted between inches and millimeters to meet the user's various habits..
【Large LCD Display】 Quickly and Clearly read horizontally and vertically. Applicable to manual router and router table..
【Muti-Function】 3 in1-Height measurement/ Plunger-hole / Slot depth measurement. POINTER: On one of the legs and can be clipped to the ruler to accurately check any holes, mortices, or slots up to 50.8mm deep..

Check Stock

AWELTEC Digital Tire Pressure Gauge 150 PSI 4 Settings Tire Gauge for Car Truck Motorcycle Bicycle with Backlit LCD and Non-Slip Grip Red

FAST & ACCURATE - With AWELTEC Digital Tire Pressure Gauge, it provides fast, accurate and reliable tire pressure measurement immediately using LCD....
PORTABLE - With its modern, light and portable design, AWELTEC Digital Tire Pressure Gauge offers precise pressure value measurement and bright....
HELPFUL - Designed to maintain correct tire pressure, reduce tire wear and extend tire life. Increase fuel efficiency, improve vehicle handling and....
4 SETTING - AWELTEC Digital Tire Pressure Gauge is available for 4 setting: PSI: 4-150, Bar : 0-10, KPA : 0-1000, Kgf/cm : 0-10. Minimum measurable....
EASY USAGE - Simply press the button to turn on and AWELTEC Digital Tire Pressure Gauge is to immediately measure the tire pressure. With....

Check Stock

Stair Tread Template Tool, Stainless Stair Tread Gauge Tool Shelf Stair Jig Layout Tool Box, Measuring Gauge Range 10.2in to 53.3in, Suitable for Complex Stair Treads by AnoleX

...mplate tool provides the greatest help when you install the stairs, it can measure the length and width of the stair treads, and it can also measure the rotation angle of the spiral staircase. In addition, this stair gauge can also be used for deck floors, wall frames, window sills, shelves, closets, partitions for measurement and angle placement..
【Flexible Use】Stair tread gauge tool with three sizes of 8&12&16 inches extension rod, can slide and adjust in the range of 10.2 to 53.3 inches. The 10 inch stainless steel plates on both sides with scale and angle measurement (0° to 360°) can be combined and stretched arbitrarily according to your needs to meet the measurement of different corners. The stair ruler is easily adjusted and securely locked in place with four knobs..
【Sturdy Material】The stair measurement tool is made of 304 stainless steel scale plate and is covered with chemical-resistant environmentally friendly coating materials, which can effectively prevent moisture or rust, and it will not wear for a long time, and it is strong and durable..
【Precise and clear scale】The clear radium engraving on the surface of the stair tread and shelf gauge will not fade after long-term use. All scales are strictly inspected and calibrated b....

Check Stock

Sike MR-210 Professional Aluminum Telescopic Height Measuring Rod, Wall Mounted Stadiometer

Heavy gauge aluminum. For adult or pediatric patients..
Precision engineered and constructed of heavy gauge aluminum, the SIKE MR-210 Mechanical Height Rod will deliver accurate height readings for years and years.
Flip the measurement arm up and slide the height measurement arm into position.
The patient’s height is highlighted with an easy-to-read, bright red line.

Check Stock

ZUZUAN 1 Pack Feeler Gauge with 32-Blade and 1 Pack Offset Feeler Gauge with 16-Blade, Gauge Dual Marked Metric and Imperial Gap Measuring Tool

...d has higher strength than stainless steel, features high precision and hardness, good elasticity and wear resistance..
✔Easy to identify: metric and imperial double marking, laser technology etched out the size of the number, in light at a glance its specifications, easy to identify..
✔Feeler Gauge with 32-Blade Measurement: 0.0015 inch to 0.035 inch(0.04 mm to 0.88 mm), please see the second picture for size details.Offset Feeler Gauge with 16-Blade Measurement: 0.005 inch to 0.020 inch (0.127 mm to 0.508 mm), please see the third picture for size details..
✔Unique Design: The blades are bound within a chromed-blade protector to prevent loss of individual blades, designed with a thumb notch for easy selection and expansion, and it can be moved 360 degrees and disassembled if you want to use one alone..
✔NOTICE:This product is a feeler gauge, used to measure the size of the gap spacing. If you need to measure the thickness of some articles, you can buy the wire diameter gauge of our shop, which has the supporting thickness gauge. Thank you for your cooperation..

Check Stock

VMV-1 Digital Vacuum Gauge,0-30000 Microns Range, 2% Accuracy, 7/16-20UNF Interface

【Measuring Range】 The dual scale pointer pressure gauge uses three times the scale (PSI / Bar / KPa) to measure pressure, does not require batteries, and can meet your different needs. Measuring range: 0-300psi, 0-2000kpa, 0-20bar..
【Accurate Measurement】 The dual-scale pointer pressure gauge can measure pressure without a battery. Good airtightness ensures accurate pressure measurement. The transparent dial cover and pointer display dial make reading more convenient..
【Application】 The pressure gauge is an excellent pressure measuring tool with stable performance, which can be used to measure the pressure of water, oil, natural gas, and liquids. Stable performance, high reliability, easy to use and practical..
【Size】 The pressure gauge measures approximately 11.3 x 9 x 3.2 cm/4.4 x 3.5 x 1.3 inches and weighs approximately 188 grams/6.6 ounces. Small size and easy to carry..
【Easy to Install】In order to maintain the normal performance of the overflow hole, please leave a space of at least 10mm behind the work surface. Do not modify or block the overflow hole..

