ReviewsGear Oil Toyota

Black 6

  • Used to raise the gear shift knob to provide a better arm angle for more precise and comfortable shifting. Longer shift levers are commonly used in race applications where every shift matters..
  • This Shift Knob Extension will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob..
  • Easy to install, can be installed quickly, no modification required..
  • Fit for most Manual Vehicles with M12*1.25 Thread, for Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Nissan Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
Check Stock

12 Packs 90430-12031 Toyota Oil Drain Plug Gaskets Compatible with Toyota Tacoma Tundra Camry Corolla 4Runner Scion Avalon Lexus Oil Plug Gasket (12) (12) (12)

  • Part Number: Replaces 90430-1203, 9043012031 Inside diameter: 0.48 inch, Outside diameter: 0.82 inch, Thickness: 0.07inch.
  • Direct replacement: Used for oil drain plug on Scion Lexus Toyota Crush Washer Seals.
  • Trustworthy quality: The toyota oil drain plug gasket fits the oil drain plug perfectly and works well to keep the drain plug tight and free from leaks, easy to replace old broken toyota drain plug gasket with this exact copy..
  • The oil drain plug gasket located at the bottom of the oil pan helps keep oil from leaking around the oil drain plug. These gaskets are usually a single-use item and should be replaced with each oil change..
  • 20 Year Warranty: If have any quality issue, we would like to issue refund or arrange reshipment within 20 years. Excellent service and superior lexus drain plug gasket toyota.
Check Stock

Toyota Genuine Parts 08885-02106 Hypoid API GL-5 75W-90 Gear Lube - 1 Quart

  • Specially formulated by Toyota for Toyota vehicles.
  • Genuine Toyota fluids: The long-life, high-performance fluids.
Check Stock

SHIFTIN Leather & Wood Trim Gear Shift Knob Shifter for Lexus GX470 2003-2009 UZJ12 and for Toyota Land Cruiser Prado 120 2002-2009 (Black Leather / Piano Black)

  • Round wooded ball, carbon fiber style, his round knob comfortably fits into your palm to hold the shift..
  • Materia:rosewood, manual short throw gear shifter gear shift knob shank,and the color will NEVER rub off or lose its shine..
  • Wooden gear shift knob fits for most manual cars' shifter, such as for Acura, for Honda, for Mazda, for Mitsubishi, for Toyota, for Scion, for Nissan, for Infiniti, for Subaru and more..
  • Size is M10x1.5,With 4 adapters:12mm,11mm,10mm,8mm..
  • Package Include: 1x wood shift knob, 4x adapters, 1 x wood wax oil, 1x sponge.
Check Stock

Dewhel 5 Speed Manual Gearbox Shift Knob M12x1.25 Screw On Aluminum Neo-Chrome

  • Manual 5 Speed Car Shift knob Type-R Style design for a comfortable grip.
  • Race Auto Shift Knob Made of High quality aluminum with neo chrome finish for a performance look.
  • Shift knob Kits Fits thread size: M12x1.25 with adapter nuts for most Manual Subaru Toyota Scion cars.
  • High quality Gear manual stick shift knob,All vehicles with 12mm x 1.25 threaded shifter.
  • shift knob Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Nissam Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008),.
Check Stock

Oil Filter Wrench and Drain Tool Set for Toyota Lexus Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System Housings Fits Camry, RAV4, Highlander A7716F

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

Heavy Duty Oil Filter Wrench for Toyota,Lexus,RAV4,Camry,Tundra,Highlander,Sienna and More-Cup Style Oil Filter Cap Removal Socket Tool for 2.5-5.7L Engine with 64mm Cartridge Style Oil Filter Housing

  • High Quality: A ABIGAIL Toyota oil filter wrenches are forged from high quality 6061 T5 aluminum, which can bear tremendous pressure when you unscrew the extremely tight Toyota oil filter caps. and the surface is treated with a high quality black anodized finish to prevent corrosion..
  • Design: There are 4 slots on the bottom edge, which are mated perfectly with the tabs on the Toyota 15620-31060 oil filter cover and helps prevent slippage when you unscrew the oil filter housing with tremendous strength by a socket wrench or adjustable spanner..
  • Application: This 64mm 14 flute oil filter wrench fits all Toyota, Lexus, and Scion vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system while it does not fit the 1.8L engine or vehicles that use disposable spin-on style oil filters..
  • Installation Instruction: Install the wrench on the filter cap indexing the tabs and unscrew it using either a 27mm socket or 3/8” drive ratchet. If the cap is severely over tightened we recommend using only a 27mm socket to avoid breakage..
  • Service: 100% satisfaction guarantee, If you have any issues with the oil filter wrench, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you s....
Check Stock

AUPREX Oil Filter Wrench 64mm 14 Flute Oil Filter Removal Tool for Toyota,Lexus,Camry,Tundra,Highlander, RAV4, 4 Runner, Scion and Other 2.0L-5.7L Engines with Cartridge Style Oil Filter Housing

  • APPLICATIONS: This oil filter wrench is compatible with Toyota, Lexus, RAV4, Camry, Tundra, Highlander, Sienna and other vehicles equipped with 2.5L to 5.7L engines that use Toyota's cartridge style oil filter system. But it is not working on vehicles with disposable traditional spin-on canister filers and the 1.8L engines..
  • HIGH QUALITY MATERIAL: This Toyota oil filter wrench is made of high quality 6061 aluminum alloy which provides a great strength to unscrew without any damages or flex on it. The surface of this oil filter is treated with high quality black anodized finish to prevent corrosion..
  • REASONABLE DESIGN: The 64mm 14 flute oil filter wrench is with 4 teeth on the bottom edge to perfectly match the tabs on Toyota style oil filter housing which can efficiently prevent the slippage while unscrewing the oil filter housing..
  • INSTRUCTIONS: The oil filter wrench can be applied to a 27mm socket or 3/8” drive ratchet wrench to install or remove the oil filter. Simply match the wrench on the oil filter cap and unscrew with a socket or ratchet wrench..
  • EASY TO TAKE THE WRENCH OFF: Compare to some oil filter wrenches which are usually stuck on the cap, AUPREX oil filter wrench is easy to release from the oil filter housing..
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Black)

  • Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock

Motivx Tools Oil Filter Wrench and Drain Tool Set for Toyota & Lexus 2.0L - 5.7L Engines With Cartridge Style Oil Filter Systems

  • This is a bundle package containing both the Motivx Tools cartridge style oil filter wrench and oil filter drain tool for Toyota and Lexus vehicles..
  • Included are the Motivx Tools MX2320 oil filter wrench and MX2341 oil filter drain tool. These tools are for use on 2.0L - 5.7L engines that use the new cartridge style oil filter system. They do not work on standard spin-off style oil filters..
  • Works on many late model Sienna, Tundra, Highlander, Camry, RAV4, Tacoma, Sequoia, Avalon, Corolla, FJ Cruiser and Venza Toyota vehicles..
  • Includes a Toyota oil filter wrench for removing the oil filter housing cap and a oil filter drain tool for draining the filter housing before removing..
Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Neo Chrome)

  • Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
  • Made from aircraft grade billet aluminum.
  • Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..
Check Stock