ReviewsGenerator Set Control Module

Energy Dynamotor,Miniature Hand-cranked USB Charging Generator Power for Backup Lighting Power Supply,Charging,Testing, Teaching,Hydraulic Generator,etc

  • DC20D is one module used for Diesel Engine or Generator..
  • It is with the functions of Auto Start/Stop, Protection and Alarm indication. DC Power and Running situation is indicated on the front panel..
  • The status of the engine and generator can be checked conveniently..
  • Over Frequency, Low Frequency, Over Voltage, Under Voltage, Low Oil Pressure, High Temperature, Low Water Level, Low Oil Level, Charge Failure, Over-time Stop, Emergency Stop Alarm System as well as Low Battery Voltage can be indicated in time..
  • The output contact adopts relay, which can withstand large output current, and can set system parameters according to the button, so as to meet the application of different occasions..
Check Stock

Synthrotek, Erica Synths Swamp DIY Kit

  • The SWAMP is a random CV and audio generator inspired by the famous Wiard Wogglebug module..
  • External audio input routed to ring modulator..
  • Clock input and output to sync the module to your modular system.
Check Stock

JUNSHUNTONG HF VFO for Ham SDR QRP Transceiver,20K-220MHz RF Generator Superheterodyne Receiver Debugger,Tcxo Clock,S-Meter, 20 Band presets

  • 【HF VFO /RF Generator 】It has 10kHz to 220MHz working ranges. 0.5PPM high precise Tcxo clock, the frequency is more accurate. Tuning step of 1Hz, 10Hz, 1kHz, 5kHz, 10kHz and 1MHz..
  • 【VFO for Ham SDR HAM QRP Transceiver】 Used as a local oscillator on Homebrew radio receivers (such as superheterodyne, SDR, direct conversion and Homebrew QRP transceivers) ， a simple RF/clock generator for calibration reference or clock generation，a common 128x64 I2C OLED SSD1306 display and Si5351 module..
  • 【Adjustable】Intermediate frequency (IF) offset (+ or -) is adjustable.The bar graph of the signal meter through the analogs input (ADC).I2C data transmission, only need 2 lines it can be connected to the display, with high stability and accuracy of frequency generation.
  • 【20 Band Presets】Equipped with generator function mode.Initial frequency, end frequency, sweep-frequency-step can be set. 20 band presets (shortcuts) for BCB and HAM frequencies.RX/TX mode selector for Homebrew QRP transceivers..
  • 【 Guarantee】 We providing 100% satisfactory service to every customer to make sure our customer can purchase with confidence. If you have any questions, please contact us, we will reply and improve in time..
Check Stock

YWBL-WH Electronic Components,1000KV High Voltage Pulse Generator Super Arc Pulse Ignition Coil Module

  • This module is the finished module of transformer for small scientific production..
  • The input voltage is DC 3.7-7.4V and can output high voltage of DC 800-1000KV..
  • According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency..
  • The peripheral circuit is simple (simply connect the switch and install the battery), the discharge intensity is violent..
  • It can be used as high voltage source for high school science experiment, electronic instrument and anion generator..
Check Stock

NE555 Duty Cycle Frequency Adjustable Square Wave Signal Generator Board Module by Envistia Mall

  • NE555 square wave pulse generator module can be used to produce square wave signals.
  • Use as a square wave signal generator for experimental development.
  • Generate a square wave signal to drive a stepper motor.
  • Generate adjustable pulses for microcontrollers (MCU).
  • Variable frequency & duty cycle from 1Hz to 200KHz with amplitudes from 4.2V to 11.4V peak-to-peak.
Check Stock

PWM Pulse Frequency Generator, Icstation Signal Generator Module DC 3.3V-30V Function Generator 5-30mA 1-Channel 1Hz-150kHz PWM Pulse Frequency Duty Cycle Square Wave LCD Display

  • ⇝PWM Pulse Frequency module work voltage range is DC 3.3V-30V.
  • the frequency range is 1Hz-150kHz/1Hz-15kHz.
  • ⇝PWM frequency supports 2 modes:normal mode & accurate mode.Regular mode with 1% duty cycle steps.Precision mode with 0.1% duty cycle steps..
  • PWM output can set frequency & duty cycle separately.
  • duty cycle upper and lower bounds adjustable.
  • ⇝Square wave signal generator, generating square wave signal for experimental development, generating square wave signal that controls the motor driver, and generating adjustable pulses for MCU Dimmer.
  • ⇝There is no output voltage control. The output voltage is the same as the input voltage. That can be easily changed by adding a simple potentiometer..
Check Stock

Acxico 1Pcs DC12V 30A High-Power Brushless Motor Speed Controller DC 3-Phase Regulator PWM Controller Driver

