ReviewsGenuine Oem Lug Bolts

StanceMagic 20pcs Black Spline 12x1.25 Tuner Lug Nuts - Closed End, Cone Seat, 1.4" Length, 0.78" Width - Includes Socket Key 3/4" (19mm) Hex - Compatible with Nissan Infiniti Subaru Scion FR-S FRS

...install correct hardware is unsafe and may cause wheel/tire assembly to loosen or fall off while vehicle is in motion. Torque wrench is required for a safe installation. You'll also need a 19mm (3/4") Hex Socket Key Tool..
These 12x1.25 lug nuts are not an oem or genuine OE part, but are compatible with Geo, Chevy, Infiniti, Mercury, Nissan, Subaru, Suzuki 5Lug vehicles. We are confident you'll find our lug nuts to be a comparable OEM replacement steel lug nut set, at a significant cost savings..

Check Stock

The ROP Shop Spare Tire Wheel Carrier Kit with Hardware Heavy Duty for Many 6 & 8 Lug Trailers

Spare Tire Wheel Carrier Kit with Hardware, Heavy Duty for Many 6 & 8 lug Trailers.
Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.
Will not fit all 6 & 8 lug rims. Refer to dimensions before purchasing..

Check Stock

4YourHome Complete Hose Assembly Designed for Dyson DC17 Models

FITS DYSON- DC17 All Floors, DC17 Animal, DC17 Asthma and Allergy, DC17 Total Clean.
LONG EXTENSION- Stretches to six times its own length to help you reach those hard to clean spaces around your home and car without having to lug your....
EASY TO USE- Simply push the release to remove the elbow from the base of the vacuum and pull and release from th.
QUALITY OEM- Alternative to genuine part - 911645-07. Full money back guarantee on size, fit and quality of this OEM grade replacement part..

Check Stock

Toro Genuine Original Lawn Mower Recylcer Self Propelled Transmission 106-3955

For Some Toro Front Wheel Drive Mowers. DO NOT order this transmission if your mower is a rear wheel drive mower.
This transmission is NOT threaded from the factory. Use the original self-tapping bolts to create threads in them.
This part will work for the following Toro Lawn Mowers with the models and serial number range below.

Check Stock

ABN 1/2in Impact Drive Lug Nut Socket 5-Piece Set Non-Marring, Color-Coded, Thin-Walled Wheel Rim Protectors

Practical: Use the ABN 1/2 Inch Impact Drive Lug Nut Socket 5-Piece Set Non-Marring, Color-Coded, Thin-Walled Wheel Rim Protectors to remove bolts on vehicle wheels as the protective sleeves prevent damage on custom rims and lug nuts.
Safe: 360 non-scratch sleeve and insert protect bolt tops, wheel rims, and lug nuts from scratches during use.
6-point thin-walled socket constructed from chromium-molybdenum steel (Cr-Mo) which makes the socket strong and long-lasting.
Versatile: Perfect for both factory and aftermarket painted, clear coated, chrome, and other wheels/bolts.
Fits all 1/2-inch drive socket hand wrenches, electric, or air tools.
Hollow design allows room for removing longer bolts.
SAE and metric sizes 17mm, 19mm (3/4), 21mm, 13/16, and 7/8.
Fit most vehicles with these size wheel bolts (Example: 17mm = BMW, Mercedes Benz, Audi, Mini Cooper).
Easy Storage: Heavy-duty 9 x 5 x 2.25 (22.9cm x 12.7cm x 5.7cm) plastic blow-molded carrying case for easy transport, simple storage, and quick organization.
Specifications: Thin-walled, non-marring, and laser etched.
Package includes (5) lug nut sockets + (1) carrying case.

Check Stock

M12x1.5 Lug Nuts with Mag Seat, 13/16' 21mm Hex 1.46x1.18 in. Blackened Wheel Lug Nuts Compatible with Toyota Lexus Scion Isuzu, Set of 24

12x1.5 Lug Nuts --- 24pcs 12mm wheel lug nuts featuring 12x1.5 thread pitch, 21mm (13/16") hex size, OEM mag seat with washer, 1.5" overall length and 1.18" overall width, will fits most Toyota Lexus Scion Isuzu factory wheels.
Toyota Lug Nuts --- M12x1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Toyota Factory Wheels (Exc. Land Cruiser, Tundra and Sequoia Models), Compatible with Toyota Camry, RAV4, Highlander, Corolla, Tacoma, 4Runner, Prius, Sienna & More - WARNING: UNFIT Land-Cruiser, Tundra and Sequoia.
Lexus Lug Nuts --- 12mm x 1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Lexus Factory Wheels (Except LS460, 460h, 600H, LX470, LX570 Models), Such as: Lexus RX, NX, ES, GX, IS, GS, LX, RC, LS, LC, CT, LFA - WARNING: UNFIT LS460, 460h, 600H, LX470, LX570 Models.
Scion & Isuzu Lug Nuts --- 12mm x 1.5 OEM Mag Seat Style Lug Nuts w/ Washer fits Most 5 or 6 Lugs Scion and Isuzu Factory Wheels, Such as: Scion TC, XB, FRS and Isuzu Rodeo, Trooper, NPR, D-max.
Black Lug Nuts ----- Manufactured with cold forged and heat treated steel for dependable strength and durability, paint will not fall off easily.

