ReviewsGear Head Motor

Grizzly Industrial G1021X2-15" 3 HP Extreme Series Planer w/Helical Cutterhead

  • Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease.
  • Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier.
  • Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI.
  • Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine.
Check Stock

OMPHOBBY M2 Dual-brushless Motor Direct-Drive 3D Helicopter-RTF(Charm Orange)

  • The main rotor adopts the brushless motor for direct drive, which perfectly controls the running accuracy and the direct smooth driving feel. It reduces the resistance and noise of gear transmission, especially in flight routes and soft 3D flight, and basically can only hear the sound of propeller cutting wind..
  • The brushless motor is manufactured by SUNNYSKY with high precision, the motor shaft and the shaft of the rotor head are integrated. Besides, the spindle can be disassembled by removing the three screws, and the installation does not affect the dynamic balance. The hand wound coils and the high-performance magnets provide continuous power to M2. After consecutive violent flight with ten batteries, the motor temperature does not exceed 50 degrees, and it can safely fly violently..
  • Independent R&D integrated OFS flight control system. Gyro, flight control, ESC, and receiver 4 in 1 controller, combined with low-vibration airframe, which makes M2 with precise lock tail and excellent control feeling. The flight control has three built-in flight modes: attitude stabilization / soft 3D / violent 3D, which is suitable for indoor flexible flight and outdoor violent flight. In addition to its own communication protocol, it is also compatible with ....
Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

  • Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
  • With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
  • The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
  • The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
  • * Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.
Check Stock

Shindaiwa Hedge Trimmer 21 inches 25.4Cc 2 Stroke Mid Reach Shaft

  • the quickest, easiest line replacement on the market.
Check Stock

Upgraded Version of Electric Shoe Cleaner Brush Electric Shoe Polisher Pro Brush Shoe Shiner Dust Cleaner Portable Wireless Leather Cleaner Care Kit for Leather Shoes Pro

  • Upgraded Version : We have upgraded the function of the electric shoe polisher kit based on the market feedback of the previous version. The upgraded....
  • Power Upgrade: The motor power is upgraded to 2500 rpm electric shoe brush, and the internal gear is upgraded from single gear to three-dimensional....
  • Material Upgrade: The black and white shoe cleaning brush head with more flexible fiber material, as well as increased bristle density. With your Shoe....
  • Bigger Box Packaging: For this version of the electric shoe brush, we have improved the way it is packaged. With the new packaging, you can give it as....
  • SOFT/HARD HAIR SHOE CLEANING BRUSH: 2 colors of high elastic fiber cleaning brush heads. The black head (soft hair) is suitable for cleaning the....
Check Stock

Invicta ITK002 Multi-Function Watch Tool Kit Set

  • ✿【3 Rotation Mode Setting】 1.OFF-turn on/off the watch winder.
  • Gear B: 2 mins CW → stop 6 mins → 2 mins CCW → stop 6 mins → repeat..
  • Gear L: 5 mins CW → 5 mins CCW → last 3 hours→ stop 9 hours → repeat.Multiple rotation modes make the watch winder box easy to use..
  • ★【Super Silent Motor】The watch box uses Japanese ultra-quiet motor to make your watch rotate quietly and safely, which is beautiful and practical, and the winding operation has no running noise. So it could be put anywhere like bedroom or office without representing a distraction factor..
  • ◆【2 charging methods】USB-DC power cable.
  • you can use the USB cable to connect the charging head of the mobile phone, convert it into a DC power cable for charging, or use the DC converter cable to connect two watch winders for charging ..
  • ♥ 【Flexible Watch Pillows】The watch pillow is made of high-end leather with soft inner lining to protect your watch from damage. The pillow is flexible and elastic to fit different sizes of watches and you can also choose multiple ways to store your watch and display your watch in multiple directions..
Check Stock

