ReviewsGdstime 40mm 24v

WINSINN 40mm Fan 24V, Ender 3 Fan Upgrade 24 Volt Fans 4010 Dual Ball Bearing, Works with Ender 3 Pro 3X CR-10S (Pack of 5Pcs)

  • ✔️WINSINN 40mm fan 24v which perfect for ender 3 fan upgrade. Fit for Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus (Installation Position for Motherboard) and Ender-3, Ender-3 Pro, Ender-3S, Ender-3 v2, Ender-3 Max, Ender-5, Ender-5s, Ender-5 Pro, Ender-5 Plus, Ender-6, CR-10 V2., CR-10 v3., CR-X, CR-X Pro, CR-10 Max, CR-10S Pro V2, CR-2020, CR-3040Pro (Installation Position for Nozzle).
  • ✔️High quality Dual Ball Bearings, 5-years Warranty. balance between high air volume and low noise, Suitable for 24 hours / day long-term work, long life: 50,000 Hours..
  • ✔️Rated Voltage: DC 24V, Current: 0.08A, Power: 1.92W, Speed: 5700PRM, Air Pressure: 3.06mmH₂O, Airflow: 6.4CFM, Noise: 25.3dBA.
  • ✔️Connector & Cable length: XH2.54 – 11.8in(300mm), Size: 40mm x 40mm x 10mm.
  • ✔️Widely Used: Suitable for ventilation of Small PC Case / Router / Raspberry pie / TV box / VR glasses and any small electronic equipment cooling ventilation..
Check Stock

AmpFlow A28-150 Brushed Electric Motor, 12V, 24V or 36 VDC, 6000 RPM

  • Measures 3.0 inches diameter (77 mm) by 4.0 inches long (102 mm).
  • Can be used with voltages ranging from 12V to 36VDC.
  • Maximum power: 2200 watts (3.0 horsepower).
  • Maximum stall torque: 14 Nm (1970 oz-in).
  • Peak efficiency at 24V: 80% at 40 amps and 5500 RPM.
  • Power and torque at peak efficiency: 770 watts (1.0 horsepower) and 1350 mNm (190 oz-in).
Check Stock

HUABAN 1PCS MQ-138 MQ138 Formaldehyde HCHO Volatile Organic Compounds VOC Gas Sensor Module with Alarm Signal Light

  • MQ-138 Formaldehyde HCHO Gas Sensor Module.
  • Response time: < 1S (3-5 minute warm-up, theory preheating time 48 hours).
  • Working temperature: -10 ~ 50 oC (nominal temperature 20 oC).
  • Humidity: 95% RH (nominal humidity 65% RH).
Check Stock

2 Packs 50x50x15mm 5015 DC Brushless Blower Cooling Dual Ball Bearing Fan for 3D Printer and Other Small Appliances Series Repair Replacement,2Pin 6000rpm,UL (24V Dual Ball Bearing)

  • *2 Packs 2inches (50mmx50mmx15mm) 24V 2Pin DC Brushless Blower Cooling fan.
  • *Dual Ball Bearing,Long life--Expected life:70000Hours@40°C.
  • *For 3D Printer,Computer or Other Small Appliances Series Repair Replacement.
Check Stock

24VAC, 40 VA AC Transformer Plug in with PTC Fuse Compatible with Ring Nest Doorbell UL Listed

  • Eliminate doorbell/ thermostat underpower hassel: 24V 40VA plug in transformer, replaces and upgrades underpowered transformer with this 24V AC transformer, offering plenty of power for your thermostats and doorbells.
  • SPECIFICATION: Input is 120 V/ AC, 60 HZ.
  • Tip: The load voltage(when the doorbell is running) is 24V and the output of no-load voltage is about 27-28V, normal function and won’t affect any use.When testing the product, pay attention to use an AC voltmeter or a multimeter to test the output voltage value and use a voltage tester to measure the accurate voltage output data..
  • Safe and stable: auto-resetting (PTC) fused secondary, LED green power indicator, positive/ negative/ ground screw terminals.
  • UL certified and easy installation: electrical outlet mounting tab.
  • Warm Tip: Only equip with plug-in transformer, no extra wires included.
  • This 24v transformer is compatible with Ring video doorbell, Ring video doorbell 2, ring video doorbell pro, Nest Skybell doorbell, also compatible with Nest, Ecobee, Honeywell and Sensi smart thermostats, and other devices that require constant 24 volt power for operation.
  • Note: the brand above is only for demonstrating compatibility.
Check Stock

Double Row Dip Switch Assorted Kit in Box 1 2 3 4 6 8 10 12 Position 2.54mm PCB Mountable On Off Dip DIL Switch Pack of 40pcs Slide Type Red Toggle Switch for Circuit Breadboards and Arduino

  • 1/2/3/4/6/8/10/12 Way 2 row dip encode switch assortment kit, red color..
  • Features: 1 2 3 4 6 8 10 12 eight different positions: Pitch: 2.54mm.
  • Widely used in circuit boards, breadboards and all pcb projects, perfect as a toggle or on off switch for your projects..
  • Come with total 40pcs 2.54mm dip switch, 1 2 3 4 6 8 10 12 Position 5pcs of each position. Also with a plastic box to storage them, keeps these toggle switch well organized..
Check Stock