Check Stock

Vibrometer Digital Split Type Vibration Meter LCD Displays Acceleration Sensor Gauge Handheld Vibration Analyzer Grey

TWO TEMPERATURE UNITS: It can measure the environment temperature with 2 temperature units (℃ and ℉), temperature measurement 0℃ - 60℃, temperature accuracy is ±2℃.
MEASURING RANGE: Digital vibration tester has wide measurement range of acceleration: 0.1~199.9m/s2 peak, vibration acquisition is piezoceramic accelerometer.
FUNCTION: Vibration gauge analyzer adopts piezoelectric acceleration transducer transfer the vibration signal in to electrical signal, analyze the input signals, and show the vibration speed, acceleration, displacement, can meet your different using need.
LCD DISPLAY: Vibrometer gauge LCD displays measurement result and conditions directly, three and a half digit display, clear display for easy reading.
APPLICATION: Vibration analyzer tester is widely used in mechanical manufacturing, electric power, chemical engineering, space flight and aviation and other fields.

Check Stock

Frienda 4 Pieces Capacity Rain Gauge Glass Tube Replacement Rainfall Test Tube with Scale for Yard Garden Outdoor Home (4 Pieces,7 Inch)

...u to make sure your plants are getting enough water to flourish, ideal for monitoring the precipitation, practical rain gauge for flower in your garden or rows of crops on a farm, keeping your plants well nourished.
Easy to read: made of glass with clear calibration, these rainfall test tube can provide precise rain measurement, the calibration will not rub easily, easy to read and convenient to apply, making rain measurement work much easier.
Please note that the maximum capacity of the rain gauge glass tube is 7 inches.
Flat bottom design: rain gauge tubes with flat bottom design are more practical, which makes it easier to place them in the wild, garden, yard or most outdoor places, bringing more convenience.
Applicable scenes: you can apply these rain gauge glass with scale in many different scenes, suitable for farming, meteorological statistics, climate research and more, you can use them for different purpose.

Check Stock

MKC Wheel Marking Gauge Kit 2 Extra Blades Woodworking Tools Scriber for Woodwork

PROFESSIONAL DESIGN: This finely crafted marking gauge is turned from solid brass with a hardwood infill and stainless steel stick with etched....
SHARP BLADE for ALL WOOD: the blade is made from HSS steel with good heat treatment which can be used immediately after opening the package and....
EASY TO USE: both metric and imperial measurement values show on the stainless steel stick let you easy to read. micro-adjustable fences with big....
SATISFACTION SERVICE: Our wheel marking gauge is a well-packaged inbox and we will try our best to help you until you are 100% satisfied, if you have....
8-inch precision ground steel rod, used as depth gauge and fast measurement transmission. The scale is 1 mm/1/25 inch for easy reference. It can be....

Check Stock

Starrett 156M Screw Pitch Gauge – Thread Measuring Metric Gage Tool with Locking Device, 0.25-2.5 Threads Per Millimeter, 28 Leaves

SCREW GAUGE MEASUREMENT TOOL: The Starrett Screw Pitch Gauge is among the most valuable tools in any mechanic's toolbox. It’s used to quickly determine the pitch of various sized screw threads.
28 LEAVES: It features 28 folding leaves that are housed in a durable steel case Each leaf is clearly marked for measuring and matching up to different sized thread pitches.
LOCKING POSITIONS: There’s a positive stop locking device at both ends, so helicopter leaves can be securely locked in position for ease of use.
GAGES INTERNAL and EXTERNAL THREADS: This model screw pitch gauge is specially designed with narrow leaves that allow you to check both the internal and external threads of nuts and bolts.
METRIC MEASUREMENT RANGE: The Starrett 156M Screw Pitch Gauge offers a metric measuring range of 0.25 – 2.50mm TPI..

Check Stock

Woodworking Marking Gauge Mortise Gauge Ruler Double Head Aluminium Alloy Carpenter Tool Mortise Gauge Scriber Ruler

【Anti‑Slip】The marking gauge tool has anti‑slip teeth, and it is anti‑slip hands, beautiful and comfortable, easy to use.
【Material】The wood marking gauge main body is made of aluminum alloy with rounded corners, which makes it easy to grasp.
【High Efficiency】The mortise gauge scriber ruler is very simple to use, good performance and high efficiency. Accurate marking, a good helper for woodworkers.
【Clear Angle】Acrylic solid acrylic shock‑proof level bubble, the inner wall automatically prints 2 types bubbles (measure the level, measure the 45° angle), the horizontal direction is clear at a glance, fine workmanship, practical.
【Reliable Measurement】The woodworking mortise ruler fits the steel ruler scale used in daily use, 145mm effective scale, reliable measurement.

Check Stock