  • With micro single-chip system, this speed control can achieve simple system programming, which can suit better high-speed high-power brushless motors..
  • Safety Startup: To avoid any injury, the motor will not start up immediately if the potentiometer of speed controller is not at the lowest gear, which is necessary for high-speed high-power motor to protect user's safety..
  • Temperature Protection: The speed control has aluminum heat sink, which allows it work at 30 A continuously. When temperature reaches 110 celsius degree, temperature detect system will send a protection signal and system will auto decrease 60% power output to protect speed control and motor. It will back to normal power after temperature is decreased. To protect the actuator module, please dissipate heat during long-time using..
  • The signal loss prevention: Auto shut down when there is no signal detected from PWM signal generator(potentiometer )..
  • Power Identification System: The speed control has power identification system, which is designed for high-speed high-power motors such as in model plane. It is not suitable for low-power brushless motors..
Check Stock

DEVMO DP20V2A Constant Voltage Constant Current Programmable Control Step-Down Supply Power Module

  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one..
  • Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A..
  • The constant voltage and constant current programmable control power supply module is cabinet and delicate, and it put the collection of analog integration and digital control functions in one. Its adjustable output voltage range is 0-20.0V, step by 0.1V. Its adjustable output current range is 0-2.00A, step by 0.01A. Boot voltages can be stored freely and the model has two groups of quick storage voltage. Compared with the traditional analog power supply, it is more convenient to quickly extrac.
  • Adjusting preset voltage:Pressing SET button, page down to U-SET, press the codding potentiometer, then enter toadjustnumeric value. Press codding potentiometer in turn to choose the numeric value you want to adjust. Turn codding potentiometer to adjust the numeric value. If you want toexit adjusting voltage, press shortly SET. In the process of adjusting preset voltage, if you open output voltage mode by pressing the ON/OFF, the output voltage wi....
Check Stock

Juried Engineering LM393AP LM393 Precision Dual Differential Comparator, Industrial Grade IC DIP-8 Breadboard-Friendly (Pack of 20)

  • The module is made of high‑quality components and processed with stable performance. It can be widely used in various voltage measurement and control applications..
  • The controller presets 5 different functions and can customize and add other specific functions according to the user's needs..
  • Increase the automatic power saving function, the user can set it autonomously. All setting parameters can be saved automatically, and the setting contents will not be lost when power is off..
  • The voltage monitoring module is a multi-function voltage monitoring controller that uses an industrial-grade microcontroller as the main control unit with a wide measurement range and high accuracy..
  • The user can set the upper voltage limit and the lower voltage limit. Measurement range is 0-100V DC, measurement accuracy +/-0.1V. Newly added 0-99.9 seconds delay pull and 0-99.9 seconds delay off function..
Check Stock

cciyu Engine Cooling Fan Control Module Fit for 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice

  • ❥FIT VEHICLES - 2006-2011 for Crown Victoria 2015-2017 for Focus 2006-2011 for Lincoln Town Car 2007-2011 for Mercury Grand Marquis 2006-2009 for Pontiac Solstice 2007-2010 for Saturn Sky.
  • ❥FEATURES OF COOLING FAN CONTROL MODULE - When the vehicle speed of the vehicle is greater than 0 KPH and the power take off unit is engaged, the fan control module raises a setpoint of the engine coolant temperature to reduce the fan speed demand processed from the engine coolant temperature, the power take off status information, and the vehicle speed..
  • ❥EASY INSTALLATION - Step 1: Check the fan control module. Step 2: Locate the fan control module. Step 3: Unplug the connectors for the fan control module. Step 4: Retaking off the Fan control module. Step 5: Installing the new fan control module. Install the new fan control module in place of the one that was toke off..
  • ❥PAKCAGE INCLUDING - We offer 1 piece of well performance Engine Cooling Fan Control Module and buy with confidence..
  • ❥NOTE - Please never mind searching for See all vehicles or look though the description of the item including the picture compared.
Check Stock

Philips Hue 2-Pack Wall Switch Module (For Philips Hue lights only), White

  • KEEP YOUR LIGHTS POWERED ON AND REACHABLE: With the Philips Hue wall switch module, your lights are always on and connected to your smart lighting system..
  • CONTROL LIGHTS, ROOMS, OR A ZONE: Use your existing light switch to control your Philips Hue smart lights in a Room or Zone..
  • CYCLE THROUGH UP TO THREE LIGHT SCENES: Use your existing light switch to set up to three different light scenes..
  • BATTERY INCLUDED: The Philips Hue wall switch module includes a battery with a minimum lifetime of five years..
  • HUE BRIDGE REQUIRED: The Philips Hue wall switch module requires a Hue Bridge..
Check Stock