Runva 11XP-S 12V 4x4 Off Road 11,000lbs with Synthetic Rope
- Rated Line Pull: 4989.5 kg (11,000 lb.) single line pull.
ReviewsGear Speed Reducer
Makita GA4542C SJSII High Power Angle Grinder, 4-1/2'
- Powerful 12.0 AMP motor delivers more output and variable (2,800 - 11,000) RPM.
- SJSII provides a leaf spring and cam gear drive mechanism that is engineered to reduce vibration.
- SJSII provides a mechanical gear drive to help prevent motor and gear damage by dampening the force on the gear when the wheel is forced to stop.
- Variable speed control dial enables user to match the speed to the application.
- Electronic Controller is a three-part electronic feature designed to provide the required power in high torque applications for increased tool life.
Miranda Loves Grills Ukraine and Cyprus
- Heavy Duty BBQ Grill Motor. Rust free construction, sturdy and heat resistant.
- Can be powered both by the mains (AC current) or directly on car battery. Supplied with a 6 meters apprrox. long wire..
- The steel mechanism is installed in a strong metallic box to avoid any alteration or damage from high temperature of the grill.
- The motor turns 16 - 45 times per minute and can run up to 12kgs balanced load. It has a built in gear Box Reducer - All Metal Gears.
Sof Feet Callus Reducer 20 Pack Replacement Abrasive Screens
- Reducer Screens are available in convenient packs 12 and 20 packs.
- gently rub callused areas to remove hardened skin..
- When the screen becomes filled with dry tissue, simply tap the reducer on a dry towel..
- When the callus reducer screen does become worn, simply loosen the callus reducer thumbscrew and replace..
Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)
- Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
- SJS technology is a mechanical clutch system that minimizes motor and gear damage.
- Variable speed control dial enables user to match the speed to the application.
- Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
- Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
KastKing Speed Demon Elite Baitcasting Reels,8.6:1 Gear Ratio Fishing Reel,Left Handed Baitcaster
- HIGHEST GEAR RATIO BAITCAST FISHING REEL - When KastKing set out to conquer the fishing tackle world with the fastest retrieve speed baitcaster on the planet, they did more than make Speed Demon Elite baitcasting reels fast. They pulled out all the stops. Based on input from Pro anglers in MLF, B.A.S.S., FLW, and BFL and scores of recreational fishermen KastKing added unique and patent pending features. The results were outstanding. And, like all KastKing fishing reels, they made it affordable!.
- A GREAT FISHING REEL STARTS WITH GREAT GEARS - KastKing used Hamai precision cut aerospace aluminum 44.3mm main gear and brass pinion gear for ultimate performance, 10.5:1 speed and an amazing 42 IPT for super-fast line retrieve. This makes it the fastest gear ratio baitcast reel on the market today. If that’s a little too fast for you Speed Demon Elite is also available with 8.6:1 gear ratio / 34 IPT and all the same other features..
- A GREAT FISHING REEL STARTS WITH GREAT GEARS - KastKing used Hamai precision cut aerospace aluminum 44.3mm main gear and brass pinion gear for ultimate performance, 10.5:1 speed and an amazing 42 IPT for super-fast line retrieve. This makes i....
Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS
- 【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
- 【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
- 【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
- 【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
- 【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..
SOUTHWEST SPEED POWER STEERING CONVERSION KIT,COMPATIBLE WITH 76-86 JEEP CJ5 CJ7,20:1 GEAR BOX,1400 SERIES POWER STEERING PUMP,V-BELT PULLEY,PITMAN ARM,TELESCOPING STEERING SHAFT,LINES,HOSES,FITTINGS
- Southwest Speed Heavy Duty Manual to Power Steering Gear Box Kit with 20:1 Gear Ratio, and 1400 Series Performance Power Steering Pump that fits 1976-1986 Jeep CJ > This Southwest Speed Steering Gear Box Kit includes Southwest Speed Re-manufactured Heavy Duty Factory Replacement Power Steering Gear Box featuring a 20:1 Gear Ratio with 13/16"-36 Input Shaft, and 1 1/8"-32 Spline Output Shaft.
- Kit Includes: | Southwest Speed Re-manufactured 1976-1986 Jeep CJ Replacement Heavy Duty Power Steering Gear Box (# 105-2974) > Engineered for superior durability > O-Ring Ports > O.E. Spool Valves > Heavy Duty Gears > 20:1 Gear Ratio > 13/16"-36 Input Shaft > 1 1/8"-32 Spline Output Shaft > 2.750" Standard Piston Diameter > 18mm O-Ring Pressure Fitting > 16mm O-Ring Return Fitting.
- Southwest Speed Re-manufactured 1976-1986 Jeep CJ 1400 Series Performance Power Steering Pump (# 149-1622) > Fits Jeeps with 258/304/401 cu. in. engines, as well as 4.0 Liter, with the OE Can > Re-manufactured > Perfect pump for rock crawlers > 1400 Series Pumps are Identical to the 1300 Series Pumps but are manufactured with much stronger components > Larger Ring and rotor which displaces more fluid per revolution.
- Southwest Speed 1976-1986 Jeep CJ 5 3/4" Power Steering Pump V-Belt....
Sof Feet 12 pak Replacement Abrasive Screens 12
- Reducer Screens are available in convenient packs of 5, 12, or 100..
- gently rub callused areas to remove hardened skin..
- When the screen becomes filled with dry tissue, simply tap the reducer on a dry towel..
- When the callus reducer screen does become worn, simply loosen the callus reducer thumbscrew and replace..
Worm Gear Nema23 Stepper Motor 3.5A L2.1inch Gearbox Ratio 30:1 Speed Reducer for CNC DIY Router
- 2 phase stepper motor 2.1inch long, 1.3Nm.
- Speed reducer motor output speed 0--20 R/min.
- Applied to CNC Router, Engraving, Milling, Lathe. Fast Delivered 4-6 days after shipping..
Reliable Barracuda 200ZW Zig-Zag Sewing Machine, 120V, 800 Stitches Per Minute, Heavy- Duty Metal Construction, Up to 4 Stitches Per Inch, Built-In Speed Reducer, Reverse Lever Mechanism
- 8 LAYERS OF SUNBRELLA-PLUS - A full 8mm clearance under the foot allows sewing of 10 or more layers of heavy canvas and up to 8 layers of Sunbrella-Plus.
- BUILT-IN SPEED REDUCER - The built-in speed reducer gives you the machine extra torque to get through the toughest jobs..
- HEAVY-DUTY CARRYING HANDLE - A heavy-duty carrying handle for easy portability.
- REVERSE LEVER MECHANISM - Reinforce the seams simply by pushing down the reverse lever.
- 800 STITCHES PER MINUTE | 10-POINT QUALITY CHECK | TOOTHED BELTS & PULLEYS | STITCH WIDTH ADJUSTMENT.
- Note: The 200ZW performs best on medium to heavy weight fabrics including but not limited to sunbrella, canvas, and tarps. The 200ZW is not recommended on lighter weight and delicate fabrics such as lighter denim or soft leather..
- Unused equipment may be returned prepaid within 30 days of original receipt for a refund of the purchase price (minus any shipping charges). On Equipment which has seen usage, a 10-20% restocking fee will apply depending on the condition of the return. Reliable does not accept returns after 30 days. A return authorization number is required for all returns..