ReviewsGear Shafts

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm

  • Traxxas 59076-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Red.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Di....
Check Stock

Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran

  • Traxxas 59073-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Blue.
  • Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
  • Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
  • Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body D....
Check Stock

Stanley Proto J226G Proto 6-5/8' Needle-Nose Pliers w/Side Cutter

  • For spreading both soft iron horseshoe lock washers used on brakes and tempered steel lock rings used on gear and bearing shafts.
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear HLSK103YR Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Right hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear HLSK103YL Spiral Miter Gear, 35 Degree Spiral Angle, 1:1 Ratio, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel with Hardened Teeth

  • Left hand spiral miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Spiral angle of 35 degrees better suits this spiral miter gear for higher speed and larger torque applications than straight miter gears.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

24 Teeth Spur Gear, 6mm/0.24in Rc Pinion Gear, Cast Steel Mechanical Gears for Industrial Robot Parts

  • EASY TO REPLACE - The pinion can be mounted on the shaft, no hub, no complicated tools, easy to use, a good match for industrial robots..
  • EXQUISITE WORKMANSHIP - Multi process fine grinding, precise workmanship, clear structure, small size, light weight, cut into one, fine texture, durable..
  • CAST STEEL MATERIAL - The gears are made of molded steel material for greater overall strength, stable and durable, and long service life..
  • EFFICIENT AND STABLE - 24 Tooth MOD 0.8 gear, can be matched with any MOD 0.8 gear, strong applicability, stable operation, and work that can run efficiently..
  • PRACTICAL - Gears are practical for generating positive drive between shafts and gears, very practical, small parts suitable for industrial robots..
Check Stock

KastKing Rover Round Baitcasting Reel and Rekon Level Wind Trolling Reel Comob, Ideal Fishing Kits

  • ... the best components for tough trolling & bottom fishing conditions. For smooth, trouble-free saltwater fishing, KastKing uses 3 double shielded, stainless-steel ball bearings plus an instant anti-reverse bearing. Japanese precision machined brass main gear and a stainless-steel pinion gear plus machined brass worm shafts and stainless-steel guide shaft make this conventional fishing reel powerful, durable and reliable..
  • BULLET PROOF – The hot Rover reel just became hotter. The KastKing Rover round baitcasting reel has been reinforced with thicker hard anodized aluminum side plates, CNC machined spool, precision cut brass gears, all alloy flawless level wind, industry-first stainless steel worm gear, patented metal idle gear, stainless steel shaft and other components for superior durability and corrosion protection..
  • LARGE LINE CAPACITY – KastKing kept these round, high-capacity casting reels as compact as possible while still providing tons of line capacity for anglers using leadore, heavy braid, or monofilament fishing line. Monofilament line capacity is 330 yds of 25 lb for the size 20..
Check Stock

EatMyTackle Pro Jigging Saltwater Rod and Reel Combo

  • Blue Marlin Tournament Edition 2 speed jigging reel and jigging rod combo.
  • Premium grade 30 – 50 lb. 2 piece graphite and glass composition 5’8″ jigging rod with 9 guides and EVA grip.
  • 18 wide 2 speed Blue Marlin jigging reel, max drag 40 lbs., line capacity 600 yds of 20 lb. mono.
  • Smooth shift 2 speed with gear ratio of 6.0 : 1 and 3.3 : 1 tempered stainless steel gears and shafts.
  • The absolute best jigging rod and reel combo and comes with a 2 year warranty.
Check Stock