Check Stock

Performance Tool M980 Emergency Lug Nut Removal Set

Heavy duty impact-grade steel will not split or crack.
13/16-Inch and 1-Inch sizes fit most lug nuts/bolts on most vehicles.
For when the lug nut key is misplaced, lost or lug nuts are worn, stripped or damaged.

Check Stock

Mishimoto - MMLG-125-LOCKBK Aluminum Locking Lug Nuts, M12 x 1.25, Black

OEM FITMENT: Designed to lock onto the OEM shaft, these lug nuts are quality tested and meet the stringent OEM controls.
BLACK FINISH: Get that sleek stealthy black look around your wheels by swapping out your existing lug nuts.
COMPLETE SET: Product includes Corvette lug nut fasteners for all 4 wheels..

Check Stock

10pcs Black Wheel Stud Conversion - 14x1.5 to 12x1.5, 50mm Total Length, 32mm Shank Length - Compatible with Audi Mercedes Volkswagen Cars (Ensure Vehicle uses 14x1.5 Bolts) Screw Adapter

...f it is your first time installing auto accessories. Apply thread-locking fluid to the studs (short thread end) and torque to 20 ft/lb. Lug nuts should be torqued to OEM specifications. For your safety retorque all hardware (studs and nuts) after 25-50 miles..
[FITMENT] Only fits European vehicles with 14x1.5 thread bolts. Compatible with Audi 1999+ TT, 1998+ A3, 2000+ S3, 1996+ A4, 1992+ S4, 2008+ A5 S5, 1995+ A6 S6. Compatible with Audi 1997+ A8, 2016+ A7, 2013+ S7, 2009+ Q5, 2007+ Q7, 2014+ SQ5. Compatible with Volkswagen 2019-2023 Arteon, 1970+ Beetle, 2007-2016 EOS, 1999-2002 Golf, 2006+ GTI, 2000+ Jetta, 2012+ Passat, 2009+ Tiguan. Compatible with BMW 2004-2010 X3, 2000-2006 X5. Also compatible with Mercedes Benz (Must have 14x1.5 lugs)..

Check Stock

StanceMagic - 5mm Hubcentric 5x114.3 and 5x120 Wheel Spacers (64.1mm Bore) Compatible with Acura Honda ILX RL RSX TLX TL TSX MDX RLX Accord Civic Element Prelude S2000 CR-Z - 2pcs

...S2000 (Rear). Check Year/Model in Description. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as being compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
[SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 5x114.3 / 5x120 | Hub Center Bore: 64.1mm | Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. This listing is for spacers only as pictured. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust..
[PRODUCT BENEFITS] Our unique design reduces the weight of the spacers by 50% compared to other spacers on the market, which red....

Check Stock

2pcs 5mm Hubcentric 4x114.3 Wheel Spacers (66.1mm bore) Compatible with Nissan 200sx 240sx 240z 260z 280z 280zx 300zx Altima Maxima Sentra Cube (4x4.5)

...ssan 93-01 Altima, 09-11 Cube, 85-88 Maxima, 00-10 Sentra. Check Year/Make/Model in Description. May fit others, verify using spacer specifications..
[VERIFY FITMENT] Even if a vehicle is listed as compatible, buyers still need to check: 1) You have 5mm of space between your fender and your wheel/tire.
2) Your studs/bolts are the correct length to ensure safe nut/bolt thread engagement.
3) For proper installation you may need aftermarket Extended Lug Bolts or Extended Wheel Studs (NOTE: NOT INCLUDED with this listing).
4) Wheels will center around vehicle's hub lip as long as it is longer than 5mm..
[SPECIFICATIONS] Two (2) Wheel Spacers with No Lip | Thickness: 5mm Wide | Bolt Pattern: 4x114.3 (4x4.5") | Hub Center Bore: 66.1mm | This listing is for Spacers Only, Extended Lug Bolts / Wheel Studs / Additional hardware are Not Included. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust..
[PRODUCT BENEFITS] Hubcentric Spacer Bore fits perfectly around 66.1mm wheel hubs to prevent wobble or vibrations. Fixes clearance issues if your wheels are making contact with your shocks or brake calipers. Increases inner wheel well c....

Check Stock