ReviewsGear Reduction

Royal Purple 06300 75w90 Max Gear Oil Case, 6 Quart, 1 Pack

  • Ultra-tough, high performance Automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train.
  • Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple's proprietary Synerlec additive technology.
  • Makes gears run smoother, quieter, cooler and longer without overhauls.
  • A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles.
  • Formulated with a friction modifier additive - no additional additives are necessary.
Check Stock

Acouto 12mm Speedometer Drive Gear with 100cm Speedometer Cable for GY6 50cc 150cc Scooter Parts PC + Aluminum Alloy

  • Fitment---- The speedometer drive gear and cable kit is suitable for GY6 50cc 150cc Scooter. 100% brand new, please be assured of your purchase.
  • High Quality PC + Aluminum Alloy---- The speedometer drive gear and cable are made of high quality PC and aluminum alloy, which are wear-resistant and durable, not easy to break, and can be used for a long time.
  • 12mm Gear & 100cm Cable---- 12mm axle brand new speedometer drive gear with cable, the cable length is 100cm / 39.4 inch. The speedometer drive gear and cable kit is easy to install, direct replace the old one or broken one.
  • Good Replacement---- The transmission of gear is more accurate, high efficiency, strong vibration reduction and impact resistance, giving you a perfect riding experience.
  • Professional Manufacturing---- The speedometer drive gear and cable adopt professional manufacturing process, with stable performance and high reliability. Timely replacement of old or damaged speedometer cable for better performance.
Check Stock

Makermotor PN00219 - Compact Grease Lubricated Dual Output Shaft Gearbox 20 to 1 Worm Gear Speed Reducer

  • Maximum Output Torque: 7.8 N-m (5.8 ft-lb).
Check Stock

Abu Garcia, Revo IKE Low Profile Casting Reel, 6.6:1 Gear Ratio, 11 Bearings, 27" Retrieve Rate, Right Hand

  • 10 stainless steel ball bearings + 1 roller bearing.
  • X2-Cräftic alloy frame: This material provides exceptional corrosion resistance and rigidity for excellent gear alignment..
  • C6 carbon palm side plates deliver significant weight reduction without sacrificing strength and durability..
  • Power Stack Carbon Matrix Drag System: The unique keyed cartridge rag system provides extreme drag pressures combined with unparalleled smoothness..
  • Duragear brass gear for extended gear life and durability.
Check Stock

SHIMANO Baitrunner 8000D, Saltwater Spinning Fishing Reel

  • ...d light rotation. The rotor profile is now asymmetrical. The bail arm mechanism, which was previously situation on the same side as the line roller, has been moved to the opposite side. This improves balance and combined with a lightweight line roller, titanium bail and optimum arrangement of rotor thickness, a 14% reduction in rotational inertia has been achieved increasing sensitivity to unreached levels.
  • Hagane Gear: With amazing strength and durability, the HAGANE Gear is at the very heart of the reel. Shimano, through the application of state-of-the-art technologies, gives you the long-lasting smoothness and pleasure that you feel when you first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear. Instead the entire surface is calculated in minute detail by special 3D design and then formed by Shimano's cold forging technology.
  • MIcroModule Gear II: State-of-the-art, gear tooth surface design and MicroModule Gear II, are further advanced through Shimano's exclusive manufacturing technology. The surfaces of the drive gear and pinion gear have been analyzed and updated from the ground up in pursuit of perfection. Further improving smooth gear feeling and reducing sound..
  • Silent Drive: From the fundamental, w....
Check Stock

Shimano Fishing Vanford 4000Xg F Spinning Reel [VF4000XGF]

  • ...d light rotation. The rotor profile is now asymmetrical. The bail arm mechanism, which was previously situation on the same side as the line roller, has been moved to the opposite side. This improves balance and combined with a lightweight line roller, titanium bail and optimum arrangement of rotor thickness, a 14% reduction in rotational inertia has been achieved increasing sensitivity to unreached levels.
  • Hagane Gear: With amazing strength and durability, the HAGANE Gear is at the very heart of the reel. Shimano, through the application of state-of-the-art technologies, gives you the long-lasting smoothness and pleasure that you feel when you first use a reel, over and over again. No cutting work is applied to the teeth of the drive gear. Instead the entire surface is calculated in minute detail by special 3D design and then formed by Shimano's cold forging technology.
  • MIcroModule Gear II: State-of-the-art, gear tooth surface design and MicroModule Gear II, are further advanced through Shimano's exclusive manufacturing technology. The surfaces of the drive gear and pinion gear have been analyzed and updated from the ground up in pursuit of perfection. Further improving smooth gear feeling and reducing sound..
  • Silent Drive: From the fundamental, w....
Check Stock

Abu Garcia Silver Max Spinning Reel SMAXSP40-C SILVERMAX 40 Spin Clam

  • 9 stainless steel ball bearings plus 1 roller bearing provides smooth Operation.
  • X2-Craftic alloy frame for increased corrosion resistance. Reel spool material-Aluminum.
  • C6 carbon side plates provide significant weight reduction without sacrificing strength and durability.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unpatrolled smoothness.
  • Dragger brass gear for extended gear life.
Check Stock

Abu Garcia REVO4 SX Revo SX Low Profile Fishing Reel, black/red

  • 9 stainless steel ball bearings plus 1 roller bearing provides smooth Operation.
  • X2-Craftic alloy frame for increased corrosion resistance. Reel spool material-Aluminum.
  • C6 carbon side plates provide significant weight reduction without sacrificing strength and durability.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unpatrolled smoothness.
  • Dragger brass gear for extended gear life.
Check Stock

Abu Garcia REVO4 SX-HS Revo SX Low Profile Fishing Reel

  • 9 stainless steel ball bearings plus 1 roller bearing provides smooth Operation.
  • X2-Craftic alloy frame for increased corrosion resistance.
  • C6 carbon side plates provide significant weight reduction without sacrificing strength and durability.
  • Power stack carbon matrix drag System provides extreme drag pressures combined with unpatrolled smoothness.
  • Dragger brass gear for extended gear life. Instant Anti-Reverse feature is available.
Check Stock

Electric Plaster Saw Speed Adjustable Plaster Cast Cutter for Tearing Polymeric Materials Plaster (110V Green)

  • Oscillating frequency is greater than 12500 times/min. Oscillating angle is 5 degrees..
  • This product is used for the removal of plaster bandage after fixed reduction. Suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • Operation of plaster: Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
Check Stock

American Orthopaedic Cast Cutter, Replacement Blades Titanium Nitride Coated 2.5” (6.1cm)

  • SCOPE OF APPLICATION--This electic plaster saw is used for the removal of plaster bandage after fixed reduction, suitable for all types of plaster bandage, especially suitable for all types high polymer bandage..
  • OPERATORS SAFETY--Electric motor adopts double insulated protection device to ensure safety for the operators..
  • PATIENT SAFETY--The plaster saw uses micro motor with low noise, small vibration and speed adjust from large to small, in the actual test 1-5 gear, gently across the skin will not be injured..
  • OPERATION OF PLASTER REMOVAL--Set the machine to gear 5 or 6 and cut the surface of the plaster. The closer it is to the skin, the slower it should be, turn to low gear..
  • REPLACe BLADE--The blades of plaster saw are consumable, you can buy replacement blades from our shop..
Check Stock