ReviewsGear Oil Gear Drive

Traxxas 36054-1 1/10 Stampede 2WD Truck BlueX RTR w/TQ Radio/iD/XL-5 ESC

  • Traxxas 36054-1 - Stampede XL-5 1/10 2WD Monster Truck & iD Battery RTR, Blue.
  • Features: Chassis: Fiber Composite Tub .08" (2mm) Thick, Gray in Color. Drive: Rear Wheel, Motor 550 Size Traxxas Titan 12 Turn, Fan Cooled. Radio: Traxxas TQ Two Channel 2.4GHz with Steering/Throttle Trim/Reverse, Throttle Neutral Adjust and High Torque Waterproof Steering Servo, Water Tight Receiver Box with #2216 4-Channel Receiver. Battery: 7-Cell Hump 3000mAh NiMH with Traxxas High-Current Connector and iD Auto Battery Identification that Allows Traxxas iD Equipped Charg.
  • Includes: (1) Stampede Chassis with Oil-Filled Shocks (1) 550 Motor (1) XL-5 ESC (1) Body (4) Tires (4) Foam Inserts (4) Wheels (1) 19 Tooth Pinion Gear (1) 23 Tooth Pinion Gears (1) 86 Tooth Spur Gear (1) TQ 2.4GHz Radio with Waterproof Electronics (1) 7-Cell Hump NiMH 3000 mAh Battery (1) 4A DC Car Charger Illustrated Instruction Manual.
  • Specs: Length: 16.25" (413mm) Width: 13" (330mm) Height: 9.5" (241mm) Weight: 2.98lbs (1355g) Approx. Wheelbase: 10.75" (273mm) Front and Rear Tread: 10.5" (266mm) Side-to-Side at Wheel Centers Front and Rear Track: 12.75" (324mm) Side-to-Side at Wheel Edges Ground Clearance: 2.4" (60mm) Gear Ratio: 4.5:1 with Stock 19T Pinion Gear 3.7:1 with Optional 23T Pinion Gear.
Check Stock

Stens 435-859 Starter Drive Kit, Replaces Briggs and Stratton: 497606, 696541, 16 Teeth, 7-1/4\ Length, Composite Drive Gear

  • Replaces Briggs & Stratton: 497606, 696541.
  • Kit includes starter gear, drive gear, return spring, clutch drive, retention plate, washer and clip.
Check Stock

uxcell 5/16 Inch Diameter x 3 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 4PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 8mm(5/16").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

41A2817 41C4220A Drive Gears Compatible with Liftmaster Craftsman Chamberlain Sears Garage Door 1984-Current Replacement (2 Pack)

  • Not all models listed, please email us to check compatibility if you’re unsure..
  • Drive gear for liftmaster garage door openers 1984-Current.
  • Compatible gear only same as gear in repair kit: 41A2817 & 41C42200A 81B0045.
  • It is compatible for 1/3 HP, 1/2 HP and 3/4 HP chain and belt drive garage door openers manufactured 1984.
  • Works with: LIFTMASTER, CHAMBERLAIN, CRAFTSMAN, SEARS, MASTER MECHANIC AND WAYNE DALTON garage door operators..
  • This is the replacement gear only. You will need to provide gear grease. [Important: failure to grease, will result in the gear stripping out again].
Check Stock

uxcell 5/32 Inch Diameter x 1.7 Inch Length Landing Gear Steel Axle Shaft Drive Axle with Nuts for RC Airplane - 2PCS

  • FEATURES: Item Name: Landing Gear Steel Drive Shaft Drive Axle. Usage: for RC Airplane landing gear..
  • ITEM SPECIFICS: Thread Diameter: 4mm(5/32").
  • COMPATIBLE WITH: Vehicles & Remote Control, Helicopters.
  • ADVANTAGE: High strength steel material, excellent workmanship, Suitable for fixed wing model landing gear..
Check Stock

Andersen Hitches Ultimate Trailer Gear Super EZ Bag (3630)

