ReviewsGeneral Motor Driver

POPULO Impact Driver Kit 1770 in-lbs 20V Max Lithium Ion Cordless 1/4 Hex Impact Drill 39 Piece S2 Impact Drive Bits,0-2900RPM Variable Speed 2.0 Ah Li-ion Battery,Fast Charger.

  • 4 POLE MOTOR & 1,770 IN-LBS TORQUE - Our compact 4 pole motor provides higher efficiency, has double work output than a regular brushed 2 pole motor,....
  • VARIABLE SPEED & REVERSE CONTROL - The speed of the impact driver can be adjusted from 0 to 2900 RPM by the amount of trigger force. The variable....
  • ¼” QUICK RELEASE CHUCK, BUILT-IN LIGHT, BELT CLIP - Compact (6”) and lightweight (2.68 lbs - bare tool) design fits into tight areas and....
  • LITHIUM ION TECHNOLOGY & 20V MAX - Power up for a longer runtime, no memory and more compact and lighter, much convenient than the corded. Battery....
  • ULTIMATE ACCESSORIES SET -  Impact Driver, 1" Impact Driver Bits (20Pcs), 2" Impact Driver Bits (6Pcs), 2" Regular Driver Bits (2Pcs), Sockets....
Check Stock

Makita XPT02Z 18V LXT Hybrid Brushless Impact Driver

  • Hybrid 4-function tool with impact, hammer, driver and drill all in one.
  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Hammer Driver-Drill mode features variable 2-speed operation (0-700 & 0-2, 700 RPM) (0-8, 400 & 0-32, 400 BPM).
Check Stock

TIMPANO TPT-D3200TI-ND 2″ Exit Neodymium Titanium Compression Driver for High Output, Frequency Response from 1,600 to 19,000 Hz

  • Power You Can Rely On: The high energy motor is also response for output up to 110 dB with only one watt of input power.
  • New Technology: A neodymium motor focuses magnet flux into the gap while keeping driver weight below 3.92 pounds.
  • Designed for Efficiency: Compression horn driver uses a neodymium ring motor design to pack as much BL product into the voice coil gap as possible.
  • Solid Structure: When combined with the titanium dome diaphragm, to produce crisp sound over a broad range (from 1,200 to 18,000 Hz) with an emphasis on the critical mid range high range.
  • Quality You Can Trust: Choose Timpano’s D3200TI-ND titanium compression driver for a high output compression driver to be used for the critical mid range high (vocals).
Check Stock

Makita XT269T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 & 0-2, 000 RPM) with BL Brushless motor delivers 530 in pounds. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 pounds of max torque.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

HiLetgo L298P DC Motor Drive Module L298P DC Motor Drive Shield H-Bridge Drive Expansion Board High-Power DC Stepper Motor Controller for Arduino

  • Driven part of the input voltage VS: VIN Input 6.5 ~ 12V, PWRIN 4.8 ~ 35V input..
  • The L298P shield DC motor driver has PWM speed control mode.
  • Adopt dedicated high-power motor driver chip L298P which can directly drive two DC motors with drive current up to 2A..
  • Stack design can be directly plugged into the Arduino, easier to use..
Check Stock

Makita XT269M 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 4.0Ah Blue

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Hammer Driver-Drill (0-500 and 0-2,000 RPM) with BL Brushless Motor delivers 530 in.lbs. of Max Torque.
  • Variable speed Impact Driver (0-3,400 RPM and 0-3,600 IPM) with BL Brushless Motor delivers 1,500 in.lbs. of Max Torque.
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

1 HP Electric Motor General Purpose Single Phase Motor 3450 RPM 115/230V 11.2/5.6A 56C Frame TEFC CW/CCW

  • ✊General Purpose Single Phase Motor: HP - 1,POLE - 2,FRAME -56C, ENC -TEFC,IP - 55.
  • ✊Security Persistent: INS - F, Rotation - CW/CCW, Shaft diameter - 5/8" ,Shaft length - 1.88".
  • ✊Housing Material: Rolled steel shell. Adopt S1 continuous working system, safe and durable, long service life.
  • ✊HZ: 60Hz, Voltage: 115V/230V,AMP: 11.2/5.6A, RPM: 3450.
  • ✊Widely Application: 1HP general purpose motor is suitable for general equipment. Please purchase motor according to the specific needs of the parameters, you can send an email for detailed inquiry at any time.
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock

DCK Impact Driver, 20V Max Brushless Cordless Impact Driver Kit, 1600 In-lb, 1/4" All Metal Hex, Variable Speeds, 4.0Ah Battery & Charger, 42 pcs Bits, Power Impact Driver for Metal, Wood (KDPL03-14)

  • ...argers for worry-free, long-lasting protection. Search "DCK battery" or "DCK charger" on Amazon and you will find it..
  • [Powerful Brushless Motor] The brushless motor is more suited to cordless tools. Compared to a brushed motor, a brushless motor impact driver performs better, lasts longer, and is cheaper, providing greater productivity on the job. The DCK 20V impact driver kit with variable speeds up to 2000 r/min and high torque up to 1600 inch-lbs, allows our power impact driver to drive screws or tighten nuts at impressive speeds. It's suitable for metal, wood, parts mounting, etc..
  • [Smart Loosen Technology & 1/4" All Metal Chuck] Smart loosen mode turns on when the green light on the cordless impact drill battery is on. It will automatically stop when tightening screws, providing excellent speed and torque balance for a wide range of uses. The speed is controlled by pressing the variable speed switch, the higher the pressure, the higher the speed. The 1/4" all metal hex impact driver for quick change chuck will improve work efficiency and save working time..
Check Stock