WINFLIKE EN-33926A Replaced Remote for Hisense TV 40H5B 40K366WN EN-33922A EN-33925A LTDN24K20US LTDN24V87US LTDN40V87US LTDN42K20US LTDN46V86US F24V77C F24V86C F46V89C F55V89C F46V86C H32K26E H32V77C

  • High-grade remote control,Perfect to replace your broken or old one.A perfect product for you. Don't miss it..
  • Brand new!No programming or pairing needed, just install new alkaline batteries, then it's ready for use..
  • The lightweight and ergonomic design make it very comfortable. Perfect for everyone (kids, adults, seniors, etc), Perfect for Hisense Smart TV remote..
  • Compatible with these models: LEDN32K15US LHD32K20AUS LHD32K26US LHD37V87US LHDN32V66AUS LTDN23K15US LTDN24K16US LTDN24K20US LTDN24V87US LTDN39V77US LTDN39V78US LTDN40K26US LTDN40V87US LTDN42K20US LTDN42K26US LTDN46K20US LTDN55V89GUS LHDN32V66AUS LTDN24K20US LTD24V86US LTDN24V86US LTDN42K26US LTDN42V77US LTDN46V86US LTD24V86US LTDN42V77US LTDN46V86US LTDN46K20US LTDN42V77US LTDN42K20US LTDN39V77US LTDN42K20US F24V77C F24V86C F46V89C F55V89C F24V77C F24V86C F39V77C F40V87C F42K26 F42V77C F46K20E.
  • US Amazon warehouse Faster shipping and excellent service. 90 days warranty !.
Check Stock

MYSWEETY Upgrade Version CNC 3018 Pro Engraver Machine, GRBL Control DIY Mini 3 Axis CNC Router Kit, Wood Router Engraver Pcb Milling Machine with Offline Controller + ER11 and 5mm Extension Rod

  • New Version: CNC 3018-PRO is an upgraded version of 3018. Control software: GRBL.
  • Spindle: 775 spindle motor (12-36V) 24V:10000r / min. Supported System: Windows XP / Win 7 / Win 8 / Win 10..
  • The main two advantages of offline controller : 1,do not need to connect the computer.
  • 2,do not need to download files. Manually adjust X, Y, Z axis location as engraving starting point, manually open or close spindle, manully open or close cooling fan..
  • Simple Assembly: Download the English manual and software: https://s3.us-east-2.amazonaws.com/3018pro/3018PRO_1.1(1).rar. If you have any question, please contact us firstly, thanks!.
  • This engraving machine can be engraved plastic, wood, acrylic, pvc, pcb, wood or the like material. Drill bit can not engrave hard metal, jade or other hard materials. Some components and core components have been assembled, simply hand assembled according to the installation instructions, you can use the rack..
  • Plastic body with a profile, small size, light weight, USB interface, GRBL control systems, learn to use the preferred entry. Either by inscribing, and can be carved with lasers(not include). You can buy the laser head on asin: B07334WBC9, B07GR29FZR, B07GR22BL4.DescriptionDescription:.
Check Stock

aqxreight - H3 LED Bulb, 2pcs DC12V 6500K 5050 White 9 SMD LED Xenon Auto Car Fog Light Lamp LED Bulbs

  • (10)-Bulbs 24 Volt Halogen H3 24V 70W Automotive Light Bulb PK22S T3 70 Watt Anyray A1928A.
  • Perfect for fog lights , headlamps as well as auxiliary lighting . PIAA fixtures.
Check Stock

Upgrade 3D Printer Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing for Ender 3/Ender 3 Pro 1.75mm 0.4mm Nozzle

  • Upgrade Extruder Assembled MK8 Hot End Kit with Capricorn PTFE Bowden Tubing.
  • Capricorn PTFE tubing: High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more....
  • Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.
  • Suitable For Creality ender 3/ender 3 Pro.
Check Stock

HQRP 24VAC 40VA Transformer Compatible with Nest Doorbell and All Versions of Ring Doorbell, Nest, Ecobee, Sensi, Honeywell Thermostat Power Supply Adapter Door-Bell 120v-to-24v Replacement UL Listed

  • POWER UP MULTIPLE THERMOSTATS / DOORBELLS: replaces and upgrades underpowered transformer with this 24V AC transformer, offering plenty of power for single or multiple thermostats and doorbells at the same time.
  • UNIVERSAL COMPATIBILITY: this 24v transformer fits for Nest, Ecobee, Honeywell and Sensi smart thermostats.
  • Also compatible with Ring Video Doorbell, Ring Video Doorbell 2, Ring Video Doorbell Pro, Nest Skybell Doorbell, and other devices that require constant 24 volt power for operation.
  • Safety Features: High Efficiency and Reliability.
  • Compatible With 24V 40VA Transformer compatible with Nest, Ecobee, Sensi, Honeywell Thermostat, Nest Hello Doorbell and All Versions of Ring Doorbell Power Supply Adapter Door-Bell 120v-to-24v Replacement.
Check Stock