  • Each Ultimate Trailer Gear EZ Block Bag includes the following: 4 EZ Blocks, 2 Camper Levelers with 2 TUFF Chocks, 1 Rapid Jack with 1 Rubber Pad, 1 Clean Step, and a Sturdy Carry Bag.
  • Keep 90% of the dirt OUTSIDE of your RV, Trailer, or Home, with the innovative Clean Step! No more dirty, worn-out mats to throw away… and less dirt inside means less cleaning for you! Just rinse the Clean Step with water.
  • EZ Blocks feature a recessed post hole that helps prevent post jacks from slipping. The EZ Block is designed to resist dirt and oil.
  • A full camper leveler kit (2 Camper Levelers, 2 TUFF chocks) are included in the bag! Simply drive on until level, chock… and DONE! You’ll won’t have to struggle with heavy boards or building blocks.
  • Keep all of your gear in ONE place so you can GRAB and GO. The Ultimate Trailer Gear Super EZ Bag is a heavy-duty, sturdy canvas carry bag with handles.
Check Stock

Pinnacle PR10Xi Primmus Xi Baitcast Reel, Gray Body/Red Accent

  • Lightweight duralumin spool, drive gear, worm gear, and drive shaft.
Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

  • Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
  • Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
  • Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
  • Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..
Check Stock

BJTDLLX 2 Stroke 12 HP Outboard Motor 169CC Heavy Duty Fishing Boat Engine Marine Engine with CDI Ignition System Water Cooling System

  • 【2-stroke 12HP Outboard Engine】Displacement: 169CC.
  • Control System: Tiller control Starting System: Manual start..
  • 【Details】Control System: #93 gasoline.
  • Recommended Propeller range: 3 -9"1/4''x8".
  • Recommended Lubricant: 2 Stroke Lubricating oil.
  • 【Advantages】water cooling technology improves the reliability of the whole machine.
  • light weight, easy to carry, unique appearance, large fuel tank capacity. Standard fuel tank capacity: 24L..
  • 【Reminder】The oil must be two-stroke special oil. The two oils must be mixed evenly.
  • after use, the fuel in the carburetor must be completely discharged. Mixing ratio: fuel: oil=50:1..
  • 【Gear Oil Filling Method】There is a screw on the gear box, unscrew the screw to add gear oil. Each outboard engine is filled with gear oil before leaving the factory, so it does not need to be refilled for the first time. After that, add it according to personal use and check it every ten hours..
Check Stock

CHEEKON SHS 13:1 of Steel Gear Standard V2 V3 Gear Box

  • Low Noise High Torque Gear Set with 9teeth Sector Drive Ratio: 13:1.
  • Advise using 6.03mm, 6.04mm, 6.05mm innner barrels and M120-M160 Springs.
  • Suitable for Gear Box Version 2 and Gear Box Version 3.
  • Chrome molybdenum alloy steel sector gear.
Check Stock

ZJIANC Fishing Reels, Freshwater and Saltwater Fishing reels, 4.7:1 Low Speed Spinning reels, surf Fishing, All-Metal Body, Rugged reels, Maximum Drag Over 22 lbs

  • SPINNING REEL PARAMETER - Size：5000/7000, Gear Ratio: 5.0 : 1,4+1 Made in Japan Ball Bearings,Max Drag: 5000Size-15lb.
  • Line：0.32mm-180M/0.40m-160M/0.45m-100m（5000），0.35mm-280M/0.40mm-240M/0.45mm-170M（7000）.
  • ·POWERFUL FISHING REEL-The body, spool, and handle are made from aluminum，which are lightweight and strong. Reel has a metal main shaft and zinc drive gear, machined pinion gear for fish fighting power.Max Drag: 5000Size-15lb.
  • ·SUPER SMOOTH-The ball bearings made in Japan are installed at both sides of drive gear. Besides, pinion gear and drive gear have good endurance so that durability of rotation can be remained furthe..
  • · EASY TO OPERATE - Finshing Reels can be switched between left and right hands according to the user's habits, and the handle can be folded for easy storage after use. Lightweight spool, heavy caliber drag knob, and clutch lever with forward and reverse rotation..
  • · AFTER SALES SERVICVE - If you find any quality problems with our products, please contact us in time, and we will cooperate to deal with the after-sales problems. ZJIANC's aim is to produce spinning wheels which are strong and easy to operate for customers, so that fishermen can experience the fun of fishing.
Check Stock