ReviewsGear Pump Bushing

Canton Racing 75-630 3\ Fan Spacer Billet Aluminum with Bolts for Chevy and Ford

  • This fan spacer extends the fan 3 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.
Check Stock

OTC 4245 Freightliner Rear Suspension Bushing Master Tool Set with Air/Hydraulic Pump

  • OTC's Freightliner Rear Suspension Tool Master Set features a robust 15-Ton capacity cylinder, Air/Hydraulic pump, and installation/removal adapters.
  • Removes and installs single-wrapped FAS II Airliner Freightliner Rear Suspension Bushings 'on vehicle' - no need to remove the spring assemblies to use this tool.
  • Completes the job in a fraction of the time that traditional methods take.
  • Saves an average of 45 minutes per bushing (4 per vehicle) on flat rate of 1.5 hours per bushing - a huge time savings.
  • No more hammering prevents impact damage to suspension components while dramatically reducing the effort required by the technician performing the work.
Check Stock

Car Shifter Bushing, Car 6 Speed Manual Transmission Shifter Bushing Front Rear Shifter Linkage Stabilizer Bushings Replacement for Subaru Impreza WRX STI 2004‑2020 Shifter head/shift accessories

  • Function: The shifter linkage bushing will help eliminate shift ramps, maintain more consistent shifts and quickly get into gears for better operation..
  • Fitment: The front and rear shifter bushing kit is a replacement for Subaru Impreza WRX STI 2004‑2020, with 6 speed manual transmissions only..
  • Feature: The bushing kit could improve shifter precision and feel during gear changes, significantly reducing chances of sloppy or missed shifts..
  • Material: Made of PU and metal material which could better improve suspension, drivability, and supports better overall handling and performance of your car..
  • Fine Workmanship: Professional manufactured, exquisite workmanship with unique design, ensure stable performance and high reliability..
Check Stock

MSR Expedition Field Service Kit for Camping and Backpacking Stoves Dragonfly Kit

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing,....
  • Dragonfly Service Kit also includes: DragonFly Flame Spreader, DragonFly G-Jet, DragonFly K-Jet, Fuel Line Filters, Cool Fuel Tool.
Check Stock

Canton Racing 75-620 2\ Fan Spacer Billet Aluminum with Bolts for Chevy and Ford, 1 Pack

  • This fan spacer extends the fan 2 inches off the water pump flange. It comes with bolts and an adapter bushing for 5/8" and 3/4" water pump shafts. Designed to fit both Chevy and Fords.
Check Stock

HRepair Flip Manufacturing Steering Sector Gear & Pinion Kit Fits John Deere LA Series - 19 Tooth LA120, LA125, LA130, LA135, LA140, LA145, LA150 Replace Part Number GX21924BLE, GX20053, GX20054

  • Replacement Replace For OEM Part Number GX21924BLE, GX20053, GX20054, GX21994.
  • Check out the steering sector gear and pinion gear of the lawn mower. If they are stripped, which means they need to be replaced Our well manufactured Steering sector kit could fix your problem immediately and will save you time and money..
  • Fitment For: for John Deere LA100 LA102 LA105 LA115 LA125 LA130 LA135 LA140 LA145 Mower Tractors, You may match the fitment carefully in the description..
  • Notice: The L and LA mowers do NOT use the same steering sector plate. Please verify your model is listed in the fitment section..
  • You Will Get : 19 Tooth LA Series Replaces Part Numbers GX21924BLE Sector Plate, GX20053 Pinion Gear, GX20054 Metal Bushing, GX21994 (X2) Plastic Bushing as pictured.One year warranty. If you have any questions, you can find us by email, and we will solve it for you in time..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Mini Micro Water Priming Gear Pump Dc 3-12v Sinking Pump Waterproof A1

  • DURABLE ALUMINUM HOUSING: Manufactured from high-quality diecast aluminum, our fuel transfer pump is extremely dependable and lightweight and will put minimal stress on your tank bung. The aluminum housing is rugged and corrosion-resistant to withstand years of work in any application..
  • ROTARY GEAR DESIGN: The rotary gear pump is engineered with fewer moving parts, which means less friction and wear on its components. Thus this rotary gear pump will have fewer needed repairs and longer life than a rotary vane pump. When you need reliable performance GPI’s gear pumps are over engineered to deliver..
  • EASY-TO-USE: The 12-VDC motor of our fuel transfer pumps is highly efficient as it delivers gasoline, diesel fuel, ethanol blends, and kerosene at flow rates up to 15GPM. This economy pump comes with the standard nozzle cover and is ideal for applications where accessories are already available. Pump only for direct fuel tank mounting..
  • 2-YEAR WARRANTY: Our M-150S GPI fuel transfer pumps come with a 2-year warranty and are UL Listed Motor and CSA Certified. Feel confident in knowing that your fuel pump has been providing longer run times and award-winning performance..
Check Stock

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

  • SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
  • HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
  • ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
  • CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.
Check Stock

MTD 941-0656A Hex Flange Bearing 5/8 ID

  • Replacement part number:717-1554 917-1554 941-0656A 741-0656A 741-0656 9410656a 9410656 112-0863.
  • Compatible with Replace for MTD 717-1554, Toro 112-0863 941-0656A, 741-0656 - Used on Riders since 1999. 11 tooth. Splined bore.
  • Hex Steering Bushing Specs, ID: 5/8" Ht: 1/4" Replacement Steering Shaft Pinion Gear Bushing for Troy-Bilt Bronco Horse Big Red GT50 GT54.
  • Compatible with Fits Cub Cadet 1170, 1180, 1212, 1515, 1517, 1525, 1527, 1529, 1600, 1800,LT1018, LT1022, LT1024, LT1040, LT1042, LT1045, LT1046, LT1050, SLT1550, SLT1554, GT1222,GT1554.
  • Compatible with Troy-Bilt Bronco, LTX1842, LTX2146, GTX2446, GTX2654, Horse, Big Red GT50 & GT54 - Compatible with Fits: Columbia CR30, White LT-5000, MTD Gold, Lawn Chief 46" Deck, for Yard-Man & Yard Machines & Huskee.
Check Stock

E-cowlboy Injection Pump Gear Puller & Engine Barring/Rotating Tool for Cummins Engine VE P7100 VP44 4BT 6BT Diesel, B/C Series Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesel

  • Great Compatibility — Injection Pump Gear Puller for Cummins Engines Dodge Ram Bosch VE P7100 VP44 4BT 6BT and Engine Barring/Rotating Tool for Cummins B/C Series and Dodge Pickups 3.9L, 5.9L, 6.7L & 8.3L Diesels Engines..
  • Fitment — This Gear Puller fits for any 1989-2002 Dodge Ram Cummins Injection Pump Gear.
  • Easier Work — Injection Pump Gear Puller: used to remove the injection pump gear with ease and fast. With this tool, you will have no issues pulling the Injection Pump gear. Engine Barring/Rotating Tool: just insert the tool into the flywheel housing until it engages the ring gear, then attach a 1/2" square drive ratchet or breaker bar and turn..
  • Superior Quality — Advanced high strength and toughness carbon steel structure with black finished, stong and durable, anti-deformation and anti-corrosion. High precision and hardness and a much longer service life..
  • Package Include — 1* Compressor Plate 2* bolts &1* Engine Barring Tool.
Check Stock