ReviewsGear Ratio For 3inch Tires

Torque Multiplier Labor Saving Lug Nut Wrench W/ 8 Cr-v Socket

  • The Torque Multiplier Tool Is Designed For Removing And Installing Wheel Lug Nuts On Trucks, RVs, Tractors, HGVs, Trailers And Other Heavy Duty Vehicles..
  • With 1:58 Gear Ratio Bringing 3200 NM, The Lug Nut Wrench Easily Produces A Sufficient Output Torque To Loosen Stubborn Nuts Within Minutes. Saves Both Time And Effort..
  • No Compressors Or Other Equipment Is Required. The Lug Wrench Torque Multiplier Is A Portable And Easy To Use Set That Allows You To Change Tires Anytime, Anywhere..
  • Made Of Sturdy Alloy Steel, Bearing Abrasion And Strong Leverage. The Retaining Ball On Output Shaft Keeps Sockets Secure..
  • Contents 7pcs - Deep Impact Socket (Length 75mm) ： 24mm、27mm、30mm、32mm、33mm、36mm、38mm.
Check Stock

Axial SCX24 2019 Jeep Wrangler JLU CRC RC Crawler 4WD Truck RTR with LED Lights 3-Ch 2.4GHz Transmitter Battery and USB Charger Yellow AXI00002T2

  • 100% assembled and ready to run, the compact SCX24 1/24 scale radio control off-road RC truck with water-resistant electronics is perfect for outdoor....
  • Features scale details like working LED lights and officially licensed KMC XD229 Machete wheels and Nitto Trail Grappler M/T Tires for off-road and....
  • Built for durability with sealed cartridge bearings, three-link front and four-link rear suspension, steel C-channel frame rails, steel axles and....
  • Hinged body system offers easy access to the battery, and worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces....
  • INCLUDES: 1/24 Scale SCX24 1967 Chevrolet C10 RTR RC Truck, Axial AX-4 2. 4GHz 3-Channel Radio Transmitter, 350 mAh 2S 7. 4V LiPo Battery, and USB....
Check Stock

Axial SCX24 2019 Jeep Wrangler JLU CRC RC Crawler 4WD Truck RTR with LED Lights 3-Ch 2.4GHz Transmitter Battery and USB Charger White AXI00002T1

  • 100% assembled and ready to run, the compact SCX24 1/24 scale radio control off-road RC truck with water-resistant electronics is perfect for outdoor....
  • Features scale details like working LED lights and officially licensed KMC XD229 Machete wheels and Nitto Trail Grappler M/T Tires for off-road and....
  • Built for durability with sealed cartridge bearings, three-link front and four-link rear suspension, steel C-channel frame rails, steel axles and....
  • Hinged body system offers easy access to the battery, and worm gear drive setup permits a high ground clearance plus a low gear ratio that reduces....
  • INCLUDES: 1/24 Scale SCX24 1967 Chevrolet C10 RTR RC Truck, Axial AX-4 2. 4GHz 3-Channel Radio Transmitter, 350 mAh 2S 7. 4V LiPo Battery, and USB....
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

CNBTR 0.5 Modulus Brass Reducer 20 T Wore Gear Wheel + 4mm Bore Gear Shaft

  • Set include one 0.5 modulus brass gear shaft and one 20 T brass gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

CNBTR 0.5 Modulus Light Weight Brass Reducer 20T Wore Gear Wheel + 3.175mm Bore Gear Shaft

  • Include one 0.5 modulus brass gear shaft and one 20 T brass gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Hypertech 730108 2007-2010 Toyota Fj Cruiser

  • In-line module to correct the speedometer for non-stock tire sizes and/or gear ratios.
  • Installs easily to the factory wring harness - No Splicing Required.
  • Perfect for vehicles with computers that don’t allow for tire size and/or gear ratio correction.
  • No limitations for increasing tire height or gear ratio.
  • Provides accurate speedometer readings as required by law.
Check Stock

CNBTR 0.5 Modulus Brass Gear Shaft Set 6mm Hole Dia + 50T Brass Wheel Set 1:50 Reduction Ratio

  • Include one 0.5 modulus brass gear shaft and one 50 T brass gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

Team Associated 1/10 Rival MT10 4WD Monster Truck Brushless RTR, ASC20516

  • Team Associated 20516 - Rival MT10 1/10 4WD Off-Road Monster Truck RTR.
  • Features: 2.4GHz 2-channel radio system High-Torque digital servo with spring-style servo saver Powerful Reedy 3300kV 4-pole brushless motor Three sealed gear differentials 12mm hex wheels inspired by Method Race Wheels Threaded, oil-filled, coil-over shock absorbers 4mm heavy-duty adjustable steel turnbuckles Durable slider-type drive shafts Factory-finished RIVAL monster-truck-inspired High-traction, all-terrain tires Water-resistant high-power Reed.
  • Specs: Scale: 1:10 Power: Electric Length: 507mm (20.0") Width: 325mm (12.8") Weight: 2.80kg (6.1 lb) Wheelbase: 225mm (8.86") Transmission Ratio: 2.85:1.
  • Part number(s) included (in factory packaging): 20516.
Check Stock

0.5 Modulus Small Reduction Ratio Of 1:10 Motor Output Copper Worm Wheel Gear - Modulus : 0.5 - Number Of Teeth:20

  • Set include one 0.5 modulus 5MM Hole Dia brass gear shaft and one 20 T brass worm gear wheel..
  • The transmission structure of shaft is simple, compact, small volume and light weight..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • High quality material selection, carefully processing create high quality product..
Check Stock

50Pack Heavy Duty Snap Hooks M8 5/16' Carabiner Clips 3Inch Zinc-Galvanized Steel Spring Clips Chain Quick Links Safety Connector for Hammock Swing Fitness Gym Outdoor Supplies Boating

  • 50PACK 3INCH SPRING SNAP HOOKS: Package includes 50pcs M8 strong carabiners hooks, allowing fastest connection/disconnection usages, widely used for fitness connector, swing set, hammock, gym, indoor outdoor equipment gear.
  • DURABLE STEEL CARABINERS CLIPS: 5/16” Snap hooks are made of durable zinc-galvanized steel with 500lbs holding capacity, hard material, waterproof and rustproof, long service life for heavy duty usages.
  • SAFETY AND QUIKLY CHAIN LINKS: Quick carabiner has strong structure and the open-auto-close spring gate with interlock tooth prevent forced opening by load, high safety and stable.
  • The smooth opening and closing allows you easily to attach key-ring, DIY accessories, pet leash and water bottles.
  • LARGE KEYCHAIN SPRING LINKS: Overall Size: M8x80mm Carabiner Clip.
  • Big size and easy to carry, perfect carabiner accessory for outdoor activities.
  • WIDE USED IN HOME DIY PROJECT OR OUTDOOR: Heavy Duty Spring snap hooks perfect for hammock, fitness,swing set, gym, hiking, camping, indoor outdoor equipment gear.
  • Also connecting items to a belt and any outdoor use versatile binding, rigging and anchoring hardware  .
Check Stock