Athena (P400250850252/1) Complete Engine Gasket Kit

  • Fitment: Our this 4-Stroke Motor Short Case Engine only compatible with 150cc engine size two-wheeled scooters(Not suitable for go kart)..
  • This 150cc motor only suitable for 10" tire.Widely used in all kinds of two-wheeled scooter.
  • without reverse gear, continuously variable.
  • Transmission CVT: CVT consist mainly of 2 transmission pulleys and 2 transmission belts.
  • It’s compact, simple design offers seamless shifting between an unlimited amount of varying gear ratios, allowing a smooth rate of acceleration.
  • This complete engine set includes carburetor, CDI, starter solenoid, coil,kick start lever..
  • This 150cc motor without reverse gear, short axle, short box, it can be installed on the ATV, but you need to install an additional reverse gear.
Check Stock

CNCEST Outboard Boat Motor Engine Inflatable Boat Fishing Boat Engine Power for Sailboats Small Yachts

  • 【2 Stroke 3.5HP Outboard Motor】- VONZOER 2 Stroke 3.5HP Outboard Motor, superior engine with water cooling CDI system to improve the reliability of the whole machine. Fuel saving, quick start, strong horsepower, low noise, superior performance, environmental protection, durable and compact structure, forward design..
  • 【Wide Applications】- VONZOER outboard boat motor is great for inflatable boats, small yachts, fishing boats and sailboats or used as an auxiliary trolling motor. It is suitable for both saltwater and freshwater..
  • Full throttle perating range: 4000-5000r/min.
  • Recommended fuel: Regular unleaded gasoline.
  • 【Warm Note】- Please add gear oil to the gears before use the motor and replace gear oil after the run-in period(10 hours). Our outboard motor doesn't with gear oil, please prepare it by yourself.
Check Stock

Makita DA3010F 3/8\ Angle Drill, reversible

  • Powerful 4.0 AMP motor with less weight (3.5 lbs.).
  • Variable speed (0 - 2,400 RPM) for drilling in a wide variety of materials.
  • Compact design (10-5/8" long and 2-5/8" head width) for use when working between framing studs and other close quarter applications.
  • Paddle switch with speed limiting dial to prevent over-tightening of fasteners.
  • Built-in clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds.
Check Stock

Jutagoss 1Pcs Miniature Gear Motor GA12-N20 DC Gear Motor 6V 1000RPM Encoder Speed Velocity Measurement Mini Car Balance Motor

  • 【High Quality】-The gear motor is made of metal gear.
  • Good toughness impact resistance the quality of the bearing and the service life of the gear motor are improved extremely durable.
  • 【Feature】-You can also easily mount a wheel on the motor's output shaft.
  • 【Application】-Great replacement for the rusty or damaged DC geared motor.
  • Widely used in Intelligent remote Control car.
  • 【Package】-1 Pcs GA12-N20 DC Geared Motor with Encoder Test wire.
Check Stock

WLtoys 104019 1:10 2.4G Racing Remote Control Car 55KM/H 4WD Large Alloy Electric Remote Control Crawler Children's Toy

  • Basic information Brand: WLtoys Model: 104019 Scale: 1/10 Speed: 55km/h Motor: brushless 3660 Frequency: 2.4 GHZ Battery capacity: 2200mAh 7.4V,ALL-METAL CHASSIS With a cool appearance and an all-metal chassis, this exquisite workmanship gives you a different experience.Package Information: Package Size: 40*29*21cm Package Weight: 3310g Gift Box Package Packing List: 1* RC Car 1* Remote Controller 1* Battery 1* Charging Cable 1* Screwdriver 1* Cross Wrench 1* Head up Wheel.
  • It adopts a 2.4G radio control system. With a high speed of 55km/h, you can enjoy the high-speed competition at the track or in your own backyard. This RC car is a perfect toy to bring your kids to explore the field of automotive technology. It is a great gift to help your child's brain development..
  • Features: High-Speed Performance: Built-in super strong, powerful, and high-efficiency brushless motor makes the electric energy converted into power maximally and the running speed is up to 55km/h. 2.4G Remote Control Frequency: 2.4GHz Radio System with anti-jamming capability allows us to race at the same time on the same track. The control distance is up to 100 meters..
  • High Quality Accessories: Four wheel independent suspension system, simulating metal oil pressure shock absorption, ....
Check Stock